GB/T 32260.1-2015 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 32260.1-2015: Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 1: General Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 32260.1-2015: Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 1: General---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT32260.1-2015 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.40 J 33 Destructive Tests on Welds in Metallic Materials – Cold Cracking Tests for Weldments – Arc Welding Processes – Part 1. General (ISO 17642-1.2004, MOD) Issued on: DECEMBER 10, 2015 Implemented on: JULY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Basic Principles ... 5ForewordGB/T 32260 Destructive Tests on Welds in Metallic Materials – Cold Cracking Tests for Weldments – Arc Welding Processes is divided into the following three parts. --- Part 1. General; --- Part 2. Self-Restraint Tests; --- Part 3. Externally Load Tests. This Part is Part 1 of GB/T 32260. This Part was drafted as per the rules stipulated in GB/T 1.1-2009. This Part uses redrafting method to modify ISO 17642-1.2004 Destructive Tests on Welds in Metallic Materials – Cold Cracking Tests for Weldments – Arc Welding Processes – Part 1. General. Compared with ISO 17642-1.2004, this Part has the following technical differences and their causes are as follows. --- For the normative references, this Part makes adjustment against the technical difference, so that adapt to China’s technical conditions. The adjustment is mainly reflected in Chapter 2 “Normative References”, which is as follows. Increase the GB/T 3375 Welding Terminology; Replace partial international standards and European Standards quoted in ISO 17642-1.2005 by China’s corresponding standards. This Part was proposed by and shall be under the jurisdiction of National Standardization Technical Committee of Welding (SAC/TC 55). Drafting organizations of this Part. Shanghai Institute of Special Equipment Inspection & Technical Research, Harbin Welding Institute, Dongguan Qiancheng Laser Technology Co., Ltd., China Special Equipment Inspection And Research Institute, Tianjin Golden Bridge Welding Materials Group Co., Ltd., and China Petroleum Natural Gas Pipeline Scientific Research Academy. Drafting staffs of this Part. Xu Bin, Su Jinhua, Ou Xiaojun, Wang Kenan, Shi Kun, Yang Yongmei, Sui Yongli, and Pu Dongguang. Destructive Tests on Welds in Metallic Materials – Cold Cracking Tests for Weldments – Arc Welding Processes – Part 1. General1 ScopeThis Part in GB/T 32260 specifies the basic terms, definitions, and principles of cold cracking tests. This Part is applicable to assess the sensitivity of cold cracking on the welding materials, base metals, and welded joints.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 3375 Welding Terminology GB/T 32260.2 Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes - Part 2. Self-Restraint Tests (GB/T 32260.2-2015, ISO 17642-2.2005, MOD) GB/T 32260.3 Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes - Part 3. Externally Load Tests (GB/T 32260.3-2015, ISO 17642-3.2005, MOD)3 Terms and DefinitionsThe following terms and definitions, and those defined in GB/T 3375 are applicable to this document. 3.1 Cold cracks It indicates the welding cracks generated when the welded joints cooled off to lower temperature (for steel, below Ms temperature). Cold cracks are the local cracking ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 32260.1-2015 be delivered?Answer: The full copy PDF of English version of GB/T 32260.1-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 32260.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32260.1-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 32260.1-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 32260.1-2015?A step-by-step guide to download PDF of GB/T 32260.1-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 32260.1-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
