GB/T 32344-2015 English PDFUS$739.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32344-2015: Guidelines for the conduct of tests for distinctness, uniformity and stability -- Poplar (Populus L.) Status: Valid
Basic dataStandard ID: GB/T 32344-2015 (GB/T32344-2015)Description (Translated English): Guidelines for the conduct of tests for distinctness, uniformity and stability -- Poplar (Populus L.) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B61 Classification of International Standard: 65.020 Word Count Estimation: 35,352 Date of Issue: 2015-12-31 Date of Implementation: 2016-07-01 Regulation (derived from): State Standard Announcement 2015 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 32344-2015: Guidelines for the conduct of tests for distinctness, uniformity and stability -- Poplar (Populus L.)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Guidelines for the conduct of tests for distinctness, uniformity and stability - Poplar (Populus L.) ICS 65.020 B61 National Standards of People's Republic of China New varieties of plant specificity, consistency, Stability Test Guideline uniformityandstability-Poplar (PopulusL.) 2015-12-31 released 2016-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 terms, definitions and abbreviations 1 4 DUS test technical requirements 1 5 DUS evaluation 4 Category 6 Group 4 7 Description of traits and related symbols 5 Appendix A (normative appendix) Characteristics of seedling traits 6 Appendix B (normative) Characteristics of adult tree varieties Appendix C (informative) Technical Questionnaire format 25 Reference 29 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the State Forestry Administration and centralized. This standard is responsible for drafting units. Beijing Forestry University, the State Forestry Administration Science and Technology Development Center. The main drafters of this standard. Zhang Zhiyi, An Xinmin, Li Shanwen, Feng Xiulan, Zhao Xiyang, Zhou Jianren, Ma Mei. New varieties of plant specificity, consistency, Stability Test Guideline1 ScopeThis standard specifies the specificity, consistency and stability of new varieties of Populus L. (hereinafter referred to as DUS) Claim. This standard applies to all new varieties of Populus.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 19557.1-2004 Guidelines for Specificity, Consistency and Stability of New Varieties of Plants General 3 terms, definitions and abbreviations 3.1 Terms and definitions The terms and definitions established in GB/T 19557.1-2004 apply to this document. 3.2 abbreviations The following abbreviations apply to this document. QL --- Qualitativecharacteristics, quality traits QN --- Quantitativecharacteristics, quantitative traits PQ-Pseudo-qualitativecharacteristics, Pseudo-quality traits MG --- Measurementforagroupofplants, for a single set of plants or plant parts for a single measurement to get a single recording; MS --- Measurementforanumberofsingleplants, for a number of plants or plant parts were carried out separately Measure multiple records; VG --- Visualobservationforagroupofplants, for a group of plants or plant parts of a single visual test to get a single Record VS --- Visualobservationforanumberofsingleplants, for a group of plants or plant parts for a single Multiple records are measured; DUS --- Distinctness, uniformityandstability, specificity, consistency and stability.4 DUS test technical requirements4.1 Test material 4.1.1 Variety The applicant shall submit the test material to the quantity and quality according to the stipulated time and place. From non-test country ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32344-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32344-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32344-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32344-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
