GB/T 3533.1-2017 English PDFUS$499.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3533.1-2017: Standardization benefit evaluation -- Part 1: General principles of economic benefit evaluation Status: Valid GB/T 3533.1: Historical versions
Basic dataStandard ID: GB/T 3533.1-2017 (GB/T3533.1-2017)Description (Translated English): Standardization benefit evaluation -- Part 1: General principles of economic benefit evaluation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 01.120 Word Count Estimation: 25,226 Date of Issue: 2017-05-12 Date of Implementation: 2017-12-01 Older Standard (superseded by this standard): GB/T 3533.1-2009 Quoted Standard: GB/T 3533.3 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the principles and methods for evaluating, calculating and demonstrating standardized economic benefits. This standard applies to the economic benefits of forecasting, evaluating and calculating the implementation criteria. GB/T 3533.1-2017: Standardization benefit evaluation -- Part 1: General principles of economic benefit evaluation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Standardization benefit evaluation - Part 1. General principles of economic benefit evaluation ICS 01.120 A00 National Standards of People's Republic of China Replace GB/T 3533.1-2009 Standardized Benefit Evaluation Part 1. General Principles of Economic Benefit Evaluation Standardizationbenefitevaluation-Part 1. General principles of equitybenefitevaluation 2017-05-12 released 2017-12-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 Principles for evaluation, calculation and demonstration of standardized economic benefits 4.1 Principles for the evaluation and calculation of standardized economic benefits 2 4.2 Principles for Standardizing Economic Benefits 2 4.3 the timing of forecasting, evaluating and calculating standardized economic benefits Methodology for Evaluating and Calculating Standardized Economic Benefits 5.1 Value chain analysis method 3 5.2 Production function method 3 5.3 Fuzzy comprehensive evaluation method 3 Calculation of Standardized Economic Benefit 6.1 Basic Calculation of Standardized Economic Benefit Dynamic Calculation of Standardized Economic Benefit Index Appendix A (informative) Standardization of economic benefits Appendix B (Informative Annex) Example of Standardized Economic Benefit Argument Table 6 Appendix C (normative) CD production function model 7 Appendix D (normative appendix) Standardization of all aspects of the value chain Useful indicators 8 Appendix E (informative) Standardization of the main indicators of the usefulness of the calculation formula 11 Appendix F (Normative Appendix) Calculation of Standardized Economic Benefit 18 Appendix G (normative appendix) Dynamic calculation formula and conversion factor for standardized savings and investment Table 20 Reference 22 ForewordGB/T 3533 "Standardized Benefit Evaluation" is divided into the following two parts. - Part 1. General principles of economic benefit evaluation; Part 2. General Principles of Social Benefits Assessment. This part is part 1 of GB/T 3533. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement of GB/T 3533.1-2009, compared with GB/T 3533.1-2009, in addition to editorial changes to the main technical changes as follows. --- the standard full text of the "effect" into "efficiency", "benefits" modified to "efficiency"; The scope of the standard is amended to read "This section applies to the economic benefits of forecasting, evaluating and calculating the implementation criteria"; - modified seven terms, "standardized labor costs" (see 3.2), "standardized and useful effects" (see 3.1); "standardized investment recovery (See section 3.10), the "base year" (see 3.5), the "assessment year" (see 3.6); the term "standard" (See 3.3), "Standardized Economic Benefits" (see 2009 version 3.4) was revised to "standardized economic efficiency" (see 3.4); the definition of the term "value drivers" was added (See 3.11); the term "standardized economic effect factor" was deleted (see 3.7 in.2009); --- removed the fourth edition of the.2009 edition; - merging Chapter 6 and Chapter 5 of the.2009 edition into 4.3; - Chapter 7 of the.2009 edition is incorporated into Appendix A of this Part to become A.3; --- increase from the national, industry, enterprise level standardization of economic evaluation of the principles and methods; --- delete the.2009 version of Appendix A "standardized economic effects of the symbol", modified as "standardized economic benefits of the demonstration method"; - Appendix B is amended to "an example of a standardized economic benefit demonstration form"; - Added Appendix C "CD Production Function Model"; - Appendix D is revised to "Standardized and useful indicators of the value chain"; - Appendix E is amended to read as "the formula for the calculation of the main indicators of normalization and effectiveness", as amended by the normative appendix to the data appendix; - the addition of the appendix F to the calculation of standardized economic performance indicators; - Appendix B, "Dynamic Calculation Formula and Conversion Factor for Standardized Savings and Investments" in the.2009 edition is amended to appendix G to this section. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This part of the National Standardization Principles and Methods Standardization Technical Committee (SAC/TC286) proposed and centralized. This part of the drafting unit. China Institute of Standardization, the Chinese People's Liberation Army National Defense Science and Technology University, mechanical industry instrumentation integrated Technology and Economic Research Institute, Haier Group. The main drafters of this part are. Fu Qiang, Wang Yiyi, Huang Chaofeng, Ouyang Jinsong, Pang Zhenghu, Liu Hui, Wang Lijun, Wu Xuejing, Zhao Wenhui, Ji Jianqiang. This part of the previous version of the standard to replace the release of the situation. --- GB/T 3533.1-1983, GB/T 3533.1-2009; --- GB/T 3533.2-1984. Standardized Benefit Evaluation Part 1. General Principles of Economic Benefit Evaluation1 ScopeThis part of GB/T 3533 sets out the principles and methods for the evaluation, calculation and demonstration of standardized economic benefits. This section applies to the economic benefits of forecasting, evaluating and calculating the implementation criteria.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 3533.3 Evaluation and calculation of standardized economic data data collection and processing methods3 terms and definitionsThe following terms and definitions apply to this document. 3.1 Standardize useful effects usefuleffectofstandardization Development and implementation of the standards of savings and benefits, such as product yield, procurement/production and transaction costs, The expansion of market size, the improvement of production and engineering efficiency and the reduction of various activities. Note. The development of this standard includes revision. 3.2 Standardized labor costs The sum of the labor and materialized labor costs paid by the development and implementation of standards, that is, standardized investment. Note. Living labor consumption refers to the labor of the technical activities, production and construction of labor consumption, refers to labor input; materialized labor costs refers to raw materials, Power, tools and other direct consumption and equipment, plant, working capital occupation, refers to the capital investment. 3.3 Standardized Economic Benefits economicbenefitofstandardization Standardization of useful effects (3.1) and standardized labor costs (3.2). 3.4 Standardized economic efficiency Standardized usefulness (3.1) vs. standardized labor cost (3.2). 3.5 Base year benchmarkyear When evaluating standardized economic benefits (3.3) and standardized economic efficiency (3.4), the standard will be used as the base year for the comparison. 3.6 Evaluation year valuationyear (3.3) and standardized economic efficiency (3.4), the year after the implementation of the standard and the base year (3.5). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3533.1-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 3533.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3533.1-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3533.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3533.1-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3533.1-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
