GB/T 32868-2025 English PDFUS$514.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32868-2025: Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis Status: Valid GB/T 32868: Historical versions
Basic dataStandard ID: GB/T 32868-2025 (GB/T32868-2025)Description (Translated English): Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N04 Classification of International Standard: 19.020 Word Count Estimation: 26,290 Date of Issue: 2025-08-29 Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 32868-2016 Issuing agency(ies): State Administration for Market Regulation; Standardization Administration of China GB/T 32868-2025: Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT32868-2025 ICS 19.020 CCSN04 National Standards of the People's Republic of China Replaces GB/T 32868-2016 Thermogravimetric characterization method of carbon nanotubes in nanotechnology (ISO /T S11308.2020, IDT) Published on 2025-08-29 Implemented on 2026-03-01 State Administration for Market Regulation The State Administration for Standardization issued a statement. Table of ContentsPreface III Introduction IV 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4.Abbreviations and Symbols 2 5.TGA Principles 2 6.Sample Preparation 3 7.Test Methods 4 8.Data Analysis and Results 4 9 Uncertainty 6 10 Test Reports 7 Appendix A (Informative) Example of a Study 8 Appendix B (Informative) Influence of Thermogravimetric Analysis Operating Parameters 14 Reference 17ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document replaces GB/T 32868-2016 "Thermogravimetric Characterization Method of Single-Wall Carbon Nanotubes in Nanotechnology", and is consistent with GB/T 32868- Compared to.2016, aside from structural adjustments and editorial changes, the main technical changes are as follows. ---The scope has been changed (see Chapter 1, Chapter 1 of the.2016 edition); ---Terms and definitions such as "thermal stability," "uniformity," and "purity" have been changed (see 3.2, 3.3, and 3.6,.2016 editions of 3.2, 3.3, and 3.6). 3.6); ---DTA, TGC, and TOX have been removed (see Chapter 4 of the.2016 edition); ---Added abbreviations and symbols such as CNT, MWCNT, and SWCNT (see Chapter 4); ---The content regarding "Exothermic and Endothermic Reactions" has been revised (see 5.2,.2016 version 5.2); ---Added some crucible options for TGA testing of carbon nanotubes (see Table 1); ---The guidelines for sample quantity in sample preparation have been changed [see 6.2a) and 7b), 6.2a) and 7b) in the.2016 edition. This document is equivalent to ISO /T S11308.2020 "Nanotechnology - Thermogravimetric characterization method for carbon nanotubes", and the document type is changed from ISO. The technical specifications have been adjusted to become my country's national standards. Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the Chinese Academy of Sciences. This document is under the jurisdiction of the National Technical Committee on Standardization of Nanotechnology (SAC/TC279). This document was drafted by. National Center for Nanoscience and Technology, Hitachi Scientific Instruments (Beijing) Co., Ltd., and Beijing Institute of Metrology and Testing. China Association of Automobile Manufacturers and China National Accreditation Service for Conformity Assessment. The main drafters of this document are. Pu Lingyu, Chang Huaiqiu, Fang Yucheng, Zhao Xiaoning, Cao Qing, Gao Xuedong, Li Yao, Fu Huadong, Wang Ning, and Li Jie.introductionCarbon nanotubes (CNTs) are cylindrical nanostructures and are allotropes of carbon. Due to several... Due to the unique structure of CNTs, they exhibit distinctive mechanical, thermal, and electronic properties. CNTs can be synthesized through various methods, including pulsed excitation. Photoevaporation, arc discharge, high-pressure carbon monoxide dismutation, and chemical vapor deposition (CVD) are methods used to synthesize CNTs and heterogeneous materials. Mixtures of these substances often require subsequent purification. Commonly observed impurities include other forms of carbon, such as fullerenes, amorphous carbon, and fossil fuels. Black carbon, single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes outside the ideal size and chiral range And/or thermal oxidation is carried out. Reaction kinetic parameters related to pyrolysis, oxidation, pyrolysis, corrosion, moisture absorption/desorption, and gas escape. The reaction kinetic parameters of the samples are evaluated. Numbers can be used to qualitatively or quantitatively measure the relative proportions of different components. TGA is one of many analytical techniques that can be used to assess impurity levels in CNT-containing samples. For CNT-containing samples, TGA... TGA is typically used to quantify the content of non-volatile impurities (such as metal catalyst particles). TGA can also be used to evaluate the thermal stability of a given sample. The TGA instrument provides information about the types of carbon present in the material. Recent advances in TGA instruments have improved the resolution of the analysis process. However, the TGA itself... The information obtained from TGA alone is insufficient to determine the relative composition of carbonaceous products in a material. Therefore, information obtained from TGA is generally used to supplement other analytical techniques. The information collected is used to achieve a comprehensive assessment of the components of a CNT sample. Thermogravimetric characterization method of carbon nanotubes in nanotechnology 1.Scope This document describes a method for characterizing carbon nanotube (CNT) samples by thermogravimetric analysis (TGA) under inert or oxidizing conditions. This document is applicable to the measurement and quantitative evaluation of carbon species types and non-carbon impurities (such as metal catalyst particles) in materials. The purity of CNT samples was qualitatively assessed, as well as the thermal stability and homogeneity of CNT-containing samples. This document is not applicable to confirming CNT type and gold content. It is an impurity component.2 Normative referencesThe contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. ISO /T S80004-3 Nanotechnology Terminology Part 3.Carbon Nanomaterials (Nanotechnologies-Vocabulary-) Part 3.Carbonnano-objects Note. GB/T 30544.3-2015 Nanotechnology Terminology Part 3.Carbon Nanomaterials (ISO /T S80004-3.2010, IDT) 3.Terms and Definitions The terms and definitions defined in ISO /T S80004-3, as well as the following terms and definitions, apply to this document. The URLs for the terminology databases maintained by ISO and IEC for standardization are as follows. 3.1 TOX' The temperature at which the strongest peak appears on the differential thermogravimetric curve. 3.2 thermal stability Dimensional stability of solid materials when heated under specified conditions. 3.3 homogeneity The degree to which a property or a component (3.4) is uniformly distributed in a certain amount of substance. Example. Main oxidation temperature. 3.4 component constant The different components contained in carbon nanotubes. Note. Carbon nanotube samples often contain different forms of carbon and non-carbon materials, which can be identified by the oxidation peak and residual amount in the TGA curve. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32868-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 32868-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32868-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32868-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 32868-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 32868-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
