GB/T 31002.1-2014 English PDFUS$579.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31002.1-2014: Ergonomics -- Manual handling -- Part 1: Lifting and carrying (ISO 11228-1: 2003, MOD) Status: Valid
Basic dataStandard ID: GB/T 31002.1-2014 (GB/T31002.1-2014)Description (Translated English): Ergonomics -- Manual handling -- Part 1: Lifting and carrying (ISO 11228-1: 2003, MOD) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A25 Classification of International Standard: 13.180 Word Count Estimation: 25,288 Date of Issue: 9/3/2014 Date of Implementation: 2/1/2015 Quoted Standard: GB/T 5703-2010; GB/T 20000.4; EN 1005-2; GB/T 16856.1; GB/T 16856.2 Adopted Standard: ISO 11228-1-2003, MOD Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the quality manual lifting and transferring recommended limits, respectively, considering the influence of the task intensity, frequency and duration. This Standard provides guidance for the assessment of population health risk ass GB/T 31002.1-2014: Ergonomics -- Manual handling -- Part 1: Lifting and carrying (ISO 11228-1: 2003, MOD)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Ergonomics Manual handling Part 1. Lifting and carrying (ISO 11228-1.2003, MOD) ICS 13.180 A25 National Standards of People's Republic of China Ergonomic manual Part 1. Lifting and transfer Ergonomics-Manualhandling-Part 1. Liftingandcarrying (ISO 11228-1.2003, MOD) Issued on. 2014-09-03 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 31002 "Ergonomics manual" intends divided into the following three parts. --- Part 1. lifting and transfer; --- Part 2. push and pull; --- Part 3. high frequency low load operation. This section GB/T Part of 131,002. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted Law Amendment uses ISO 11228-1.2003 "Ergonomics manual - Part 1. Lifting and shifting give away". This part of ISO 11228-1.2003 and its technical differences for the following reasons. --- Recommend quality limit modified by 25kg to 23kg, to meet the physical characteristics of the Chinese people. --- Appendix A.7.2 by "object width 0.70m" instead of "object width 0.75m"; use "vM = 1-0.3 × | 0.70-v |" Instead of "vM = 1-0.3 × | 0.75-v |"; use "if v > 1.70, then vM = 0" instead of "if v > 1.75, then vM = 0 "; with" v < 0.70m "instead of" v < 0.75m "; use" v≥0.70m "instead of" v≥0.75m "; with" v < 0.70m "instead of "V < 0.75m"; use "v≥0.70m" instead of "v≥0.75m", to meet the physical characteristics of the Chinese people. --- Appendix B.1.1 modified stepwise model example of the quality package, pallet size and the corresponding results, with the appendix A and Appendix C of technical amendments consistent. --- Appendix Table C.1 modify the reference mass different working groups (mref), the upper limit of the general working population reference quality (mref) by 23kg down to 20kg, adult working population reference quality (mref) fell by a 25kg 23kg, participate in full-time work the crowd Test quality (mref) an added 25kg to comply with Chinese characteristics of the human body. This part made the following editorial changes. --- Revised Figure A.1, Figure A.2, Figure B.1 The Legend. This part of the National Standardization Technical Committee learned Ergonomics (SAC/TC7) and focal points. This section drafted by. China National Institute of Standardization, Northeast Normal University, Tsinghua University, Shenzhen City, measuring Detection Co., Ltd., Beijing Airlines Empty Space University, National Institute of Sports Science, Dongguan Science and Technology Advisory Service Centre. The main drafters of this section. Zhang Xin, Xu Hongqi, notes in the quotations Yuan, Zhu Ping, Xiang weeks ago, Hao Wei-ya, so Ran Hua Shiji Peng, call Huimin, Linzi Hong, Li, Yang Fan.IntroductionMusculoskeletal disorders are common worldwide, but also often in the incidence of occupational health. Size and quality of the manual operation object operating position, the operating frequency, duration and other factors can operate alone or in combination to produce a crisis Insurance operating activities, triggering the risk of musculoskeletal disorders. The ideal approach is. Considering the operating position, the operating frequency and duration of operation, given the quality of the operation target recommended limit Value, so that people can reasonably and effectively perform manual labor. Ergonomic hand lifting method for reducing operational risk transfer is very effective. Good job design is especially important, in particular, the operation Tasks and work space design, which may include the use of appropriate auxiliary equipment. This section provides a step by step approach of evaluation methods to assess the manual lifting and transferring health risks. We are given at each step The recommended limits. In addition, in Appendix A, Appendix B and Appendix C also gives guidelines for usability ergonomics manual mechanism. This section provides risk assessment model can be used for risk assessment associated with manual operation. This model considers the lifting and manual operation As the risk factors associated with (unfavorable conditions), and the duration of manual operation. Adverse conditions may be the operation target mass is too large, Or lifting present during twisting, bending, operating spacing is too large, which are not comfortable operating position. This section includes repetitive and non-repetitive hand Workers lifting operation. Recommended limits are comprehensive utilization of epidemiology, biomechanics, physiology, psychophysics four key research obtained by the method. Ergonomic manual Part 1. Lifting and transfer1 ScopeThis section GB/T 31002 specifies the quality manual lifting and transferring recommended limits were considered the task intensity, frequency and duration Influence of time. This section of population health risk assessment evaluation work multiple tasks variables to provide guidance. This section applies to the mass of the object is not less than 3kg manual lifting and transferring. This section applies to hand on a level surface moderate pace (0.5m/s ~ 1.0m/s) of the transfer operation. This section does not apply to static gripping objects (stagnant), push or pull objects, single object portable lift, sitting manual operation, and two or Multiplayer lifting objects. Grip, manual sliding objects will be specified in other parts of this standard. This section 8h-based daily working hours. This section does not apply to a combination of task analysis of day within one shift.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references version, the latest edition (including any amendments) applies to this document. GB/T 5703-2010 for the technical design of the Basic human body measurements (ISO 7250-1.2008, MOD) GB/T 16856 (all parts), Safety of machinery - Risk assessment [ISO 14121 (all parts)] GB/T 20000.4 Guide for standardization - Part 4. Safety aspects Standard (GB/T 20000.4-2003, ISO / IEC Guide51, MOD) EN1005-2 Safety of machinery - Human physical performance - Part 2. manual and mechanical parts (Safetyofmachinery- Humanphysicalperformance-Part 2. Manualhandlingofmachineryandcomponentpartsofmachin- ery)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Manual manualhandling To mention the use of human, release, transfer or otherwise, or constraint object moving activities. Note. The object also includes a human or animal. 3.2 Hand lift manuallifting In the absence of auxiliary machinery and equipment conditions, up from an initial position of moving objects. Note. The object also includes a human or animal. 3.3 Hand lowered manuallowering In the absence of auxiliary machinery and equipment conditions, down from an initial position of moving objects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31002.1-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31002.1-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31002.1-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31002.1-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
