GB/T 32358-2015 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32358-2015: Railway applications -- Test methods of rolling stock on test rigs
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32358-2015	399	Add to Cart	4 days	Railway applications -- Test methods of rolling stock on test rigs	Valid

Similar standards

GB 146.2   GB 146.1   GB/T 21562.3   GB/T 32350.2   GB/T 32350.1   

Basic data

Standard ID: GB/T 32358-2015 (GB/T32358-2015)
Description (Translated English): Railway applications -- Test methods of rolling stock on test rigs
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: S04
Classification of International Standard: 29.280
Word Count Estimation: 19,139
Date of Issue: 2015-12-31
Date of Implementation: 2016-07-01
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32358-2015: Railway applications -- Test methods of rolling stock on test rigs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Railway applications - Test methods of rolling stock on test rigs ICS 29.280 S04 National Standards of People's Republic of China Test methods of rail rolling stock Issued on. 2015-12-31 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 test environment condition 2 5 test 2 6 Equipment 2 6.1 Test bench 2 6.2 traction test power supply 4 6.3 test bed main measuring instrument (system) 4 7 Audited Document 5 8 Test 5 8.1 Overview 5 8.2 running test bench 6 8.3 Fault simulation test 7 8.4 Thermal capacity test 7 8.5 Additional tests in parallel asynchronous motors 8 8.6 low-speed air brake test 8 8.7 torque characteristics of the motor hot state test 9 Torque characteristics of the motor when cold 8.8 Test 9 8.9 full speed torque sweep test 9 8.10 traction characteristics (traction/speed characteristic curve) Test 9 8.11 anti-slip/skid electric braking performance test 9 8.12 Speed \u200b\u200bControl System Test 10 8.13 voltage variation test 10 8.14 mutation test voltage 10 8.15 supply interruption test 10 8.16 power factor and harmonic measurement 10 Motion Stability Test 11 8.17 8.18 11 run response test 8.19 Test curve 12 8.20 vehicle suspension system vibration characteristic test 12 8.21 body vibration modal test 12 8.22 Diesel Locomotive thermal performance test 13 8.23 diesel oil cooling system and thermal balance test 13 8.24 No-load diesel fuel quantity measuring 13 9 13 test reports

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard was proposed by the State Railway Administration. This standard by the national electric traction equipment and systems Standardization Technical Committee (SAC/TC278) centralized. This standard is mainly drafted by. CSR Zhuzhou Electric Locomotive Research Institute Co., Southwest Jiaotong University. Participated in the drafting of this standard. the Ministry of Railways Product Quality Supervision and Inspection Center of electric traction equipment inspection station, Zhuzhou CSR Times Electric Co., Co., Ltd. Zhuzhou Electric Locomotive Co., Ltd., CSR Qingdao Sifang Locomotive Co., Ltd., China CNR Datong Electric Locomotive Co., Ltd., China CNR Dalian Locomotive Research Institute Co., Ltd. The main drafters of this standard. Ding Rongjun, Zhang Weihua. Participate drafters of this standard. Chen Gaohua Liu ranger, who Beijing, Ping Wu Bo, Zhou Wenxiang, Shi Wei added, Xiong Jie, Yang Chico, Dengxue Shou, Zhang committee sleeves, Liu and just. Test methods of rail rolling stock

1 Scope

This standard specifies the rail rolling stock performance test method carried out on the bench. This standard applies to rail rolling stock, including rail locomotives, EMUs, passenger cars, trucks, mass transit vehicles and engineering vehicles.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 25117.1-2010 rail rolling stock composition tests - Part 1. The inverter power supply and AC motor Combination test of its control system Part of GB/T 25117.3-2010 rail rolling stock composition Test 3. Indirect converter AC electric power Combination test machine and its control system GB/T 28806-2012 rail rolling stock test before use, after the investment is made TB/T 1407 train traction calculation procedure TB/T 1492-2002 Railway Vehicle Brake Bike Test Method TB/T 2344-2012 43kg/m ~ 75kg/m rail ordering technology TB/T 2517-1995 electric locomotive power factor and harmonic testing methods TB/T 3166 diesel locomotive traction test methods of thermal performance test TB/T 3167 test methods of diesel oil and water cooling apparatus and thermal balance test TB/T 3168 diesel locomotive idling test methods of performance test

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Rolling test stand (stand) rolingtestrig Use analog rail track wheel, and with the traction power supply and other support system for rolling stock traction, braking and kinetic experiments A set of equipment. 3.2 Rolling vibration test stand roling-vibrationtestrig Track wheel having a vibration excitation function, and complete performance dynamics rolling test bed trials. 3.3 Bench test run operationtestingonrolingtestrig Use rolling test station instead of running the pilot plant test line and the line of being. 3.4 Test track spectrum testingtrackspectrum Using testing methods such as track inspection vehicle, the typical lines for irregularity, the level of irregularity, and gauge the direction of irregularity Irregularity ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32358-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32358-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32358-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32358-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.