GB/T 35095-2018 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35095-2018: Pi tapes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35095-2018	179	Add to Cart	3 days	Pi tapes	Valid

Similar standards

GB/T 40742.3   GB/T 40742.1   GB/T 26093   GB/T 45683   GB/T 33523.73   

Basic data

Standard ID: GB/T 35095-2018 (GB/T35095-2018)
Description (Translated English): Pi tapes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J42
Classification of International Standard: 17.040.30
Word Count Estimation: 9,983
Date of Issue: 2018-05-14
Date of Implementation: 2018-12-01
Regulation (derived from): National Standards Announcement No. 6 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 35095-2018: Pi tapes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(π ruler) ICS 17.040.30 J42 National Standards of People's Republic of China π ruler Pitapes Published on.2018-05-14 2018-12-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Standardization Technical Committee for Measuring Instruments (SAC/TC132). This standard is drafted by. Hangzhou Chang Geng Measurement Technology Co., Ltd. Participated in the drafting of this standard. China Metrology University, Chengdu Tool Research Institute Co., Ltd., Shenyang Jiayu Tools Co., Ltd., Chengdu Fine Bo Diameter Precision Measurement Institute, Liaoning Institute of Metrology, Dalian Metrology and Testing Institute, Sichuan Province (National) major technical equipment Geometric quantity measurement station, Zhejiang Times Measurement Technology Co., Ltd. The main drafters of this standard. Liu Wei, Zhao Jun, Jiang Zhigang, Zhao Xia, Yu Bo, Wu Xiaoqi, Liu Na, Shi Zuode, Wu Xiaofeng, Kong Ming. π ruler

1 Scope

This standard specifies the terms and definitions, types and basic parameters, requirements, test conditions, test methods, signs and packaging. This standard applies to the graduation value of 0.01mm, 0.02mm and 0.05mm, and the diameter measurement range is 9mm~5000mm.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 17163-2008 Geometrical quantity measuring instrument terminology basic terminology

3 Terms and definitions

The following terms and definitions as defined in GB/T 17163-2008 apply to this document. 3.1 π feet pitapes a measuring device with a set of (primary and secondary scales) or multiple sets of ordered ruler marks and scales for measuring The diameter of the circular object to be measured. 3.2 Coincidence deviation deviationofcoincidence When the “zero” ruler mark on the sub-scale is coincident with a ruler mark on the main ruler, the “tail” ruler mark on the sub-scale is associated with the main ruler. The ruler should mark the difference that does not coincide.

4 type and basic parameters

4.1 type The type of π ruler is shown in Figure 1 to Figure 3. The illustrations are for illustrative purposes only and do not represent a detailed structure. Description. 1---sub-scale; 2---foot tape; 3---main ruler. Figure 1 Schematic diagram of the strip π rule structure ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35095-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35095-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35095-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35095-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.