GB/T 33223-2024 English PDFUS$1719.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33223-2024: Rolling equipment - Vocabulary Status: Valid GB/T 33223: Historical versions
Basic dataStandard ID: GB/T 33223-2024 (GB/T33223-2024)Description (Translated English): Rolling equipment - Vocabulary Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H94 Classification of International Standard: 77.180 Word Count Estimation: 86,860 Date of Issue: 2024-12-31 Date of Implementation: 2024-12-31 Older Standard (superseded by this standard): GB/T 33223-2016 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 33223-2024: Rolling equipment - Vocabulary---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 77.180 CCSH94 National Standard of the People's Republic of China Replaces GB/T 33223-2016 Rolling Equipment Terminology Released on 2024-12-31 2024-12-31 implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Basic terms 1 4 Rolling mill stand, roller transmission device and main parts 7 5 Heating equipment 14 6 Blooming Mill 15 7 Strip rolling mill 16 8 Steckel mill 17 9 Profile rolling mill 17 10 Foil rolling mill19 11 Tube rolling equipment 20 12 Precision rolling mill 25 13 Finishing equipment 26 14 Surface treatment and heat treatment equipment 32 15 Guiding, conveying and packaging equipment 34 16 Rolled product deep processing equipment 44 17 Cooling and lubrication equipment 45 18 Detection, control and automation equipment 47 References 52 Index 53ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 33223-2016 "Rolling Equipment Terminology". Compared with GB/T 33223-2016, in addition to structural adjustments and In addition to the logical changes, the main technical changes are as follows. a) The scope statement has been changed (see Chapter 1, Chapter 1 of the.2016 edition). b) Deleted high-precision rolling, thin plate stacking, controlled rolling, controlled cooling, pipes, special-shaped pipes, metal products, dephosphorization, and hole design meter, electromagnetic induction heating device for tropical intermediate billet, hot rolling mill, cold rolling mill, blooming mill, thin slab mill, large rolling mill, medium rolling mill, Thin plate rolling mill, wide strip hot rolling mill, wide strip cold rolling mill, wide strip leveler, mushroom piercing machine, automatic tube rolling mill, full floating mandrel Continuous tube mill, semi-floating mandrel continuous tube mill, limited mandrel continuous tube mill, tension reducing mill, multi-row roller cold rolling mill, cold Tube pulling machine, single-stand reversing mill, three-roller mill, Cox mill, sixteen-roller Z-mill, mill rolling on flat plate, Universal joint, slider universal joint, cross shaft universal joint, plum blossom joint, combined joint, arc gear joint, intermediate shaft, universal joint Shaft balancing device, rolling bearing, shearing machine, sawing machine, flame cutting machine, grinding wheel cutting machine, straightening machine, upper roller individual adjustment roller straightening machine, upper roller integral parallel adjustment roller straightening machine, oblique adjustment roller straightening machine, "313" roller straightening machine, steel plate rolling mill Pusher, hot-rolled steel coil pallet transport line, cold-rolled steel coil pallet transport line, guide device, sizing machine, printer, high-wire diameter gauge, digital Word-controlled position automatic control system, stored program-controlled