Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 3403.2-2013 English PDF

Q: How long will the true-PDF of English version of GB/T 3403.2-2013 be delivered?

Upon your order, we will start to translate GB/T 3403.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 3403.2-2013_English with my colleagues?

Yes. The purchased PDF of GB/T 3403.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3403.2-2013: Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3403.2-2013	329	Add to Cart	3 days	Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties	Valid

Similar standards

GB/T 5761 GB/T 4615 GB/T 1843 GB/T 1630.2 GB/T 3403.3 GB/T 3402.2

Basic data

Standard ID: GB/T 3403.2-2013 (GB/T3403.2-2013)
Description (Translated English): Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G32
Classification of International Standard: 83.080.20
Word Count Estimation: 14,127
Older Standard (superseded by this standard): GB 13454-1992
Quoted Standard: GB/T 1033.1-2008; GB/T 1034-2008; GB/T 1040.1-2006; GB/T 1040.2-2006; GB/T 1043.1-2008; GB/T 1408.1-2006; GB/T 1409-2006; GB/T 1410-2006; GB/T 1634.2-2004; GB/T 1636-2008; GB/T 2035; GB/T 2406.2-2009; GB/T 2407-2008; GB/T 2408-2008; GB/T 2918; GB/T 3398.1
Adopted Standard: ISO 14527-2-1999, MOD
Regulation (derived from): National Standards Bulletin No. 22 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the powdered urea - Test methods for formaldehyde and urea/melamine formaldehyde molding compound (UF- and UF/MF-PMCs) Preparation of sample and assay performance, and provides the processing requirements and test materials testing

GB/T 3403.2-2013: Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) Part 2. Preparation of test specimens and determination of properties ICS 83.080.20 G32 National Standards of People's Republic of China Replacing GB 13454-1992 Plastic powdered urea - formaldehyde and urea / Melamine - formaldehyde molding compound (UF- and UF/MF-PMCs) Part 2. Sample preparation and determination of properties mouldingcompounds (UF-andUF/MF-PMCs) - Part 2. Preparationoftestspecimensanddeterminationofproperties (ISO 14527-2.1999, MOD) Issued on. 2014-05-01 2013-11-12 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 3403 "Plastic powdered urea - formaldehyde and urea/melamine - formaldehyde molding compounds (UF- and UF/MF-PMCs)" includes the following 3 section. --- Part 1. Designation system and basis; --- Part 2. Sample preparation and performance measurement; --- Part 3. Selected plastic molding requirements. This section GB/T 3403 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This section and GB/T 3403 "Plastic powdered urea - formaldehyde and urea/melamine - formaldehyde molding compounds (UF- and UF/MF-PMCs)" of Part 3, GB/T 13454 "plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)" Part 3 be replaced GB 13454-1992 "amino molding plastic." This part of technological change and the corresponding portion of the GB 13454-1992 See Appendix A. This part redrafted Law Amendment uses ISO 14527-2.1999 "Plastics powdered urea - formaldehyde and urea/melamine - formaldehyde molding Material (UF- and UF/MF-PMCs) - Part 2. Preparation and determination of properties "sample. This part of ISO 14527-2.1999 as compared to the presence of changes in technology, changes in the terms of those involved has been through in its outer margin bits Opposed to a single vertical line (|) have been marked, in Appendix B gives the contents of the corresponding technological change and its causes. --- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● Modify with international standards of GB/T 1409-2006 instead of IEC 60250. 1969; ● Modify with international standards of GB/T 1636-2008 instead of ISO 60. 1977; ● Modify with international standards of GB/T 3403.3-2013 instead of ISO 14527-3.1999; ● Modify with international standards of GB/T 19467.1-2004 instead of ISO 10350-1.1998; ● use equivalent to international standards of GB/T 5474-1985 instead of ISO 120. 1977; ● with a degree of consistency with international standards is not equivalent GB/T 13455-1992 instead of ISO 3671. 1976; ● Normative references Delete the ISO 2112.1990, ISO 4614. 1977, ISO 15062; ● Normative references increased by GB/T 5009.61-2003, GB/T 2407-2008 (ISO 181. 1981, IDT), GB/T 2408-2008 (IEC 60695-11-10.1999, IDT), GB/T 17037.4-2003 (ISO 294-4.2001, IDT). This section also made the following editorial changes. --- With "ρv" instead of "ρe", "ρs" instead of "σe"; --- Deleted the Chapter 2, "Normative references" in footnote 4; --- Delete a footnote in Table 1; --- Increased in Appendices A and B. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Technical Committee of Standardization Technical Committee plastic thermosetting plastics (SAC/TC15/SC11) centralized. This section is drafted. Fujian Shaxian Hongguang Chemical Co., Ltd., Changshu Southeast Plastic Co., Chenguang Chemical Research & Design Institute Limited, Guangdongrongtai Industrial Co., Ltd., Shandong Billiton Bo Plastics Co., Ltd., the State Quality Supervision, Inspection synthetic resin center. The main drafters of this section. Chenyin Gui, Chen Jiwei, Ning Zheng, Wei Wei, Chen Dongyang, Peng Jianjun. This standard replaces the standards previously issued as follows. --- GB 13454-1992. Plastic powdered urea - formaldehyde and urea / Melamine - formaldehyde molding compound (UF- and UF/MF-PMCs) Part 2. Sample preparation and determination of properties

