GB/T 3517-2022 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3517-2022: Rubber, raw natural - Determination of plasticity retention index (PRI) Status: Valid GB/T 3517: Historical versions
Basic dataStandard ID: GB/T 3517-2022 (GB/T3517-2022)Description (Translated English): Rubber, raw natural - Determination of plasticity retention index (PRI) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B72 Classification of International Standard: 83.040.10 Word Count Estimation: 14,118 Date of Issue: 2022-10-12 Date of Implementation: 2022-10-12 Older Standard (superseded by this standard): GB/T 3517-2014 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 3517-2022: Rubber, raw natural - Determination of plasticity retention index (PRI)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rubber, raw natural - Determination of plasticity retention index (PRI) ICS 83.040.10 CCSB72 National Standards of People's Republic of China Replacing GB/T 3517-2014 Determination of Plasticity Retention Ratio (PRI) of Natural Raw Rubber (ISO 2930.2017, MOD) Released on 2022-10-12 2022-10-12 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 instrument 2 6 Operating procedure 2 7 results show 3 8 Precision 3 9 Test report 3 Appendix A (Informative) PRI Determination of Air Change in Aging Chamber 4 Appendix B (informative) Notes on the precision of plasticity retention 6 Reference 8forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document replaces GB/T 3517-2014 "Determination of Plasticity Retention Ratio (PRI) of Natural Raw Rubber", and is consistent with GB/T 3517-2014 In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope has been changed (see Chapter 1, Chapter 1 of the.2014 edition); b) Added the chapter "Terms and Definitions" (see Chapter 3); c) Changed the normative reference documents, changed GB/T 3510 to an undated reference document (see Chapter 4, 5.1, 5.2, 5.7, 6.1, 6.3, 4.7 of the.2014 edition); d) Changed the requirements for the aging box (see 5.5, 4.5 of the.2014 edition); e) Changed the regulations on lightweight aluminum plates and trays (see 5.6, 4.6 of the.2014 edition); f) Added the requirements for cigarette paper (see 5.7, 4.7 of the.2014 edition); g) Changed the text description of the preparation part of the sample and the thickness range of the sample (see 6.1, 5.1 of the.2014 edition); h) The provision on preheating trays and aluminum dishes was deleted (see 5.2 of the.2014 edition); i) Changed the regulations on starting timing in the aging operation (see 6.2, 5.2 of the.2014 edition); j) Change the determination time of the post-aging test (see 6.3, 5.3 of the.2014 edition); k) The test report has been changed (see Chapter 9, Chapter 8 of the.2014 edition). This document is modified to adopt ISO 2930.2017 "Determination of Plasticity Retention Ratio (PRI) of Natural Raw Rubber". The technical differences between this document and ISO 2930.2017 and their reasons are as follows. --- Added the applicable boundary of the document (see Chapter 1) to meet the requirements of GB/T 1.1-2020; --- ISO 23529.2016 (see 6.3) was replaced with GB/T 2941-2006 to adapt to my country's rubber physical test method samples Prepare and regulate general program requirements; --- ISO.2007 was replaced by GB/T 3510 (see Chapter 4, 5.1, 5.2, 5.7, 6.1, 6.3) to adapt to the use of rapid plasticity in my country Requirements for determination of plasticity by counting method; --- ISO 2393 (see 5.4) was replaced with GB/T 6038 to adapt to my country's requirements for rubber test compound batching, mixing and vulcanization equipment and operating procedure requirements; ---Change the regulation on "lightweight aluminum dishes and trays" from a recommendation to a requirement (see 5.6, 5.6 of ISO 2930.2017) to meet the aging test inspection requirements; --- ISO 1795 (see 6.1) was replaced with GB/T 15340 to meet the requirements of sampling and sample preparation for natural rubber in my country. The following editorial changes have been made to this document. --- Modify the symbol of the formula to the domestic customary symbol (see Chapter 7, Chapter 7 of ISO 2930.2017); --- Change the reference ISO /T R9272 to GB/T 14838 (see B.1, B.1 of ISO 2930.2017), because ISO /T R9272 No currently valid version. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is sponsored by the National Rubber and Rubber Products Standardization Technical Committee Natural Rubber Sub-Technical Committee (SAC/TC35/SC8) Focus on. This document is drafted by. Institute of Agricultural Products Processing, Chinese Academy of Tropical Agricultural Sciences, Gotwell Scientific Instruments (Qingdao) Co., Ltd., Zhongce Rubber Group Co., Ltd., Yunnan Provincial Natural Rubber and Coffee Product Quality Supervision and Inspection Station. The main drafters of this document. Liu Hongchao, Yu Heping, Wang Peng, Li Jian, Yu Long, Lu Guang, Wang Qifang, Liu Li, Wang Kui, Zhang Jiangmei. This document was first released in 1983, revised for the first time in.1992, revised for the second time in.2002, and revised for the third time in.2014. Fourth revision. Determination of Plasticity Retention Ratio (PRI) of Natural Raw Rubber Caution --- Personnel using this document need to have practical experience in formal laboratory work. This document does not address all possible security issues question. It is the user's responsibility to take appropriate safety and health measures and ensure compliance with the conditions stipulated in the relevant national laws and regulations.1 ScopeThis document describes a method for determining the plasticity retention (PRI) of natural rubber. PRI is a measure of the thermal oxygen aging resistance of natural raw rubber, and the higher the value, the better the thermal oxygen aging resistance. PRI is not an absolute value, right Absolute classification cannot be given due to the plasticity values of different natural rubbers after thermo-oxidative aging. This document applies to the determination of natural raw rubber PRI.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 2941-2006 Rubber physical test methods Specimen preparation and general procedures for conditioning (ISO 23529.2004, IDT) GB/T 3510 Determination of Plasticity of Unvulcanized Rubber Rapid Plastometer Method (GB/T 3510-2006, ISO.2007.1997, IDT) GB/T 6038 Rubber test compound batching, mixing and vulcanization equipment and operating procedures (GB/T 6038-2006, ISO 2393. 1994, MOD) GB/T 15340 Sampling of natural and synthetic raw rubber and its sample preparation method (GB/T 15340-2008, ISO 1795.2000, IDT)3 Terms and DefinitionsThe following terms and definitions apply to this document. ISO and IEC have established terminology databases for standardization purposes. The websites are as follows. 3.1 Plasticity value plasticitynumber Under the specified pressure, time and temperature conditions, the thickness of the sample after deformation is taken as the measure of plasticity. 3.2 The ratio of the plasticity value (3.1) of the sample after aging in hot air at 140°C for 30 minutes to the plasticity value (3.1) before aging.4 principlesUse a parallel plate plasticity meter with a diameter of 10mm to measure the unaged The rapid plasticity value of the sample and the sample after heating and aging in the aging box at 140°C for 30 minutes. PRI is the ratio of the rapid plasticity value (P30) of the sample after heat aging to the unaged rapid plasticity value (P0) multiplied by 100. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3517-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 3517-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3517-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3517-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3517-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3517-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
