GB/T 30776-2014 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30776-2014: Measurement of break strength and elongate at break for adhesive tapes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30776-2014	229	Add to Cart	3 days	Measurement of break strength and elongate at break for adhesive tapes	Valid

Similar standards

GB/T 41657   GB 30982   GB/T 31125   GB/T 43747   GB/T 30777   GB/T 30774   

Basic data

Standard ID: GB/T 30776-2014 (GB/T30776-2014)
Description (Translated English): Measurement of break strength and elongate at break for adhesive tapes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G38
Classification of International Standard: 83.180
Word Count Estimation: 10,145
Date of Issue: 7/8/2014
Date of Implementation: 12/1/2014
Quoted Standard: GB/T 22396
Adopted Standard: ISO 29864-2007, MOD
Regulation (derived from): 2014 National Standards Bulletin No. 18
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the tape is stretched to the tensile strength (also known as the breaking strength) at break and elongation at break of test methods. This Standard provides a method to assess the dry glue with the tensile strength and elongation a

GB/T 30776-2014: Measurement of break strength and elongate at break for adhesive tapes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measurement of break strength and elongate at break for adhesive tapes ICS 83.180 G38 National Standards of People's Republic of China Test methods for strength and elongation at break of the adhesive tape stretched (ISO 29864.2007, Selfadhesivetapes-Measurementof breakstrengthandelongateatbreak, MOD) Issued on. 2014-07-08 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted Law Amendment uses ISO 29864.2007 "self-adhesive tape tensile strength and elongation at break of the test side law". This standard and ISO 29864.2007 compared to the adjustments made in the structure, listed in Appendix A of this standard and ISO 29864.2007 The reg number control list. This standard and ISO 29864.2007 as compared to the existence of technical differences in terms of these differences has been involved through its outer margins Vertical single-line position (|) have been marked, Appendix B gives a list of the technical differences and their causes. Standard also ISO 29864.2007 made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- "Filament fiber backing pressure-sensitive adhesive tape" to "fiber-reinforced adhesive tape." The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee adhesive (SAC/TC185) centralized. This standard was drafted. Wing Tai (Zhongshan) Co., Ltd. Kaiping City, Yu Qi Adhesive Products Co., Ltd., Shanghai Institute of Rubber Products, Guangzhou Hongchang Adhesive Tape Factory, Shanghai Regent Rayon Co., Ltd.. Drafters of this standard. He Hanjian, Chenhua Chang, Wu Weiqing, Rogier, Chen Weibin, Cheng Xin, Li Haijun, Shi Yifeng, Tangmin Feng, Yin Yu Sheng. Test methods for strength and elongation at break of the adhesive tape stretched

1 Scope

This standard specifies the tape is stretched to a tensile strength (also known as the breaking strength) at break and elongation at break of the test methods. This standard provides an assessment of the tape tensile strength and elongation at break of consistent method for a variety of adhesive tape performance comparison.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 22396 the term pressure-sensitive Adhesive

3 Terms and Definitions

GB/T 22396 and defined by the following terms and definitions apply to this document. 3.1 Tensile strength tensilestrength Sample anti-fracture ability under specified conditions, usually N/cm for the unit. Note. Tensile strength is required to be expressed in units of MPa. 3.2 Elongation at break elongationatbreak Percentage elongation at break and the initial sample length markings, expressed as a percentage (%). Category 4 This test method according to the tape substrate is divided into two types. Method A. applicable to the determination of strength and elongation at break of ordinary adhesive tape substrate stretch; Method B. applicable to the determination of the fiber-reinforced tape tensile strength and elongation at break. Principle 5 Two vertical tensile testing machine fixture clamp adhesive tape sample was stretched to a break, to obtain the tensile properties (tensile strength, elongation at break Long rates). Method A. A tape is placed between two clamps, two jig in the vertical center line, at a predetermined rate until the tape pulling force fracture. Method B. The sample is placed in the fiber-reinforced tape on two cylinders, two cylinders in a vertical center line, at a predetermined rate Tensile force is applied until the tape breaks. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30776-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30776-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30776-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30776-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.