GB/T 35854-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35854-2018: Mechanical vibration measurement and evaluation for the wind turbines and their components
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35854-2018	359	Add to Cart	4 days	Mechanical vibration measurement and evaluation for the wind turbines and their components	Valid

Similar standards

GB/T 25388.1   GB/T 25387.1   GB/T 25389.2   GB/T 25383   GB/T 32077   

Basic data

Standard ID: GB/T 35854-2018 (GB/T35854-2018)
Description (Translated English): Mechanical vibration measurement and evaluation for the wind turbines and their components
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F11
Classification of International Standard: 27.180
Word Count Estimation: 18,137
Date of Issue: 2018-02-06
Date of Implementation: 2018-09-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 35854-2018: Mechanical vibration measurement and evaluation for the wind turbines and their components

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mechanical vibration measurement and evaluation for the wind turbinesand their components ICS 27.180 F11 National Standards of People's Republic of China Wind turbine and its components mechanical vibration Measurement and evaluation [ISO 10816-21.2015, Mechanicalvibration-Evaluationofmachinevibration bymeasurementsonnon-rotatingparts-Part 21.Horizontalaxiswind Published on.2018-02-06 2018-09-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Measurement 2 5 Equipment 3 6 Vibration Assessment 3 7 Evaluation Standard 5 8 Operating vibration limit 6 9 Vibration Monitoring Recommendation 7 Appendix A (informative) The structural change of this standard compared with ISO 10816-21.2015 8 Appendix B (informative) Technical differences between this standard and ISO 10816-21.2015 and their reasons 10 Appendix C (Informative) Measurement Position 11 Reference 13

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafted law to amend ISO 10816-21.2015 "Mechanical vibration through non-rotating part measurement and evaluation machines Mechanical Vibration Part 21. Horizontal Axis Wind Turbine with Gearbox. Compared with ISO 10816-21.2015, this standard has more structural adjustments. Appendix A lists this standard and ISO 10816-21. 2015 chapter numbering control list. There is a technical difference between this standard and ISO 10816-21.2015. The terms involved in these differences have passed the margin on the outside of the page. The vertical single line (|) of the white position is marked, and Appendix B gives a list of the corresponding technical differences and their causes. This standard has made the following editorial changes. --- Modify the standard name "Measurement and evaluation of mechanical vibration of wind turbine and its components". This standard is proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Wind Machinery Standardization Technical Committee (SAC/TC50). This standard was drafted by. Xinjiang Goldwind Science and Technology Co., Ltd., Beijing Jinfeng Kechuang Wind Power Equipment Co., Ltd., Gemeiyu Wind Power (days (Jin) Co., Ltd., Beijing Jinfeng Huieng Technology Co., Ltd., Xinjiang University, School of Electrical Engineering, Xinjiang University Graduate School, Beijing Tiancheng Tongchuang Electric Co., Ltd. The main drafters of this standard. Tang Xin'an, Fan Degong, Zhang Fang, Ji Xinrui, Li Yue, Yu Liping, Yang Yiming, Gu Fubin, Cao Bo, Wang Haiyun, Wang Weiqing, Wu Xianyou, Huang Xiaofang.

Introduction

The wind velocity field has turbulent flow, shear and other random non-stationary factors, leading to wind turbines subjected to complex aerodynamic loads; wind power generation The unit is a typical variable condition mechanical equipment, so it is subject to inertial forces and other additional loads caused by changing conditions; wind turbine with gear box The transmission chain of the group consists of a series of components that interact with each other, affect, and may generate a source of load excitation, such as. misalignment can cause gearing Intermeshing vibrations may cause resonance of the drive train. In short, the external non-stationary excitation superposition variable condition operation will result in wind turbines and transmissions. The entire wind turbine, including the chain, tower, and foundation, is subjected to complex dynamic loads, which can cause vibration of the whole wind turbine or assembly. And showing complex features. Based on the special structure and complex vibration characteristics of wind turbines, it is currently suitable for evaluating the vibration of buildings and other mechanical equipment. The standard does not apply to wind turbines. The vibration of wind turbines will have a huge impact on the reliability and life of components and components, so wind turbine generator manufacturers and operators Business, insurance companies, and service companies all have requirements for the assessment of mechanical vibration measurement of wind turbines and their components. The purpose of this standard is to regulate the method of measurement of mechanical vibration of wind turbines and their components and to assist in the operation of wind turbines. Evaluation. Once the evaluation parameter exceeds the limit, the measurement result should give the conclusion that the entire wind turbine unit or component is dangerous, but it cannot give Causes of excessive vibration; evaluation parameters do not exceed the limit, it is generally believed that the wind turbine operating conditions are normal, but can not absolutely rule out the wind There is a possibility of damage to the entire unit or component of the generating unit. Wind turbine and its components mechanical vibration Measurement and evaluation

1 Scope

This standard specifies the conditions and methods for measuring and evaluating the mechanical vibration of wind turbines and their components. This standard applies to wind turbines with rated power greater than.200 kW and having the following structural and operating characteristics. --- Support structure consisting of steel tower and concrete foundation; --- Horizontal axis, multiple blades; --- The main bearing is independent or integrated in the gear box; --- The generator is driven by a gearbox or directly driven by a rotor; --- Synchronous generator or asynchronous generator; --- A fixed number of pole generators or a variable pole generator for speed adjustment; --- Output control through pitch or stall; --- The generator is connected to the grid via a converter or directly accessed; --- Active yaw system to maintain the same direction as the wind direction of the engine room. This standard does not apply to the factory test of gearboxes and generators. This standard does not apply to the evaluation of the torsional vibration state of the main bearings and gearboxes on the drive train.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 6075.1-2012 Mechanical vibration measurement on non-rotating parts Evaluation of machine vibration Part 1. General (ISO 10816-1.1995, IDT) GB/T 6075.3-2011 Mechanical vibration measurement on non-rotating parts Evaluation of machine vibration Part 3. Large rated power Industrial machinery for in-situ measurement at 15 kW nominal speeds from 120 r/min to 15000 r/min (ISO 10816-3.2009, IDT) GB/T 14412-2005 Mechanical installation of mechanical vibration and impact accelerometers (ISO 5348.1998, IDT) GB/T 18451.1-2012 Design Requirements for Wind Turbines (IEC 61400-1.2005, IDT) GB/T 19873.1-2005 Machine condition monitoring and diagnostic vibration condition monitoring Part 1. General (ISO 13373-1. 2002, IDT) NB/T 31004-2011 Guidelines for vibration condition monitoring of wind turbines

3 Terms and Definitions

The terms and definitions defined in GB/T 18451.1-2012 and the following apply to this document. 3.1 Acceleration evaluation parameters assessmentaccelerationparameters Aw0 The effective value of acceleration in a given frequency band measured over a period of time. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35854-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35854-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35854-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35854-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.