GB/T 33383-2024 English PDFUS$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33383-2024: Corrosion control technology of modified polyvinyl chloride structural adhesive and cement Status: Valid GB/T 33383: Historical versions
Basic dataStandard ID: GB/T 33383-2024 (GB/T33383-2024)Description (Translated English): Corrosion control technology of modified polyvinyl chloride structural adhesive and cement Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A29 Classification of International Standard: 25.220.99 Word Count Estimation: 18,173 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 33383-2016 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33383-2024: Corrosion control technology of modified polyvinyl chloride structural adhesive and cement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 25.220.99 CCSA29 National Standards of People's Republic of China Replace GB/T 33383-2016 Corrosion control technology of modified polyvinyl chloride structural adhesive and mortar Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 2 4.1 Design 2 4.2 Materials 9 4.3 Construction 10 4.4 Acceptance 11 5 Data Management12 Appendix A (Normative) Test method for base coating performance 13ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 33383-2016 "Technical Specification for Corrosion Resistance of Modified Polyvinyl Chloride (HFVC) Structural Adhesives and Mortars" and Compared with GB/T 33383-2016, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Added the terms "modified polyvinyl chloride (HFVC) anti-corrosion structural adhesive", "angstrom microcrystalline (AWHFVC) anti-corrosion structural adhesive", "waterproof "Anti-seepage anti-corrosion sol", "anti-corrosion composite coating" and definitions (see 3.1, 3.2, 3.9 and 3.11); the terms "primer coating" and "main layer" have been changed Definitions of “reinforcement layer”, “surface coating”, “coating repair material” and “anti-corrosion structural adhesive” (see 3.4, 3.5, 3.6, 3.7, 3.8 and 3.10, 3.2, 3.3, 3.4, 3.5, 3.6 and 3.8 of the.2016 edition); the term "waterproof anticorrosive sol" and its definition were deleted (see.2016 edition 3.7); b) Added the following design rules for the main coating, top coating and primer coating of HFVC (or AWHFVC) anti-corrosion composite coating. Performance requirements" (see 4.1.2), changed the requirements for painting at construction joints [see 4.1.6d)1), 4.1.4d)1) of the.2016 edition]; c) The test methods for “bond strength, volume resistivity, hardness (Shore A), and water impermeability” have been changed (see Table 1, Table.2016 Edition). 1); Added the requirement and test method of "HF resistance (immersion in 5% HF solution for 72h)" (see Table 1); Changed the “Penetration depth” requirements (see Table 2, Table 2 of the.2016 edition); d) Deleted the requirement of “concrete surface dryness and moisture content” [see 4.3.2.1.3c) of the.2016 edition]; added the requirement of “concrete base before coating” Surface treatment requirements [see 4.3.2.1.3c)~d)]; added the "moisture content" requirements for the base before anti-corrosion construction (see 4.3.2.1.4); e) Added the quality requirements for HFVC (or AWHFVC) anti-corrosion composite coatings [see 4.4.2c)], and deleted the HFVC anti-corrosion structure Coating quality requirements [see 4.4.2c) of the.2016 edition]; f) Added the requirements for base coating construction [see 4.4.3c)]; g) The test method for “Alkali resistance and acid resistance” has been changed (see A.7, A.7 of the.2016 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Technical Committee on Corrosion Control (SAC/TC381). This document was drafted by. Urumqi Tianlu Kaideli Chemical Co., Ltd., Zhejiang Aimi Microcrystalline New Material Technology Co., Ltd., Guangdong Jian Kexin Technology Research Institute Co., Ltd., China Communications Construction Funeng Construction Engineering Co., Ltd., Guangzhou Synthetic Materials Research Institute Co., Ltd., Jiangsu Bangjie Anti-corrosion and Insulation Technology Co., Ltd., Guangzhou Liangheng Testing Technology Service Co., Ltd., Guanghan Huaqi Anti-corrosion Engineering Co., Ltd., Jiangsu Jinling Special Coatings Co., Ltd., Huzhou Lvtian New Materials Co., Ltd., China