GB/T 32119-2023 English PDFUS$699.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32119-2023: Covering anticorrosion technology of multilayer petrolatum for marine steel structures Status: Valid GB/T 32119: Historical versions
Basic dataStandard ID: GB/T 32119-2023 (GB/T32119-2023)Description (Translated English): Covering anticorrosion technology of multilayer petrolatum for marine steel structures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A29 Classification of International Standard: 77.060 Word Count Estimation: 35,359 Date of Issue: 2023-09-07 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 32119-2015 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 32119-2023: Covering anticorrosion technology of multilayer petrolatum for marine steel structures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 77.060 CCSA29 National Standards of People's Republic of China Replace GB/T 32119-2015 Corrosion of multi-layer petrolatum coating on marine steel structures Control Technology steelstructures Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 2 4 Anti-corrosion layer structure 2 5 Anti-corrosion layer material 4 6 Construction 7 7 Inspection and Acceptance 9 8 Operation, maintenance and management 10 Appendix A (normative) Test method for temperature resistance fluidity of petrolatum anti-corrosion paste 11 Appendix B (normative) Test method for low-temperature adhesion of petrolatum anti-corrosion paste 13 Appendix C (normative) Rust test method 15 Appendix D (normative) Petrolatum anti-corrosion paste-water paste replacement test method 17 Appendix E (normative) Test method for salt water resistance of petrolatum anti-corrosion paste 18 Appendix F (Normative) Petrolatum Anti-Corrosion Paste Corrosion Test Method 20 Appendix G (normative) Test method for chemical resistance of petrolatum anti-corrosion paste 22 Appendix H (Normative) Petrolatum Anti-corrosion Tape Peel Strength Test Method 23 Appendix I (Normative) Petrolatum Anti-corrosion Tape Insulation Resistance Test Method 26 Appendix J (normative) Test method for salt water resistance of petrolatum anti-corrosion tape 28 Appendix K (normative) Petrolatum anti-corrosion tape corrosion test method 30 Appendix L (normative) Test method for chemical resistance of petrolatum anti-corrosion tape 31ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 32119-2015 "Multilayer petrolatum coating anti-corrosion technology for marine steel structures" and is the same as GB/T 32119- Compared with.2015, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The "sealing cement" items and requirements are deleted (see Table 1 of the.2015 version), and the requirements for the "post-construction appearance" of the anti-corrosion layer are added (see Table 1); b) Changed "tensile strength" to "breaking strength" and requirements, and "insulation resistivity" to "insulation resistance" and indicators (see Table 3,.2015 Table 3 of the.2015 version), and the indicator "peel strength retention rate" in "low temperature operability" was deleted (see Table 3 of the.2015 version); c) The appearance, performance indicators and detection methods of "sealing cement" are deleted (see Table 1 and 5.2.3 of the.2015 version); d) Changed the sealing buffer layer requirements (see 5.2.3.1, 5.2.3.2, 5.2.3.3, 5.2.4 of the.2015 edition); e) The impact strength requirements and testing methods have been changed (see Table 4, Table 5 of the.2015 version); f) Added “anti-corrosion protective cover” prefabrication requirements (see 5.2.4.2); g) Added the "integrated anti-corrosion layer" clause (see 5.2.5). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Corrosion Control Standardization Technical Committee (SAC/TC381). This document was drafted by. Institute of Oceanography, Chinese Academy of Sciences, Nanjing Antie Anticorrosion Technology Co., Ltd., Qingdao Diante New Material Technology Co., Ltd. Co., Ltd., China Corrosion Control Technology Association, Weifang Dongfang Steel Pipe Co., Ltd., National Oil and Gas Pipeline Network Group Co., Ltd. South China Branch Company, Zhejiang Institute of Digital Intelligence Technology Co., Ltd., Qingdao University of Technology, Shanghai Maritime University, State Nuclear Power Demonstration Power Plant Co., Ltd., Shandong Blue Ocean Technology Co., Ltd., China Corrosion International Corrosion Control Engineering Technology Research Institute (Beijing) Co., Ltd., Shandong CRRC Wind Power Co., Ltd. Division, Jiangsu Jinling Special Coating Co., Ltd., Jiangsu Zhongkuang Dazheng Surface Engineering Technology Co., Ltd., Shenzhen Guoneng Chentai Technology Co., Ltd., He Nan