GB/T 33437-2016 PDF EnglishUS$160.00 · In stock · Download in 9 seconds
GB/T 33437-2016: Test method of static vibration for all terrain vehicles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33437-2016: Test method of static vibration for all terrain vehicles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33437-2016GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.140 T 04 Test method of static vibration for all terrain vehicles Issued on: DECEMBER 30, 2016 Implemented on: JULY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Test conditions ... 5 5 Test method ... 5 6 Test parameters and data processing ... 9 7 Test record ... 10 Annex A (informative) Application guide for frequency weighting factor, axial weighting factor ... 11 Annex B (informative) Static vibration test record ... 12 Test method of static vibration for all terrain vehicles1 ScopeThis Standard specifies terms and definitions as well as test methods related to static vibration for all terrain vehicles. This Standard is applicable to all terrain vehicles.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 3241, Octave-band and fractional-octave-band filters GB/T 13441.1-2007, Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1. General requirements (ISO 2631- 1.1997, IDT) GB/T 13824, Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity GB/T 14412, Mechanical vibration and shock - Mechanical mounting of accelerometers GB/T 14790.1-2009, Vibration - Measurement and evaluation of human exposure to hand - Transmitted vibration - Part 1. General requirements (ISO 5349-1.2001; IDT) GB/T 23716-2009, Human response to vibration - Measuring instrumentation (ISO 8041.2005, IDT) GB/T 24936-2010, Terms for all terrain vehicles3 Terms and definitionsFor the purposes of this document, the terms and definitions defined in 3.1 of GB/T 24936-2010 as well as the followings apply. 3.1 static vibration mechanical vibration generated by the engine (motor) when the all-terrain vehicle is in neutral or equivalent non-driving (such as driving wheels off the ground) 3.2 hand-transmitted vibration mechanical vibration that acts directly through the hand or is transmitted to the arm 3.3 whole-body vibration mechanical vibration transmitted to the whole body through the support surface of the human body4 Test conditions4.1 Driver requirements 4.1.1 The driver's height is 1.75m ±0.05m. 4.1.2 The total mass of the driver and his equipment is 75kg ± 5kg. 4.2 Placement and status of test vehicle 4.2.1 The test vehicle is the whole kerb vehicle mass. If the accessory that has a large influence on the vibration of the vehicle is optional, it shall be tested with the accessory that can produce the strongest vibration of the vehicle. 4.2.2 The test vehicle transmission is in neutral; the clutch is engaged. If there is no neutral, the drive wheel can be emptied so that the drive wheel can run without load. 4.2.3 The test vehicle shall not load occupants and cargo.5 Test method5.1 General 5.1.1 The static vibration of a four-wheeled all-terrain vehicle shall be tested in the direction of the handle, seat cushion, pedal and other parts. The direction and the left and right sides of the pedal are tested, and the larger value is taken as the total effective acceleration value. 5.1.2 Static vibration of multi-purpose all-terrain vehicles or recreational vehicles shall be tested for pedals, seat cushions, seat-backrests, etc. each part. 5.3.4 Repeat step 5.3.3 by the other two drivers, and 3 different drivers measure a total of 3 sets of data. 5.3.5 The test speed (such as resonance speed) or the test position (such as the occupant position) can be appropriately increased as needed.6 Test parameters and data processing6.1 Test parameters 6.1.1 Frequency weighted acceleration test requires frequency weighting and band limiting filter. For hand-transmitted vibration, refer to the requirements of Annex A of GB/T 14790.1-2009. Record vibration signals in the 1/3 octave frequency range of the center frequency from 6.3Hz~1250Hz. For foot vibration, seat cushion vibration and seat-back vibration, refer to the requirements of Annex B of GB/T 23716-2009. Record vibration signals in the 1/3 octave frequency range of the center frequency from 6.3Hz~400Hz. When the vibration signal is analyzed by 1/3 octave spectrum, the filtering characteristics shall meet the requirements of GB/T 3241, and the vibration sensor and connecting cable shall meet the requirements of GB/T 13824. 6.1.2 Frequency weighted acceleration RMS test on x, y, z directions shall use linear integration method. The integration time of each valid value is between 2s~5s. 6.2 Data processing Among the three sets of data measured, each group of data excludes the highest and lowest values of 7 consecutive tests. The remaining 15 values are averaged and calculated according to equation (1). where, awo - Total weight acceleration effective value, in meters per square second (m/s2); - Average value of the effective value of the weighted acceleration of each axis corresponding to the frequency, in meters per square second (m/s2); k(x,y,z) - Axis corresponding weighting coefficient, see Annex A. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33437-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33437-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33437-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33437-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33437-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33437-2016?A step-by-step guide to download PDF of GB/T 33437-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33437-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