position automatic control system, programmable control position automatic control system The system has 61 terms and definitions (see 2.1.8, 2.1.11, 2.1.13, 2.1.14, 2.2.3, 2.2.4, 2.2.8, 2.7, 2.11, 3.6, 4.2, 4.3, 4.4.1, 4.4.3, 4.5.2, 4.5.3, 4.6.4, 4.6.6, 4.7.3, 4.7.6, 4.8.1.3, 4.8.2, 4.8.4.1~4.8.4.3, 4.8.7, 4.9.3, 4.10, 4.12, 5.1.2, 5.1.2.2, 5.1.7.4, 5.1.10, 5.2.9.1, 5.2.9.1.1, 5.2.9.1.2, 5.2.9.2~5.2.9.6, 6.2.3, 7.1, 7.7, 7.9, 7.10, 8.1, 8.3.3~8.3.5, 8.4.1, 9.7.3, 9.13, 9.14, 9.16, 9.19, 11.6, 15.1.4, 15.3.1~15.3.3). c) Added oblique rolling piercing, oblique rolling extension, oblique rolling expansion, continuous casting and rolling, semi-headless rolling, direct rolling, hot rolling, reversible hot rolling, Cold rolling, reversible cold rolling, composite rolling, thermomechanical rolling, asynchronous rolling, serpentine rolling, surface treatment, foil, seamless pipe, rough pipe, Barren pipe, cantilever mill, UCMW mill, backing roller, roll angle adjustment device, brush roller device, discharge machine, single stand reversible Cold rolling mill, double-stand reversible cold rolling mill, pickling continuous rolling mill, coiling furnace, furnace reel, H-beam rolling mill, H-beam two-roller rough rolling mill Machine, H-beam three-stand tandem finishing mill, H-beam universal roughing mill, H-beam universal finishing mill, H-beam edge rolling mill, H-beam Steel continuous rolling mill, rail beam three-frame tandem finishing mill, rail beam universal rough rolling mill, rail beam universal finishing mill, rail beam edge rolling mill, rail beam continuous rolling mill Mill, bar mill, bar continuous rolling mill, bar horizontal rolling mill, bar vertical rolling mill, trimming device, VC roller, barrel roller piercing machine, cone Roller piercing machine, tube rolling mill, two-roller cross-rolling mill, guide plate tube rolling mill, Discher tube rolling mill, Asser tube rolling mill, Transvaal Tube rolling mill, two-roller continuous tube rolling mill, three-roller continuous tube rolling mill, pipe jacking machine, sizing/reducing mill, oblique rolling and expanding mill, reeling mill, rotary sizing mill cold rolling mill, tube stripping mill, cycle cold rolling mill, planetary cold rolling mill, continuous cold rolling mill, double-line cold rolling mill, multi-line cold rolling mill Machine, guide plate, guide roller, guide plate, plug, mandrel, auxiliary equipment, heat centering machine, setting machine, wool tube anti-oxidation device, rod stripping machine, mandrel Lubrication device, barrel rolling mill, rolling cut-to-length shear, rolling cut double-sided shear, horizontal and vertical composite straightening machine, centering side guide, coil pallet transport Conveyor line, inkjet printer, step-type cooling bed, ultra-fast cooling device, process lubrication system, thin oil lubrication system, dry oil lubrication system, oil and gas lubrication Lubrication system, oil mist lubrication system, speed meter, temperature meter, multi-function instrument, hole meter, flatness meter, profile meter, vibration monitoring system, Data collection and analysis system has 102 terms and definitions (see 3.1.4.1~3.1.4.3, 3.1.6, 3.1.6.2, 3.1.7, 3.1.8.1, 3.1.8.2, 3.1.10.1, 3.1.10.2, 3.1.12, 3.1.13, 3.1.16, 3.1.17, 3.1.20, 3.3.2.3, 3.3.2.4, 3.3.2.4.1, 3.3.2.4.2, 4.1.2.6, 4.1.6.5, 4.3.1.4, 4.3.5.4, 4.3.8, 5.9, 7.2.3~7.2.5, 8.2, 8.3, 9.2, 9.2.1, 9.2.2, 9.2.2.1~9.2.2.3, 9.2.3, 9.3.1, 9.3.1.1~9.3.1.3, 9.3.2, 