GB/T 3098.2-2015 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB/T 3098.2-2015: Mechanical properties of fasteners -- Nuts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 3098.2: Historical versions
Similar standardsGB/T 3098.2-2015: Mechanical properties of fasteners -- Nuts---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3098.2-2015GB NATIONAL STANDARD ICS 21.060.10 J 13 Replacing GB/T 3098.2-2010, GB/T 3098.4-2000 Mechanical properties of fasteners - Nuts (ISO 898-2.2012, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2.Nuts with specified property classes - Coarse thread and fine pitch thread, MOD) Issued on. DECEMBER 10, 2015 Implemented on. JANUARY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the PRC. Table of ContentsForeword... 3 1 Scope... 7 2 Normative references... 8 3 Symbols... 9 4 Designation systems... 10 5 Design of bolt and nut assemblies... 11 6 Materials... 12 7 Mechanical properties... 14 8 Inspection... 18 9 Test method... 19 10 Marking... 24 Appendix A (Informative) Design principles of nuts... 29 Appendix B (Informative) Thread dimensions for the test mandrel... 32ForewordGB/T 3098 “Mechanical properties of fasteners” is composed of the following parts. - GB/T 3098.1 Mechanical properties of fasteners - Bolts, Screws and studs - GB/T 3098.2 Mechanical properties of fasteners - Nuts; - GB/T 3098.3 Mechanical properties of fasteners - Set screws; - GB/T 3098.5 Mechanical properties of fasteners - Tapping screws; - GB/T 3098.6 Mechanical properties of fasteners - stainless steel bolts, screws and studs; - GB/T 3098.7 Mechanical properties of fasteners - Thread rolling screws - GB/T 3098.8 Mechanical properties of fasteners - Components for bolted connections made mainly from materials with a high temperature strength; - GB/T 3098.9 Mechanical properties of fasteners - Prevailing torque type steel hexagon nuts; - GB/T 3098.10 Mechanical properties of fasteners - Bolts, screws, studs, and nuts made of non-ferrous metals; - GB/T 3098.11 Mechanical properties of fasteners - Self-drilling tapping screws; - GB/T 3098.12 Mechanical properties of fasteners - Cone proof load test on nuts; - GB/T 3098.13 Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm - GB/T 3098.14 Mechanical properties of fasteners - Fasteners - Mechanical properties - Widening test on nuts; - GB/T 3098.15 Mechanical properties of fasteners - Nuts made of stainless steel; - GB/T 3098.16 Mechanical properties of fasteners - Stainless steel set screws; - GB/T 3098.17 Mechanical properties of fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method; - GB/T 3098.18 Mechanical properties of fasteners - Blind rivets testing; - GB/T 3098.19 Mechanical properties of fasteners - Blind rivets with break pull mandrel; - GB/T 3098.20 Mechanical properties of fasteners - Wing nuts with specified proof torque; - GB/T 3098.21 Mechanical properties of fasteners - Stainless steel tapping screws; - GB/T 3098.22 Mechanical properties of fasteners made of the fine grain non-heat treatment steel - Bolts, screws and studs; This part is part 2 of GB/T 3098. This part was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 3098.2-2000 “Mechanical properties of fasteners - Nuts - Coarse thread” and GB/T 3098.4-2000 “Mechanical properties of fasteners - Nuts - Fine pitch thread”. As compared with GB/T 3098.2-2000 and GB/T 3098.4-2000, the main changes of this part are as follows. - COMBINE the two standards, MODIFY the standard name; - ADD the examples for selection and application of low temperature and high temperature steel, AND it may make reference to the contents of EN 10269, ASTM F 2281 and ASTM A 320/A 320M (SEE note 2 of Clause 1); - SPEFICY the code used in this part (SEE Clause 3); - SPECIFY the three types of nuts and their markings based on nut height (SEE 4.1); - ADD the design requirements for the bolt-nut connection (SEE Clause 5, Appendix A); - ADD that “when a thin nut is used as a lock nut, it shall be used together with a regular nut or high nut. During installation, it shall firstly tighten the thin nut on the assembly part, AND then tighten the regular nut or high nut on the thin nut”; (SEE Clause 5); - CANCEL the style 1 grade 4 coarse thread nuts (SEE Table 1 ~ Table 6); - MAKE the following requirements for the coarse thread 04, 5, 6, 8 (style 2), 8 (style 1, D ≤ M16), and grade 9 AND the fine pitch thread 04, 5, 6 (D ≤ M16) and grade 8 nuts “it may be quenched and tempered at the discretion of the manufacturer”; (SEE footnote d of Table 3); - ADD the requirements “it shall have sufficient hardenability” for the product material requiring “quenching and tempering”; (SEE footnote e of Table 3); - Not SPECIFY the proof stress, thread stress cross-sectional area, and the thin nut failure load (SEE Table 7; Table 3, Table 5, Table 6 and Table 7 of 2000 version); - ADD Brinell hardness and Rockwell hardness indicators (SEE Table 6, Table 7); - ADD the provisions that the manufacturer, supplier and purchaser may choose their own method to test the quality of products (SEE Clause 8); - ADD the requirements for testing machines and fixtures (SEE 9.1.3); - ADD that “The sample shall be such nuts as passing the size inspections, the GB/T 228.1 is referred, the separation