GB/T 32675-2016 English PDFUS$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32675-2016: Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions Status: Valid
Basic dataStandard ID: GB/T 32675-2016 (GB/T32675-2016)Description (Translated English): Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G31 Classification of International Standard: 83.080.10 Word Count Estimation: 6,645 Date of Issue: 2016-06-14 Date of Implementation: 2017-01-01 Adopted Standard: ISO 9771-1995, MOD Regulation (derived from): National Standard Announcement No. 8 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies a method for the determination of the exothermic reactivity of liquid thermosetting phenolic resins after mixing with acidic curing agents under specified conditions. The results are used to evaluate the processability of phenolic resins. GB/T 32675-2016: Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions ICS 83.080.10 G31 National Standards of People's Republic of China Plastic phenolic resin liquid resole phenolic resin Determination of adiabatic temperature rise during curing under acidic conditions (ISO 9771..1995, MOD) 2016-06-14 release 2017-01-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the re-drafting method to modify the use of ISO 9771..1995 "plastic phenolic resin liquid resole phenolic resin in acid Determination of the adiabatic temperature rise during curing. "(English version). There are technical differences between this standard and ISO 9771..1995, and the terms involved in these differences have passed through the margin The vertical single line (︱) of the position is marked. The technical differences between this and ISO 9771..1995 and the reasons are as follows. --- Reaction container (4.1) The size of the paper cup is changed from "bottom diameter. about 60mm, cup diameter. about 70mm, height. about 60mm" to "Bottom diameter. about 50 mm, cup diameter. about 70 mm, height. about 80 mm". The reason for the modification is given in ISO 9771..1995 Out of the paper cup specifications in China is not common; - Reproduced the schematic of the instrument in accordance with national standards (Figure 1). Because this standard has modified the scale of the paper cup as a reaction vessel Inch, so the figure in the foam block height from 120mm to 140mm; in order to be consistent with the description in 4.2, the figure reaction The mixture on the surface with the foam on the block from 20mm to 30mm; --- Change the results of the parallel test results to the maximum temperature and the time required to reach the maximum temperature in the results representation (Chapter 6) Not more than 3% and 5%. Refer to the repeatability given in the precision, ISO 9771..1995 in the general provisions of the parallel test results Not more than 5% unreasonable. For ease of application, this standard has also been modified as follows. --- Deleted the preface of ISO 9771..1995; - an introduction to the national standard; --- Change the precision of ISO 9771..1995 (Chapter 7) to Note. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard by the National Plastics Standardization Technical Committee Thermosetting Plastics Subcommittee (SAC/TC15/SC11) centralized. This standard is responsible for drafting units. Changshu Southeast Plastic Co., Ltd. This standard participates in the drafting unit. Zhongguang dawn Chemical Research and Design Institute Co., Ltd., Shaxian Hongsheng Plastic Co., Ltd., Shanghai Eurasia Materials Co., Ltd., Shandong Shengquan Chemical Co., Ltd., National Synthetic Resin Quality Supervision and Inspection Center. The main drafters of this standard. Wei Wei, Wang Weijiang, Zhao Ping, Luo Jianfeng, Zhu Yongmao, Wei Ying, Liu Lirong. Plastic phenolic resin liquid resole phenolic resin Determination of adiabatic temperature rise during curing under acidic conditions1 ScopeThis standard specifies the liquid thermosetting phenolic resin and acid curing agent mixed under the conditions of the exothermic reaction activity of the determination method. The results were used to evaluate the processing properties of phenolic resins.2 principleThe phenolic resin is mixed with an acid curing agent to cure, to determine the maximum temperature reached and the time required to reach the highest temperature.3 reagent3.1 Suitable acid curing agent And the composition of the resin, such as. p-phenolsulfonic acid, industrial grade, 65% ± 1% (mass fraction) aqueous solution. 4 instrument (see Figure 1) The unit is in millimeters Description. A --- thermocouple connected to the temperature recorder; D --- test tube; G --- ethylene glycol or other suitable liquid. B --- cover; E --- reaction mixture (resin); C --- reaction container; F --- foam block; Figure 1 Schematic diagram of the instrument ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32675-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32675-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32675-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32675-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