Province Sihai Anti-corrosion Group Co., Ltd., Guangdong Yudean Zhanjiang Wind Power Co., Ltd., Guanghan Huaqi Anti-corrosion Engineering Co., Ltd., Zhejiang Weihua New Materials Co., Ltd., Zhejiang Tiantie Industrial Co., Ltd., China Railway Construction Bridge Engineering Bureau Group Materials Trading Co., Ltd., Jiangsu Dibang Construction Construction Engineering Co., Ltd., Henan Special Defense Construction Group Co., Ltd., Hebei Weilifang Technology Co., Ltd., Tianjin Qianfeng Anti-corrosion Insulation Engineering Co., Ltd. Co., Ltd., Henan Puxin Anti-corrosion Construction Engineering Co., Ltd., Shandong Haichuan Intelligent Equipment Technology Co., Ltd., Beijing Bihai Yunzhi New Material Technology Co., Ltd. ART LIMITED. The main drafters of this document. Hou Baorong, Zhao Xia, Wang Jing, Wang Chenghua, Jin Zuquan, Zhang Zhiming, Chen Shibo, Li Jike, Zhai Xiaofan, Zhang Zengpei, Zhang Zhiyu, Wang Ning, Yang Lihui, He Xiaoyu, Wang Yingrong, Tian Zhongshan, Wang Weizhong, Yu Hao, Zheng Zhi, Zhang Li, Liu Tao, Dong Lihua, Wang Guiming, Jiao Shoulei, Sun Congzheng, Bian Zhibing, Ma Qinglei, Kang Zhuangsu, Ni Ya, Li Yan, Lin Bin, Li Xianxiu, Yan Yun, Gu Tianling, Zeng Dong, Wen Guosong, Wang Long, Jin Yongjun, Jin Guan, Xu Jizhuan, Chen Jun, Zhang Hongtao, Lu Qijiang, Ji Chuanling, Yu Faxin, Zhang Yunfeng, Fan Xijun, Bi Shijun, Liu Tao, Zhao Xiangyue, Li Yanhai, Di Taishen, You Dongjun, Xie Jing. This document was first published in.2015 and this is the first revision. Corrosion of multi-layer petrolatum coating on marine steel structures Control Technology1 ScopeThis document specifies the anti-corrosion layer structure, anti-corrosion layer materials, construction and inspection of multi-layer petrolatum coating corrosion control technology for marine steel structures. and acceptance, operation, maintenance and management. This document is applicable to the multi-layer petrolatum coating corrosion-resistant technology for steel structures in marine environments, and steel structures in land, river, and lake environments. The multi-layer petrolatum coating corrosion control reference is used.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 269 Determination of cone penetration of grease and petroleum grease GB/T 1447 Test method for tensile properties of fiber reinforced plastics GB/T 1449 Test method for bending properties of fiber reinforced plastics GB/T 1451 Test method for simple beam impact toughness of fiber reinforced plastics GB/T 1462 Test method for water absorption of fiber reinforced plastics GB/T 1725 Determination of non-volatile content of paints, varnishes and plastics GB/T 2577 Test method for resin content of glass fiber reinforced plastics GB/T 3536 Determination of flash point and fire point of petroleum products Cleveland open cup method GB/T 3820 Determination of thickness of textiles and textile products GB/T 3854 Barcol hardness test method for reinforced plastics GB/T 3923.1 Tensile properties of textile fabrics Part 1.Determination of breaking strength and elongation at break (strip method) GB/T 8026 Determination of melting point of petroleum wax and petroleum grease droplets GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics GB/T 8923.1-2011 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 1.Uncoated The corrosion grade and treatment grade of the steel surface and the steel surface after the original coating has been completely removed GB/T 8923.2-2008 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 2.Coated The treatment level after partial removal of the original coating on the steel surface GB/T 10125 Artificial atmosphere corrosion test salt spray test GB/T 13377 Determination of density or relative density of crude oil and liquid or solid petroleum products Capillary plug pycnometer and graduated Double capillary pycnometer method GB/T 17470 Glass fiber chopped strand mat and continuous strand mat GB/T 18370 fiberglass roving GB/T 30650 Testing method for low temperature operability of petrolatum anti-corrosion tapes GB/T 30651 Testing method for high temperature fluidity resistance of petrolatum anti-corrosion tape CB/T 180 Hand lay-up molding process for marine glass fiber reinforced plastic products ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32119-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 32119-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32119-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32119-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 32119-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 32119-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