1 Scope

GB/T 3403 provisions of this part of the powdered urea - formaldehyde and urea/melamine formaldehyde molding compounds (UF- and UF/MF-PMCs) Sample Standard Test Method for preparation and assay performance and processing requirements specified test material and the test material before molding and the specimens before testing State regulation requirements. This section applies to powdered urea - formaldehyde and urea/melamine formaldehyde molding compounds (UF- and UF/MF-PMCs) step sample preparation, conditions And a method of measuring the material properties of these samples. But also for the performance of its test methods needed to characterize PMCs. The performance of projects selected GB /19467.1-2004 General test method in T. Widespread use of PMCs or other special weight To test contained in this section, according to GB/T 3403.1-2008 performance characteristics specified in 4.4.3 and 4.4.4. In order to obtain reproducible and comparable test results there, sample preparation method should be used in this Part, sample conditioning methods, Sample size and test procedure. The sample size was measured using different samples prepared by different methods or values \u200b\u200bobtained are not necessarily identical.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. 1033.1-2008 non-plastic foam density measurement GB/T Part 1. Immersion method, liquid pyknometer method and titration method Determination of GB/T 1034-2008 plastic water absorption 1040.1-2006 Plastics Determination of tensile properties GB/T Part 1. General GB /1040.2-2006 Plastics Determination of tensile properties T Part 2. Test plastics molding and extrusion conditions Determination of GB/T 1043.1-2008 Plastics Charpy impact properties - Part 1. Non-instrumented impact test GB/T 1408.1-2006 electrical insulating materials strength test methods - Part 1. Tests at power frequencies GB/T 1409-2006 Measurement of electrical insulating materials at power, audio, high-frequency (including meter wavelengths included) of the permittivity and dielectric loss The recommended method consumption factor GB/T 1410-2006 solid insulating material volume resistivity and surface resistivity test method Determination of GB/T 1634.2-2004 Plastics deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite material Determination of GB/T 1636-2008 plastic funnel outflow from the provisions of the apparent density of the material GB/T 2035 plastic terms and definitions GB/T 2406.2-2009 Plastics - Determination of burning behavior by oxygen index Part 2 Method. room temperature test Determination of GB/T 2407-2008 plastic rigid plastic small sample and when hot rod contacting combustion characteristics GB/T 2408-2008 Plastics - Determination of burning behavior of horizontal and vertical ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3403.2-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3403.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3403.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3403.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.