9.4, 9.4.1~9.4.3, 10.2, 10.4, 11.1.1.1.1, 11.1.2.4, 11.1.3~11.1.7, 11.2.1, 11.2.2~11.2.5, 11.3.1~11.3.5, 11.4, 11.4.1~11.4.5, 12.13, 13.1.4.6.1, 13.1.4.6.2, 13.3.2.3, 15.2.7.3, 15.2.13, 15.3.7, 17.1.2.9, 17.1.2.16, 17.2.4, 17.2.4.1~ 17.2.4.4, 18.1.5, 18.1.6, 18.1.8~18.1.11, 18.12, 18.13). d) Changed rolling, oblique rolling, thin strip rolling, cumulative rolling, free schedule rolling, surface cleaning, finishing, rolled product, strip, profile, rolling force, rolling speed, pass type, rolling mill, rolling mill stand, vertical roll mill, Lutter mill, HCW four-roll mill, PC four-roll mill, CVC Four-roller mill, HCMW six-roller mill, CVC six-roller mill, UC mill, dual motor drive, main reducer, gear base, main Drive coupling, drive shaft, support roller, hydrodynamic bearing, roller bearing seat, roller balancing device, soaking furnace, step-type high temperature heating furnace, hot strip rolling mill, extra thick plate rolling mill, medium and thick plate rolling mill, cold strip rolling mill, furnace coil rolling mill, profile rolling mill, rail beam rolling mill, wire rod rolling mill Roller, foil rolling mill, hot rolling mill, piercing mill, two-roller cross-rolling piercing mill, Discher piercing mill, three-roller cross-rolling piercing mill, Accu-Rol Tube rolling mill, three-roller cross-rolling mill, push-rolling piercing mill, continuous tube rolling mill, periodic hot tube rolling mill, cold tube rolling mill, two-roller cold tube rolling mill Mill, multi-roller cold rolling mill, ring rolling mill, edge shear, reciprocating flying saw, rotary flying saw, inclined roller straightening machine, high pressure water Descaling machine, online direct quenching device after hot rolling, coil transport equipment, billet chain elevator, rotary roller table, non-drive roller table, auxiliary Coiler, roll cooling device, rolled material cooling device, strip surface quality detector, flatness meter, tilt control system, hot rolling without tension 77 terms and definitions in total, including automatic tension control system, micro-tension control system for continuous steel rolling, tension-free control system for bar and wire rolling (See 3.1.1, 3.1.4, 3.1.5, 3.1.11, 3.1.14, 3.1.19, 3.1.21, 3.3.2, 3.3.2.2, 3.3.2.5, 3.4.1, 3.4.3, 3.4.4, 3.5.1, 4.1.1, 4.1.2.2, 4.1.3, 4.1.4.1~4.1.4.3, 4.1.6.2~4.1.6.4, 4.2.5, 4.2.8~4.2.11, 4.3.1.2, 4.3.2.2.1, 4.3.3, 4.3.6, 5.1, 5.5, 7.1, 7.1.1, 7.1.2, 7.2, 8.1, 9.1, 9.3, 9.5, 10.1, 11.1, 11.1.1, 11.1.1.1, 11.1.1.1.3, 11.1.1.2, 11.1.1.3, 11.1.2.1.3, 11.1.2.2, 11.1.2.3, 11.1.2.5, 11.2, 11.2.1.1, 11.2.1.2, 12.1, 13.1.7, 13.2.7.1, 13.2.7.2, 13.3.3, 14.1.4.1, 14.2.2.2, 15.2.2, 15.2.3, 15.2.5.12, 2.1, 2.1.7, 2.1.12, 2.1.15, 2.2, 2.2.2, 2.2.5, 2.5, 2.8, 2.10, 2.12, 2.14, 3.1, 3.5, 4.1~4.3, 4.5, 4.5.1, 4.6.2, 4.6.3, 4.6.8, 4.7, 4.7.4, 4.8, 4.8.1, 4.8.1.1, 4.8.1.2, 4.8.1.4, 4.8.1.5, 4.8.3, 4.8.4, 4.8.5, 4.8.6, 4.9, 4.9.1, 4.9.2, 4.11.1, 5.1, 5.1.1.2, 5.1.2.1, 5.1.3.1~5.1.3.3, 5.1.5.2~5.1.5.4, 5.2.3, 5.2.6~5.2.9, 6.1.2, 6.2.2.1, 6.3, 6.6, 7.5.3, 7.8.1, 7.8.2, 8.4, 9.2, 9.2.1, 9.3, 9.5.12, 9.5.18.4, 10.2.2, 11.4.1, 12.5.5, 14.1, 14.2, 15.1.5, 15.1.6, 15.6.1, 15.8.1~15.8.4). