GB/T 33436-2016 PDF EnglishUS$160.00 · In stock · Download in 9 seconds
GB/T 33436-2016: Test method of reliability and durability for four wheeled all-terrain vehicles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33436-2016: Test method of reliability and durability for four wheeled all-terrain vehicles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33436-2016GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 T 04 Test method of reliability and durability for four wheeled all-terrain vehicles Issued on: DECEMBER 30, 2016 Implemented on: JULY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Test conditions ... 4 4 Test methods ... 7 5 Test records ... 10 Annex A (informative) Main parameter record ... 11 Annex B (informative) Main performance test result record ... 12 Annex C (informative) Reliability, durability test failure record ... 13 Test method of reliability and durability for four wheeled all-terrain vehicles1 ScopeThis Standard specifies test conditions, test methods and test records for reliability and durability of four wheeled all-terrain vehicles. This Standard is applicable to the reliability and durability test of four wheeled all-terrain vehicles.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 5378, Methods of road test for motorcycles and mopeds GB 15742-2001, Performance requirements and test methods of horn for motor vehicles GB 24926, Performance and measurement method for braking of all-terrain vehicles GB 24929, Limit and measurement method of noise emitted by accelerating all-terrain vehicles GB/T 24935, The test method of maximum stable side-inclination for all- terrain vehicles GB/T 24936, Terms for all terrain vehicles GB/T 32229, Road test methods for all-terrain vehicles QC/T 903, Fault-types for motorcycles and mopeds3 Test conditions3.1 Test preparation specified in the on-board technical documents. The load mass of other types of all-terrain vehicles is a driver weighing 75kg. Performance test loading mass is carried out in accordance with relevant standards. 3.2.4 It is not allowed to adjust the test vehicle during the performance test. 3.3 Suspension test condition If one of the following situations is found during the test, the test shall be suspended, or the test shall be continued after the special improvement. a) Steering and braking systems do not ensure safe driving; b) The test cannot be continued due to breakage, de-soldering, etc. of the frame or its welded joint; c) Serious damage to the assembly to be inspected during the test needs to be replaced; d) Electrical system failure causes hidden dangers that cannot be eliminated on site. 3.4 Test road requirements 3.4.1 Reliability and durability test roads shall generally include. a) Sand stone pavement. natural uncompacted flat pavement of which the base layer of the pavement is mainly composed of gravel and sand; the principle of gravel is no more than 30mm, and the content of gravel is 50%~60% of the composition of the base material; b) Bumpy road. the roadbed is solid, but the road surface is uneven, and there shall be obvious seesaw waves; the pavement flatness is E or below; when the test vehicle is driving on the road, it shall be subjected to strong vibration and twisting load, but it shall not have too much impact; c) Slope road surface. the average longitudinal slope of the pavement is not less than 10%, and the pavement flatness is above level C; d) Wading road. the road surface is flat, the average thickness of the water layer is not less than 30mm, and the sand content is not less than 30%; e) Flat road. in line with national first- and second-class road requirements, the road surface is wide and straight, and the view is good. 3.4.2 Reliability and durability test can be carried out on a specific closed road surface in the test site, or it can select to test the specific road surface that is small in traffic flow and is suitable for driving or testing safety. 4.4.2.2 The mileage of the walk-in during the test, the mileage of the inspection, the mileage of the performance test, etc. shall be included in the test mileage of the flat road. 4.4.3 Driving test requirements and specifications 4.4.3.1 The driving test shall be carried out according to the requirements of the relevant product technical documents or other devices, switches, etc., such as lights, speakers, glass windows (if any), doors (if any), etc. Appropriate adjustments can be made according to different vehicle types, models, test purposes, etc. during specific tests. 4.4.3.2 All kinds of pavements are cycled as proportionally as possible, for mixed driving. 4.4.3.3 In case of extreme weather effects, such as rain and snow, the relevant driving test shall be delayed. 4.4.3.4 Driving operation is as follows. a) Transmission use (if any). the transmission shall be used correctly during the whole test, and it shall not be slid in neutral. It shall stop at least 10min for every 50km, and continuously shift when starting; b) Speed. when ensuring safety, drive at the speed of the product technical documentation; c) Braking. in every 10km driving, at least brake to parking 2 times; d) Driving test mileage. 10% of night driving mileage shall be included. Allow to turn on the light during the day to replace night driving. 4.4.3.5 During the driving test, the test vehicle can be inspected, adjusted and maintained according to the maintenance manual or the relevant product technical documents. All kinds of faults and parts replacement shall be counted in the fault statistics. The fault statistics are implemented in accordance with the provisions of QC/T 903. 4.4.4 Reliability and durability evaluation calculation 4.4.4.1 After the reliability and durability test, evaluate the first fault mileage, average fault interval mileage, equivalent failure rate, and comprehensive assessment score of the prototype. 4.4.4.2 The calculation method for reliability and durability evaluation is performed in accordance with the provisions of QC/T 903. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33436-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33436-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33436-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33436-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33436-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33436-2016?A step-by-step guide to download PDF of GB/T 33436-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33436-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
