GB/T 32337-2015 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32337-2015: Pneumatic fluid power -- Mounting interface surfaces of 3/2 solenoid valves
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32337-2015	114	Add to Cart	3 days	Pneumatic fluid power -- Mounting interface surfaces of 3/2 solenoid valves	Valid

Similar standards

GB/T 40565.2   GB/T 40565.3   GB/T 40565.4   GB/T 22107   GB/T 32336   

Basic data

Standard ID: GB/T 32337-2015 (GB/T32337-2015)
Description (Translated English): Pneumatic fluid power -- Mounting interface surfaces of 3/2 solenoid valves
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Classification of International Standard: 17.160
Word Count Estimation: 6,642
Date of Issue: 2015-12-31
Date of Implementation: 2016-07-01
Quoted Standard: ISO 1302; ISO 2768-1; ISO 4287; ISO 5598; ISO 11727
Adopted Standard: ISO 15218-2003, IDT
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the installation dimensions and sealing surface requirements for four-position three-way solenoid valves. This standard applies to the maximum rated pressure of 1.6MPa, there are three air flow channels and two mounting holes of the three-way solenoid valve.

GB/T 32337-2015: Pneumatic fluid power -- Mounting interface surfaces of 3/2 solenoid valves

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power. Mounting interface surfaces of 3/2 solenoid valves ICS 23.100.50 J20 National Standards of People's Republic of China Pneumatic two - position three - way solenoid valve mounting surface (ISO 15218..2003, Pneumaticfluidpower-3/2solenoidvalves-Mounting interfacesurfaces, IDT) 2015-12-31 released 2016-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 15218..2003 "pressure transmission two three-way solenoid valve mounting surface". And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. GB/T 131-2006 Product Geometry Technical Specification (GPS) Technical Product Representation of Surface Structures (ISO 1302..2002, IDT); --- GB/T 1804-2000 General tolerances Tolerances of linear and angular dimensions not tolerated (eqvISO 2768-1. 1989); GB/T 3505-2009 Geometrical Product Specifications (GPS) Surface Structure Contours Terms, Definitions and Surface Structures Parameters (ISO 4287..1997, IDT); Fluid powertrain and component vocabulary (ISO 5598..2008, IDT) GB/T 17446-2012. This standard has made the following editorial changes. - Fix ISO 15218..2003 error, change the Dmax on the right in Figure 1 to Dmin. This standard is proposed by the China Machinery Industry Federation. This standard by the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized. This standard is responsible for drafting units. Wuxi Pneumatic Technology Research Institute Co., Ltd. The standard to participate in the drafting unit. Ningbo Jiaer Ling Pneumatic Machinery Co., Ltd., Fenghua City Star-Electronics Co., Ltd., Zhejiang billion technology Co., Ltd., Guangdong Province Zhaoqing Fangda Pneumatic Co., Ltd., National Pneumatic Products Quality Supervision and Inspection Center, Ningbo Yadeke Automation Industry Limited company. The main drafters of this standard. Zhang Lianren, Wang Chunli, Shan Junbo, Yan Ruikang, Cao Jianbo, Wu Kefeng, Wang Wenkui, Chen Dingzhi, Lin Weijiang, Lu Bo, Xu Wei, Fang Qinghua, Chen Chenyang. Pneumatic two - position three - way solenoid valve mounting surface

1 Scope

This standard specifies the two three-way solenoid valve four specifications of the mounting surface size and sealing surface requirements. This standard applies to the maximum rated pressure of 1.6MPa, there are three air flow channels and two mounting screw holes of the two three-way solenoid valve.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 1302 Product Geometry Technical Specification (GPS) Technology Product Representation of Surface Structures (GeometricalProduct Specifications (GPS) -Indicationofsurfacetextureintechnicalproductdocumentation ISO 2768-1 General tolerances - Part 1. Tolerances of linear and angular dimensions of non-tolerable tolerances (Generaltolerances-Part 1. Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications) ISO 4287 Product Geometry Technical Specification (GPS) Surface structure. Contour terms Terminology, definitions and surface structure parameters (Geometrical ProductSpecifications (GPS) -Surfacetexture. Profilemethod-Terms, definitionsandsurfacetex- tureparameters ISO 5598 fluid drive system and component vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 11727 Pneumatic drive control valve and other components of the port and the identification of the control mechanism (Pneumaticfluidpower- Identification ofportsandcontrolmechanismsofcontrolvalvesandothercomponents)

3 terms and definitions

The terms and definitions defined in ISO 5598 apply to this document.

4 air mark

Mark the air mark according to ISO 11727. It is not required to mark the installation interface.

5 size

5.1 Dimensions and tolerances For sizes of 10 mm, 15 mm and 22 mm valves, the dimensions and tolerances are shown in Figures 1 and 1. For specifications for 30mm Of the valve, its size and tolerance requirements shown in Figure 2, Figure 3. Unregulated tolerances shall comply with ISO 2768-1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32337-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32337-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32337-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32337-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.