rate of the test machine chuck shall not exceed 3 mm/min, AND during the test, it shall limit the conditions exceeding the proof load value at the minimum degree” (SEE 9.1.5); - This part specifies that the minimum load for the Vickers hardness test is 98 N, and adds the Brinell hardness test load (SEE 9.2.3.1); - In this part, USE the “Appendix A. Design principles of nuts” to replace the “Appendix A. Bolt connection bearing capacity” of GB/T 3098.2-2000, and ADJUST comprehensively the relevant content; - In this part, “Failure mode of bolt-nut connection” does not contain “looseness of nuts and screws” (SEE A.1; 3.1 of 2000 version); - In this part, ADD the “Appendix B. Test mandrel thread size”. This part, through the re-drafting method, modifies and adopts the ISO 898-2.2012 “Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2.Nuts with specified property classes - Coarse thread and fine pitch thread” (English version). As compared with ISO 898-2.2012, the main changes are as follows. - CHNAGE the standard name; - In the reference documents, USE Chinese standards to replace international standards (SEE Clause 2); - ISO 898-2 makes reference to “ISO286-2 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2.Tables of standard tolerance grades and limit deviations for holes and shafts” (SEE Clause 2); - In ISO 898-2, it specifies that “These tests shall be carried out in the manufacturing process or in the final inspection”, which is in contradiction with the provisions of 8.1 for the manufacturer's inspection, so it is not adopted in this part (SEE Clause 7, 8.1); - In ISO 898-2, it does not specify the basis for hardness conversion; in this part, it specifies that if using the Brinell or Rockwell hardness test, it shall conduct conversion in accordance with ISO 18265.2013 (SEE 9.2.2). This part was proposed by the China Machinery Industry Federation. This part shall be under the jurisdiction of the National Standardization Technical Committee on Fasteners (SAC/TC 85). The responsible drafting organization of this part. China Machine Productivity Promotion Center. This participating drafting organizations of this part. Haiyan Yuxing Nut Co., Ltd., Shanghai Shenguang High Strength Bolt Co., Ltd., Shanghai Jinma High Strength Fastener Co., Ltd., Hebei Xinde Power Accessories Co., Ltd., Ningbo Jiulong Fastener Manufacturing Co., Ltd. Shandong Gaoqiang Fasteners Co., Ltd., Zhejiang Huarui Standard Parts Co., Ltd., Jinyi Industrial Co., Ltd., Machinery Industry General Parts Product Quality Supervision and Testing Center, Ningbo Mingli Fasteners Co., Ltd. As for this part, the Secretariat of the National Standardization Technical Committee for Fasteners is responsible for interpretation. This part replaces the standard previously issued as follows. - GB/T 3098.2-1982, GB/T 3098.2-2000. - GB/T 3098.4-1986, GB/T 3098.4-2000. Mechanical properties of fasteners - Nuts1 ScopeThis part of GB/T 3098 specifies the mechanical and physical properties of the nuts with coarse thread and fine pitch thread made of carbon steel or alloy steel when tested at ambient temperature range of 10 °C to 35 °C.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.3 SymbolsFor the purposes of this document, the following symbols apply.4 Designation systemsThe marking and labelling of nuts with property classes shall be as specified in Clause 10 for only those nuts which meet all applicable requirements of this part. The ranges of nominal diameters in relation to nut style and property class are as given in Table 1.5 Design of bolt and nut assembliesExplanations of basic design principles of nuts and loadability of bolted assemblies are given in Appendix A. Thin nuts used as jam nuts shall be assembled together with a regular nut or high nut.6 MaterialsTable 3 specifies the material and heat treatment for different property classes of nuts.7 Mechanical propertiesWhen tested by the methods specified in Clause 9, the nuts of the specified property class shall meet, at ambient temperature, the requirements for the proof loads (SEE Table 4 and 5) AND for the hardness (SEE Table 6 and 7).8 InspectionThe supplier tests the nuts which he provides using methods of their choice (periodic evaluation of the manufacturer, checking of test results from the manufacturers, physical tests on the nuts, etc), provided the mechanical and physical properties specified in Table 3, 4, 5, 6 and 7 are met.9 Test methodThe tensile testing machine shall be in accordance with GB/T 16825.1, class 1 or better. Side thrust on the nut shall be avoided, e.g. by self-aligning grips. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 3098.2-2015 be delivered?Answer: The full copy PDF of English version of GB/T 3098.2-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 3098.2-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3098.2-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3098.2-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 3098.2-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3098.2-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 3098.2-2015?A step-by-step guide to download PDF of GB/T 3098.2-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 3098.2-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