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Metallurgical Equipment Standardization (SAC/TC409). This document was drafted by. China Heavy Machinery Research Institute Co., Ltd., Erzhong (Deyang) Heavy Equipment Co., Ltd., First Heavy Industries Group Dalian Engineering Engineering Technology Co., Ltd., Taiyuan Tongze Intelligent Engineering Co., Ltd., Taiyuan Heavy Industry Co., Ltd., Shanghai Xizhong Heavy Machinery Complete Set Co., Ltd., Beijing University of Science and Technology, Jinan Heavy Industry Co., Ltd., Northeastern University, Taiyuan University of Technology, Yanshan University, Taiyuan University of Science and Technology, Northern Heavy Industries Group Co., Ltd., MCC SEDI Engineering Technology Co., Ltd. The main drafters of this document are. Wu Liang, Qiu Mingjun, Shao Jumin, Wang Xichun, Xu Hongyan, Wu Jianbing, Liu Huaqiang, Ma Buqiang, Wang Xia, Ren Yucheng, Zhang Kangwu, Zhang Chao, Sun Yabo, Fan Yulin, Liu Yunfei, Liu Lei, Wei Zhiyi, Lin Kai, Zhang Luman, Liu Yong, Xia Juan, Wang Shijie, Gao Lu, Li Yong, Xu Wenjin, Wang Pengfei, Jia Xiang, Li Lu, Ma Xiangzhi, Luan Shoucheng, Wang Tao, Sun Jianliang, Zhou Cunlong, Li Weiwei, Yang Yuwei, Chen Benlun, Wang Xin, Wu Ruipeng, Li Aichen, Cui Yang, Dong Weiming, Fu Huanyu, Zheng Yonghong, Luo Tao, Sheng Aijun, Deng Yongquan, Zhou Zhengguo, Gao Weijun, Li Guoping. This document was first published in.2016 and this is the first revision. Rolling Equipment Terminology1 ScopeThis document defines the terms and their definitions related to various equipment in the rolling field. This document is applicable to the construction of standard system and drafting of standards in the rolling field. Flow and teaching practice. Note. Rolling equipment includes mechanical, electrical, fluid and other equipment.2 Normative referencesThis document has no normative references.3 Basic terminology3.1 Rolling technology and process 3.1.1 Rolling Calendering The metal material undergoes continuous plastic deformation under the pressure of the rotating rollers (4.3.1) to change its cross-sectional shape, size and mechanical properties. Energy process methods. Note. In this document, steel and non-ferrous metals are collectively referred to as “metallic materials”. 3.1.2 longitudinal rollinglongitudinalrolling;axialrolling The rollers (4.3.1) are arranged parallel to each other and rotate in opposite directions. The workpiece (3.3.1) translates between the rollers in a direction parallel to the axis of the rollers. The plane formed is perpendicular to the rolling (3.1.1). 3.1.3 crossrolling; transverseroling; spreadrolling The axes of the rollers (4.3.1) and the workpiece (3.3.1) are parallel to each other, and the workpiece is rolled in relative rotation between the rollers rotating in the same direction. (3.1.1). 3.1.4 Screwrolling The rollers (4.3.1) are arranged to be inclined at a set rolling angle (3.1.1) and have the same direction of rotation, and the rolled piece (3.3.1) rotates and moves forward under the action of the rollers. Rolling (3.1.1). Note. Cross-rolling is generally hot rolling, and is mainly used to produce seamless steel pipes, steel balls and other rolled products. 3.1.4.1 Using the plug (11.3.4) as the internal deformation tool, the solid tube billet is rolled (3.1.1) into a hollow rough tube (3.3.2.4.1) by oblique rolling (3.1.4). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33223-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 33223-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33223-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33223-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 33223-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33223-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
