GB/T 32817-2016 English PDF

US$379.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32817-2016: Semiconductor devices -- Micro-electromechanical devices -- Generic specification for MEMS
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32817-2016	379	Add to Cart	3 days	Semiconductor devices -- Micro-electromechanical devices -- Generic specification for MEMS	Valid

Similar standards

GB/T 43770   GB/T 43978   SAMR 76   GB/T 32815   GB/T 32814   

Basic data

Standard ID: GB/T 32817-2016 (GB/T32817-2016)
Description (Translated English): Semiconductor devices -- Micro-electromechanical devices -- Generic specification for MEMS
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L55
Classification of International Standard: 31.080.99
Word Count Estimation: 19,197
Date of Issue: 2016-08-29
Date of Implementation: 2017-03-01
Regulation (derived from): National Standard Announcement 2016 No.14
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32817-2016: Semiconductor devices -- Micro-electromechanical devices -- Generic specification for MEMS

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Semiconductor devices - Micro-electromechanical devices - Generic specification for MEMS ICS 31.080.99 L55 National Standards of People's Republic of China General specification for microelectromechanical devices for semiconductor devices Genericspecification forMEMS (IEC 62047-4..2008, Semiconductordevices-Micro-electromechanicaldevices- Part 4. Genericspecification forMEMS, MOD) 2016-08-29 released 2017-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 standard environment 1 5 logo 2 5.1 Device identification 2 5.2 Device traceability 2 5.3 Packaging 2 6 quality assessment procedures 2 6.1 General 2 6.2 quality and/or performance qualification 2 6.3 Identification of approval procedures 3 7 Test and test procedures 6 7.1 Standard conditions and general precautions 6 7.2 Physical examination 7 7.3 Climate and mechanical tests 7 7.4 Alternative Test Method 7 Appendix A (Normative Appendix) Sampling Procedures 8 Appendix B (informative) Classification of MEMS technology and devices 9 Appendix C (informative) Standard conformance in normative references 13 References 16

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the re-drafting method to modify the use of international standards IEC 62047-4..2008 "Semiconductor Devices Microelectromechanical Devices Part 4 Points. MEMS general specification ". Compared with IEC 62047-4..2008, the main technical changes are as follows. - Removal of IEC 62047-4..2008 "Microelectromechanical devices for semiconductor devices Part 4. General specification for MEMS" Chapter 1 " 1MEMS classification and terminology ", the classification and the current national standard GB/T 26111" micro-electromechanical system (MEMS) technology The term "is not completely uniform; --- Change the name and corresponding section of IEC QC001002-3..2005 to IEC Q03-3..2013. IEC QC001002-3. 2005 has been discontinued and replaced by IEC Q03-3..2013; - "Submitted to NSI as required" in 6.3.1 to "Request to the relevant authorities as required" because NSI is an American institution; --- delete the B.3.1 in the AS, this abbreviation easily lead to ambiguity; - Adaptation of IEC 62047-1, "Semiconductor Devices Microelectromechanical Devices Part 1. Terminology and Definitions", in the normative reference document GB/T 26111 "Microelectromechanical System (MEMS) technical terminology" to ensure that this standard with the existing national standards in harmony; On the normative reference documents, this standard has made a technical differences in the adjustment to meet China's technical conditions, adjust the situation set Is reflected in Chapter 2, "normative reference documents", the specific adjustments are as follows. • Replace the IEC 60068-2 (all parts) with GB/T 2423, see Appendix C for the degree of consistency between the standard parts; • Replace the IEC 60068-2 (all parts) with GB/T 2424, see Appendix C for the degree of consistency between the standard parts; ● GB/T 4937 (all parts) In place of IEC 60749 (all parts), see Appendix C for the degree of consistency between the various parts of the standard. For ease of use, this standard has been modified as follows. --- Added 6.1, Chapter 6 other terms postponed; --- to the international standard A.1.1 to A.2, the suspension section to extract the title as A.2.1, other chapter number extension; --- B.3.1 and B.3.2 swap position; - Change the standard name to "General specification for microelectromechanical devices for semiconductor devices". This standard by the National Microelectromechanical Technology Standardization Technical Committee (SAC/TC336) proposed and centralized. The main drafting unit of this standard. China Machine Productivity Promotion Center, China Electronics Technology Group Corporation Thirteenth Research Institute, North University, Nanjing Polytechnic University, Dalian University of Technology. The main drafters of this standard. Li Haibin, Cui Bo, Liu Wei, Shi Yunbo, Qiu Anping, Shi Qin, Yang Yongjun, Liu Chong General specification for microelectromechanical devices for semiconductor devices

1 Scope

This standard describes the general specification for microelectromechanical systems (MEMS) manufactured by semiconductors, which specifies the quality of the IEC Q-CECC system The general rules of assessment give the general description of the electrical, optical, mechanical and environmental characteristics of the description and testing. This standard applies to all types of MEMS devices [such as sensors, RF MEMS, but does not include optical MEMS, bio-MEMS, micro- (Micro-TAS) and micro-energy MEMS.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 2423 Environmental testing for electric and electronic products - Part 2 [IEC 60068-2 (all parts)] GB/T 2424 Environmental tests [IEC 60068-2 (all parts)] GB/T 2828.1 Sampling inspection procedures Part 1. Batch inspection sampling plan for retrieval by quality limit (AQL) (GB/T 2828.1-2012, ISO 2859-1, IDT) GB 3100 International System of Units and Applications (GB 3100-1993, eqvISO 1000) GB/T 4728 (all parts) Electrical diagrams Graphical symbols (IEC 60617, IDT) GB/T 4937 (all parts) Semiconductor devices Mechanical and climatic test methods [IEC 60749 (all parts)] GB/T 26111 terminology for microelectromechanical systems (MEMS) IEC 60027 (all parts) Electronic technology characters (Lettersymbolstobeusedinelectricaltechnology) IEC 60747-1..2006 Semiconductor devices Part 1. General (Semiconductordevices-Part 1. General) IEC 61193-2 Quality assessment system - Part 2. Selection of sampling schemes for electronic components and packaging inspection assessmentsystems-Part 2. Selection and use ofsampling plansforinspection ofelectronic componentsandpackages IEC Q03-3..2013 IEC Electronic Components Quality Assessment System (IEC Q System) Rules of Procedure Part 3. Approval procedures, Related Materials and Components Planning [IEC QualityAssessmentSystemforElectronicComponents (IEC QSystem) - RulesofProcedure-Part 3. IEC QApprovedComponentProducts, RelatedMaterials Scheme]

3 terms and definitions

The terms, units, figures and symbols defined in GB/T 26111, GB 3100 and IEC 60027 apply to this document. Other specific terms, units and symbols referred to in this document shall be consistent with the relevant documents referred to in Chapter 2 or, in accordance with the above In the form of the provisions of the derived.

4 standard environment

The standard environment of parameter test, test and working condition is. temperature 25 ℃ ± 3 ℃, relative humidity 25% ~ 85%, pressure 86kPa ~ ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32817-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32817-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32817-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32817-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.