GB/T 35603-2024 English PDFUS$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35603-2024: Green product assessment - Sanitary wares Status: Valid GB/T 35603: Historical versions
Basic dataStandard ID: GB/T 35603-2024 (GB/T35603-2024)Description (Translated English): Green product assessment - Sanitary wares Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Z04 Classification of International Standard: 13.020.10 Word Count Estimation: 22,252 Date of Issue: 2024-06-29 Date of Implementation: 2025-01-01 Older Standard (superseded by this standard): GB/T 35603-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 35603-2024: Green product assessment - Sanitary wares---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standards of People's Republic of China ICS 13.020.10CCS Z 04 Green Product Evaluation of Sanitary Ceramics 2024-06-29 Release 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replace GB/T 35603-2017 Table of ContentsPreface... 1 Scope... 2 Normative referenced documents... 3 Terms and Definitions... 4 Evaluation requirements... 5 Evaluation method... Appendix A (Normative) Indicator Calculation Method... Appendix B (Informative) Example of Carbon Footprint Report for Sanitary Ceramic Products... References...ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 35603-2017 "Green Product Evaluation of Sanitary Ceramics". Compared with GB/T 35603-2017, In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope has been changed (see Chapter 1, Chapter 1 of the.2017 edition); b) Deleted the definitions of “unit product comprehensive energy consumption”, “environmental product declaration” and “carbon footprint” (see 3.1, 3.2, 3.3); c) The requirement of “product classification” has been deleted (see Chapter 4 of the.2017 edition); d) The requirements for “Product Packaging” have been changed (see 4.1.1.1, Table 1 of the.2017 edition); e) Added the requirements for “main packaging materials” (see 4.1.1.1); f) The requirement of “conducting green supply chain management” has been deleted (see 5.1.1.1 of the.2017 version); g) Changed the requirements for “clean energy” (see 4.1.1.2, 5.1.1.2 of the.2017 edition); h) Changed the requirements for “advanced technology and processes” (see 4.1.1.2, 5.1.1.2 of the.2017 edition); i) Added "integrated intelligent toilet" and related requirements (see 4.1.2, 4.2.2); j) The requirements for “resource attributes” have been changed (see Table 1, Table 1 of the.2017 version); k) Changed the requirements for “Energy Properties” (see Table 2, Table 1 of the.2017 edition); l) Added the requirements for “environmental attributes” (see Table 1); m) The requirements for “quality attributes” have been changed (see Table 1, Table 1 of the.2017 edition); n) Added the requirement of “low carbon attributes” (see Table 1). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Building Materials Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Building Sanitary Ceramics (SAC/TC 249). This document was drafted by. China National Testing Holding Group Shaanxi Co., Ltd., Hengjie Sanitary Ware Group Co., Ltd., Xianyang Ceramic Research Institute China Academy of Standardization, China National Institute of Standardization, Jomoo Kitchen & Bathroom Co., Ltd., Huida Sanitary Ware Co., Ltd., Arrow Home Furnishing Group Co., Ltd. Co., Ltd., Toto (China) Co., Ltd., Guangdong Shanggao Technology Co., Ltd., Chongqing Guozhisiwei Sanitary Ware Co., Ltd., Guangdong Anpic Technology Co., Ltd., Xiamen Jiayu Intelligent Sanitary Ware Co., Ltd., American Standard (China) Co., Ltd., China Light Industry Ceramics Research Institute, Guangdong Difulong Kitchen & Bathroom Technology Co., Ltd., Tangshan Mengpai Ceramics Co., Ltd., Guangdong Dongzi Sanitary Ware Technology Co., Ltd., Guangdong Dongpeng Holdings Co., Ltd. Xiamen Yousheng Kitchen and Bathroom Technology Co., Ltd., Roca (China) Co., Ltd., Shijiazhuang Customs Technology Center, Chaozhou Hongle Sanitary Ware Technology Co., Ltd. Limited company. The main drafters of this document are. Zhang Fan, Bai Xue, Wang Bo, Shang Bei, Zhu Yi, Xie Xufan, Lin Xiaowei, Liu Chuan, Wang Kaifang, Zhang Yihan, Zhang Xin, Yan Haochun, Chang Hao, Zhang Xuesong, Li Hongshun, Bai Hubin, Zong Jianfang, Yin Jun, Feng Jianfeng, Wang Shiyou, Su Yaobing, Li Xiaoman, Cao Chen, Zhou Yufang, Xu Dayu, Zhu Ruijuan, Meng Linglai, Lu Jianwei, Shi Jinping, Li Feiyu, Peng Yiqun, Wang Xuecheng, Li Wenjie, Li Dongyuan, Chen Xiaotong. This document was first published in.2017 and this is the first revision. Green Product Evaluation of Sanitary Ceramics1 ScopeThis document specifies the evaluation requirements for green sanitary ceramic products and describes the evaluation methods. This document applies to green products for sanitary ceramics, including toilets, integrated smart toilets, squat toilets, urinals and washbasins. Product evaluation.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2589 General rules for comprehensive energy consumption calculation GB 6566 Limits of radionuclides in building materials GB/T 6952 Sanitary Ceramics GB/T 9195 Classification and terminology of building sanitary ceramics GB 12348 Environmental noise emission standard for industrial enterprises GB 17167 General rules for the allocation and management of energy metering instruments in energy-consuming units GB/T 19001 Quality Management System Requirements GB 21252 Energy consumption limits per unit product for building sanitary ceramics and wear-resistant alumina balls GB/T 23331 Energy Management System Requirements and Usage Guide GB/T 23448 Sanitary ware hose GB/T 24001 Environmental Management System Requirements and Usage Guide GB/T 24256 General Principles for Product Ecodesign GB/T 24789 General rules for the allocation and management of water metering instruments in water-using units GB/T 24851 Requirements for the deployment and management of energy metering equipment in the building materials industry GB 25464 Pollutant emission standard for ceramic industry GB 25502 Water efficiency limit values and water efficiency grades for toilets GB/T 26572 Limit requirements for restricted substances in electronic and electrical products GB/T 26730 Gravity flushing devices and sanitary ware racks for sanitary ware toilets GB/T 26750 Pressure flushing devices for sanitary ware toilets GB 28377 Limit values and grades of water efficiency for urinals GB 28379 Water efficiency limit values and water efficiency grades for toilet flush valves GB 30717 Water efficiency limit values and water efficiency grades for squat toilets GB/T 31436 Water-saving sanitary ware GB/T 33761 General principles for green product evaluation GB/T 34549 Sanitary ware Intelligent toilet GB 38448 Energy and water efficiency limits and grades for smart toilets GB/T 41863 General technical requirements for water-saving performance of non-contact water supply equipment ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35603-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 35603-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35603-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35603-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 35603-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 35603-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
