GB/T 35612-2024 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35612-2024: Green product assessment - Wood-plastic composites Status: Valid GB/T 35612: Historical versions
Basic dataStandard ID: GB/T 35612-2024 (GB/T35612-2024)Description (Translated English): Green product assessment - Wood-plastic composites Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Z04 Classification of International Standard: 13.020.10 Word Count Estimation: 13,149 Date of Issue: 2024-06-29 Date of Implementation: 2025-01-01 Older Standard (superseded by this standard): GB/T 35612-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 35612-2024: Green product assessment - Wood-plastic composites---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standards of People's Republic of China ICS 13.020.10CCS Z 04 Green Product Evaluation of Wood Plastic Products Green product assessment-Wood⁃plastic composites 2024-06-29 Release 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB/T 35612-2017 ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 35612-2017 "Green Product Evaluation of Wood-Plastic Products". Compared with GB/T 35612-2017, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows. a) The definition of green wood-plastic products has been changed (see 3.1, 3.1 of the.2017 edition); b) The basic requirements have been changed (see 4.1.4, 4.1.6~4.1.7, and 4.1.1~4.1.3 of the.2017 edition); c) Added the classification of evaluation index benchmark values, whether there is a wastewater treatment device in the environmental attributes, and the transferable harmful elements in the quality attributes. Limited, mildew resistance among quality attributes, mildew resistance durability among quality attributes and low carbon attributes (see Table 1); d) Changed the reference value of recycled raw material addition rate in resource attributes, reference value of packaging environmental protection, reference value of flame retardant in quality attributes, Baseline values (see Table 1, Table 1 of the.2017 edition); e) Deleted the heavy metals in the base material (co-extrusion layer) and the heavy metals in the finishing layer (limited color paint) in the quality attributes (see Table 1 of the.2017 edition); f) The evaluation method has been changed (see Chapter 5, Chapter 5 of the.2017 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Building Materials Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lightweight and Decorative Building Materials (SAC/TC 195). This document was drafted by. Henan Product Quality Inspection Technology Research Institute, China National Institute of Standardization, MEMSIC Technology Co., Ltd., Ningbo Helong New Materials Co., Ltd., Shaoxing Yongsheng New Materials Co., Ltd., and Hebei Hongzhimu Environmental Protection Technology Co., Ltd. The main drafters of this document are. Feng Bo, Zhu Yi, Ma Yizhu, Lin Dongrong, Ma Qingjiang, Zhao Lei, Wang Yongbin, Liu Jing, and Li Tianyi. This document was first published in.2017 and this is the first revision. Green Product Evaluation of Wood Plastic Products1 ScopeThis document specifies the evaluation requirements and methods for green product evaluation of wood-plastic products. This document is applicable to the product evaluation of green wood-plastic products.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2589 General rules for calculation of comprehensive energy consumption GB/T 7119 Guidelines for the evaluation of water-saving enterprises GB 6675.4-2014 Safety of toys Part 4.Migration of certain elements GB/T 15337 General rules for atomic absorption spectrometry GB 17167 General rules for the allocation and management of energy metering instruments in energy-consuming units GB/T 17657-2022 Test methods for physical and chemical properties of wood-based panels and veneer wood-based panels GB/T 18455 Packaging Recycling Mark GB 18580 Limits of formaldehyde emission from artificial boards and their products for interior decoration and renovation GB/T 19001 Quality Management System Requirements GB/T 22048 Determination of certain phthalate plasticizers in toys and children's products GB/T 23331 Energy Management System Requirements and Usage Guide GB/T 24001 Environmental Management System Requirements and Usage Guide GB/T 26125 Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) in electronic and electrical products GB/T 29365-2012 Test method for artificial weathering of wood-plastic composites GB/T 29899 Test method for emission of volatile organic compounds from wood-based panels and their products - Small emission chamber method GB/T 32161 General principles for eco-design product evaluation GB/T 33761 General principles for green product evaluation GB/T 35469-2017 Test method for mildew resistance of building wood-plastic composite materials GB/T 37837 General rules for quadrupole inductively coupled plasma mass spectrometry GB/T 45001 Occupational health and safety management system requirements and usage guidelines GBZ 1 Industrial Enterprise Design Hygiene Standard GBZ /T 189.8 Measurement of physical factors in the workplace Part 8.Noise GBZ /T 192.1 Determination of dust in workplace air Part 1.Total dust concentration JC/T 2222 Terminology of Wood-Plastic Composite Materials LY/T 2554 Determination of biomass content in wood-plastic composites - Fourier transform infrared spectroscopy ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35612-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 35612-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35612-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35612-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 35612-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 35612-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
