GB/T 34329-2017 English PDF

US$1299.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34329-2017: General requirements of fiber reinforced plastics pressure vessel
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34329-2017	1299	Add to Cart	10 days	General requirements of fiber reinforced plastics pressure vessel	Valid

Similar standards

GB/T 40388   GB/T 39491   GB/T 36262   GB/T 45467   GB/T 45129   

Basic data

Standard ID: GB/T 34329-2017 (GB/T34329-2017)
Description (Translated English): General requirements of fiber reinforced plastics pressure vessel
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q23
Classification of International Standard: 83.120
Word Count Estimation: 65,668
Date of Issue: 2017-10-14
Date of Implementation: 2018-09-01
Regulation (derived from): National Standard Announcement 2017 No. 26
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34329-2017: General requirements of fiber reinforced plastics pressure vessel

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements of fiber reinforced plastics pressure vessel ICS 83.120 Q23 National Standards of People's Republic of China Fiber-reinforced plastic pressure vessels - General requirements 2017-10-14 Published 2018-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 classification and marking 2 5 material 3 6 design 3 7 made 37 8 quality inspection and requirements 40 9 logo, packaging, transportation and storage 44 Factory Information 44 Appendix A (Normative) Analysis and Design Method (Discontinuous Analysis) 46 Appendix B (Informative) Fiber-reinforced plastic pressure vessel technology assessment 51 Appendix C (Normative) Thermoplastic lining and structural layer interface shear strength test method 54 Appendix D (Informative) Fiber reinforced plastics pressure vessels Acoustic emission detection methods 57

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard proposed by the China Building Materials Federation. This standard by the National Fiber Reinforced Plastics Standardization Technical Committee (SAC/TC39) centralized. This standard was drafted unit. Nanjing New Nuclear Composite Materials Co., Ltd., Shengli Oilfield new large pipe technology development limited liability company, Jizhou Italy Composite Materials Co., Ltd., Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Tianhua Chemical Machinery and Automation Research and Design Institute have Limited, Hangzhou Zhonghao Technology Co., Ltd., Hebei Knight FRP Co., Ltd., Aixi composite materials (Jiaxing) Co., Ltd., Asia and Germany Chemical Equipment (Shanghai) Co., Ltd., Huachang Polymers Co., Ltd. of East China University of Science and Technology, Zhangjiagang City of Italy FRP Manufacturing Co., Ltd.. The main drafters of this standard.Li Zhongjiang, Li Guoshu, Yang Yuqing, Sang Linchun, Hang Suping, Wu Yongtai, Tong Xinyang, Yang Meng, Xu Zhijun, Mao Ye, Zhang Zhi, Luo Xiaoming, Xiong Tao, Yang Jichun, Zhang Fubin, Cao Xingzhen, Xu Li, Huang Haoxin, Zhao Zhinong, Wang Bo, Zhang Nan. Fiber-reinforced plastic pressure vessels - General requirements

1 Scope

This standard specifies the terms and definitions of fiber-reinforced plastic pressure vessels, classification and marking, materials, design, manufacture, quality requirements and inspection Inspection, marking, packaging, transportation and storage, factory information and so on. This standard applies to the inner diameter of less than or equal to 4800mm, design pressure 0.1MPa ~ 1.6MPa, design temperature of -54 ℃ ~ 120 ℃, the design pressure and the inner diameter of the product is less than or equal to 2.40MPa · m fixed fiber reinforced plastic pressure vessel (hereinafter referred to as pressure Force container). This standard does not apply to the following pressure vessels. a) Mobile pressure vessels, gas cylinders, oxygen tanks; b) The normal operation of the working pressure is less than 0.1MPa containers (including the feed or discharge process needs instantaneous pressure greater than Or a container equal to 0.1 MPa); c) Pressure vessels containing extremely toxic or highly toxic media or liquefied gases.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. Pressure vessels Part 1 GB/T 150.1 General requirements Pressure vessels - Part 4. Manufacture, inspection and acceptance GB/T 1446 fiber-reinforced plastics performance test methods General Test method for tensile properties of GB/T 1447 fiber reinforced plastics Standard Test Method for Compressive Properties of GB/T 1448 Fiber Reinforced Plastics Test method for bending properties of GB/T 1449 fiber reinforced plastics GB/T 1450.1 Fiber reinforced plastics - Determination of interlaminar shear strength GB/T 1634.2-2004 Determination of plastic deformation temperature of the load - Part 2. Plastic, hard rubber and long fiber reinforced composite material GB/T 2577 glass fiber reinforced plastic resin content test methods GB/T 3854 reinforced plastic Barcol hardness test method Test method for chemical resistant properties of glass fiber reinforced thermosetting plastics GB/T GB/T 3961 fiber-reinforced plastic terminology Liquid unsaturated polyester resin for GB/T 8237 fiber reinforced plastics GB/T 13657 bisphenol A epoxy resin GB/T 17470 fiberglass chopped strand mat and continuous strand mat GB/T 18369 glass fiber rovings GB/T 18370 glass fiber roving cloth GB/T 22789.1 rigid PVC sheet classification, size and performance - Part 1. Thickness of 1mm above the plate GB 50009 Building structural load specifications HG/T 4090 plastic lining equipment EDM test methods ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34329-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34329-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34329-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34329-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.