Municipal Engineering North China Design and Research Institute Co., Ltd., Zhejiang Digital Intelligence and Transportation Institute Technology Co., Ltd., Hangzhou Benchuang Technology Co., Ltd., Hunan Anguang Inspection and Testing Co., Ltd., Henan Sihai Anticorrosion Group Co., Ltd., China International Corrosion Control Engineering Technology Research Institute (Beijing) Co., Ltd., Xuzhou Shengdu Construction Engineering Co., Ltd., China Energy Engineering Group Hu Henan Electric Power Design Institute Co., Ltd., Henan Puxin Anticorrosion Construction Engineering Co., Ltd., Shandong Electric Power Engineering Consulting Institute Co., Ltd., China Electric Power Engineering Consulting Group Northwest Electric Power Design Institute Co., Ltd., Xiangyang Zhongzhong Chemical Co., Ltd., and Zhongshan Vocational and Technical College. The main drafters of this document are. Xu Yunli, Xu Jizhuan, Chen Jun, Zhang Kai, Liu Qin, Liu Yan, Xie Yufang, Wang Xingxiu, Mo Yeqiang, Yuan Shuang, Wen Guosong, Bian Zhibing, Liao Xiaolong, Li Jing, Gao Yingliang, Liu Hongyi, Xu Xiaomei, Zhang Peng, Guo Minlong, Yu Chunhui, Huang Lu, Li Xianxiu, Chen Lihua, Liu Yanhua, Guo Qingying, Zhang Tao, Zheng Jun, Zhang Zhigang, Dai Tiehua, Liu Xuan, Luo Jianjun, Chen Shaoxiong, Zhao Xiangyue, Zhang Jibing, Zhao Bing, Ma Qinglei, Sun Xiaojing, Mengkai Ge, Jianji Chen, Wenqiang Niu, Xing Fan, Yi Huang, Bingyuan Hao, Shuguang Yao, Fuyang Yao, Xiao Yao, Wu Ma. This document was first published in.2016 and this is the first revision. Corrosion control technology of modified polyvinyl chloride structural adhesive and mortar1 ScopeThis document specifies the technical requirements and data management for corrosion control of modified polyvinyl chloride structural adhesives and mortars. This document applies to the waterproofing, anti-seepage and anti-corrosion of reinforced concrete (or concrete) surfaces in newly built, rebuilt and expanded buildings and structures. Design and construction work, and reference for anti-corrosion design and corrosion-resistant work on the surfaces of other equipment and steel structures.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 531.1 Test method for indentation hardness of vulcanized rubber or thermoplastic rubber Part 1.Shore hardness tester method (Shore hardness) GB/T 1725 Determination of non-volatile matter content of paints, varnishes and plastics GB/T 1728 Determination of drying time of paint and putty films GB/T 1732 Determination of impact resistance of paint films GB/T 2567 Test methods for properties of resin castings GB/T 3186 Sampling of paints, varnishes and raw materials for paints and varnishes GB/T 7124 Determination of tensile shear strength of adhesives (rigid material to rigid material) GB/T 9274 Determination of resistance of paints and varnishes to liquid media GB/T 13452.2-2008 Determination of film thickness of paints and varnishes GB/T 16777-2008 Test methods for building waterproof coatings GB/T 17671 Test method for strength of cement mortar (ISO method) GB/T 31838.2-2019 Dielectric and resistance properties of solid insulating materials Part 2.Resistance characteristics (DC method) Volume Electrical resistance and volume resistivity GB 50108-2008 Technical specification for waterproofing of underground projects GB 50209 Code for acceptance of construction quality of building ground engineering GB 50212 Code for construction of building anti-corrosion engineering GB 50224-2018 Construction quality acceptance standard for building anti-corrosion projects JC/T 474-2008 Mortar and concrete waterproofing agent3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 adhesive A material made by mixing modified polyvinyl chloride resin, corrosion-resistant pigment, filler components, polyvinyl chloride compounds and auxiliary components. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33383-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 33383-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33383-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33383-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 33383-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33383-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
