GB/T 35205.2-2023 English PDFUS$964.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 35205.2-2023: Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks Status: Valid
Basic dataStandard ID: GB/T 35205.2-2023 (GB/T35205.2-2023)Description (Translated English): Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 53.060 Word Count Estimation: 52,588 Date of Issue: 2023-05-23 Date of Implementation: 2023-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 35205.2-2023: Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 53:060 CCSJ83 National Standards of People's Republic of China Safety requirements and verification of off-road forklifts Part 2: Swivel forklifts Part 2: Slewing trucks (ISO 10896-2:2016, IDT) Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 4 4 requests 9 4:1 General 9 4:2 Start/run 9 4:3 Braking device 10 4:4 Electrical and Electronic Systems 10 4:5 Control device 11 4:6 Power system and its accessories 14 4:7 Stabilizer 15 4:8 Consider design requirements for maintenance 15 4:9 Lifting, tilting and telescoping systems 15 4:10 Normal operating position 17 4:11 Operator channel 20 4:12 Protective measures and devices 21 4:13 Stability 22 4:14 Operating Field of View 22 4:15 External lighting 22 4:16 Fire Protection 22 4:17 Rescue, transportation, lifting and towing 22 4:18 Noise 23 4:19 Structural calculations 23 5 Verification of requirements and safety measures 26 5:1 General 26 5:2 Functional Verification 26 5:3 Structural Verification 26 5:4 Verification of the maximum descent speed with load 27 5:5 Load retention 27 6 Usage information 27 6:1 General 27 6:2 Operation and Maintenance Instructions 28 6:3 Flags 29 6:4 Load curve 29 Appendix A (informative) List of major hazards 31 Appendix B (Normative) Attachments and Quick Connectors 36 B:1 Attachments 36 B:2 Quick connector (quick lock to prevent falling off) 37 B:3 Identification 37 B:4 Instructions 37 B:5 Forks 37 Appendix C (Informative) Consistency of Load Handling Control Action Direction 39 Appendix D (Informative) Examples of Regular Loads and Temporary Loads 41 D:1 Normal loads 41 D:2 Temporary loads 41 Reference 42forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is the second part of GB/T 35205 "Safety Requirements and Verification of Off-Road Forklifts": GB/T 35205 has issued the following part: --- Part 1: Telescopic forklifts; --- Part 2: Rotary forklift; --- Part 5: Connecting devices for telescopic forklifts and integrated personnel working platforms; --- Part 6: Inclined cab; --- Part 7: Longitudinal load moment system: This document is equivalent to ISO 10896-2:2016 "Safety Requirements and Verification of Off-Road Forklifts - Part 2: Rotary Forklifts": Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Industrial Vehicle Standardization Technical Committee (SAC/TC332): This document is drafted by: Nuoli Intelligent Equipment Co:, Ltd:, Beijing Lifting and Transportation Machinery Design and Research Institute Co:, Ltd:, Anhui Haoyun Machinery Co:, Ltd:, Fujian Weisheng Machinery Development Co:, Ltd:, Ningbo Ruyi Co:, Ltd:, Henan Jiachen Intelligent Control Co:, Ltd: company: The main drafters of this document: Zheng Wenming, Zhang Jinxia, Feng Ping, Xiao Chaohai, Xiao Zineng, Fu Min, Li Fei:IntroductionWith its unique structure and a variety of attachments that it can be equipped with, off-road forklifts are capable of working on many different types of vehicles: The application is extremely wide, and foreign countries already have a complete technical standard system for off-road forklifts: At present, some domestic manufacturers have entered this field: The international high-end market has strict access requirements: In order to break the technical barriers to trade, we have accelerated the transfer of international standards for off-road forklifts: In order to make our country's off-road forklift safety requirements and verification methods in line with international standards as soon as possible: GB/T 35205 "Safety Requirements and Verification of Off-Road Forklifts" aims to establish safety requirements and verification methods for off-road forklifts: GB/T 35205 The following sections are proposed for publication: --- Part 1: Telehandlers: The purpose is to specify the safety requirements and verification of telescopic forklifts: --- Part 2: Rotary forklift: The purpose is to specify the safety requirements and verification of rotary forklifts: --- Part 3: Truck-mounted forklifts: The purpose is to specify the safety requirements and verification of truck-mounted forklifts: --- Part 4: Additional requirements for lifting and transporting freely swingable load telescopic forklifts: The purpose is to stipulate that the lifting can swing freely Safety requirements and verification of additional requirements for load telescopic forklifts: --- Part 5: Connecting devices for telescopic forklifts and integrated personnel work platforms: The purpose is to specify that telehandlers and Safety requirements and verification of connection devices between integrated personnel working platforms: --- Part 6: Inclined cab: The purpose is to provide for the installation of tilting cabs on telehandlers and slewing forklifts security requirements and verification: --- Part 7: Longitudinal load moment system: The purpose is to specify the design, Security requirements and verification: See ISO 20297-1 for safety requirements and verification of truck-mounted forklifts: Safety requirements and verification of off-road forklifts Part 2: Swivel forklifts1 ScopeThis document specifies the general safety requirements for off-road type rotary telescopic forklifts (hereinafter referred to as "forklifts"): This type of forklift consists of a lower chassis It is composed of the upper slewing structure, and the upper slewing structure is equipped with a telescopic arm lifting device (articulated arm), which is usually equipped with a pick-up device (such as cargo fork and fork): Forks and other integral attachments are considered part of the forklift: In addition to the relevant clauses of this document, other parts of this document also apply to these attachments: This document does not apply to the following: a) Off-road type telescopic forklift (non-rotating), see ISO 10896-1; b) For industrial telehandlers, see ISO 3691-2; c) mobile cranes; d) machinery designed primarily for earthmoving operations (e:g: loaders), even if their buckets are replaced by forks (see ISO 20474); e) Designed to be mainly carried by variable-length lifting suspension components (such as chains, wire ropes), and the load can swing freely in all directions vehicle; Note: For vehicles with loads that can swing freely in all directions, the additional requirements for vehicle lifting devices and attachments, manned/working platforms shall be determined by ISO /TC110/SC4 is under development: f) Vehicles designed primarily for handling containers: The significant hazards covered by this document are listed in Appendix A: This document does not address the hazards that may occur in the following situations: --- During the manufacturing process; --- When handling suspended loads that can swing freely; --- When lifting personnel; --- When used on the road; --- When used in potentially explosive atmospheres; ---Battery, liquefied petroleum gas (LPG) or hybrid power as the main power source:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 15706-2012 Risk Assessment and Risk Reduction of Machinery Safety Design General Principles (ISO 12100:2010, IDT) GB/T 17300-2017 Access devices for earth-moving machinery (ISO 2867:2011, IDT) GB/T 17922-2014 Laboratory tests and performance requirements for rollover protective structures of earth-moving machinery (ISO 3471:2008, IDT) ISO 2328 Forklift hook-type forks and fork carriage installation dimensions (Fork-lifttrucks-Hook-ontypeforkarms Note: GB/T 5184-2016 Forklift hook type fork and fork frame installation dimensions (ISO 2328:2011, IDT) ISO 2330 Forklift fork technical requirements and test methods (Fork-lifttrucks-Forkarms-Technicalcharac- ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35205.2-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 35205.2-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 35205.2-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35205.2-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
