Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 307.4-2017 English PDF

US$519.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 307.4-2017: Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values
Status: Valid

GB/T 307.4: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 307.4-2017519 Add to Cart 4 days Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values Valid
GB/T 307.4-2012439 Add to Cart 3 days Rolling bearings -- Tolerances -- Part 4: Tolerances for thrust bearings Obsolete
GB/T 307.4-2002319 Add to Cart 3 days Rolling bearings -- Thrust bearings -- Tolerances Obsolete
GB/T 307.4-1994199 Add to Cart 2 days Rolling bearings--Thrust ball bearings--Tolerances Obsolete

Similar standards

GB/T 304.9   GB/T 307.3   GB/T 304.2   GB/T 304.3   GBZ/T 307.1   GBZ/T 307.2   

Basic data

Standard ID: GB/T 307.4-2017 (GB/T307.4-2017)
Description (Translated English): Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J11
Classification of International Standard: 21.100.20
Word Count Estimation: 26,285
Date of Issue: 2017-11-01
Date of Implementation: 2018-05-01
Older Standard (superseded by this standard): GB/T 307.4-2012
Regulation (derived from): National Standard Announcement 2017 No. 29
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 307.4-2017: Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings-Thrust bearings-Geometrical product specifications (GPS) and tolerance values ICS 21.100.20 J11 National Standards of People's Republic of China Replace GB/T 307.4-2012 Rolling bearing thrust bearing Product Geometric Specifications (GPS) and tolerance values (ISO .199.2014, IDT) Released.2017-11-01 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued

Content

Foreword I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 symbol 1 5 limit deviation and tolerance value 5 5.1 General 5 5.2 Ordinary tolerances 5 5.3 6-level tolerance 6 5.4 Level 5 tolerance 8 5.5 Level 4 Tolerance 9 Appendix A (informative) The relationship between the symbols and terms in the.2012 edition of the standard and the descriptions in this section 11 Appendix B (informative) Example of thrust bearing characteristics and specification drawings Appendix C (informative) Examples of ISO 1132-1 [4] and ISO 14405-1 terms and definitions 13 Appendix D (informative) Legend and description of the linear dimension specification modifier 16 Reference 22

Foreword

GB/T 307 is divided into four parts. ---GB/T 307.1 Rolling bearing radial bearing product geometry specification (GPS) and tolerance values; ---GB/T 307.2 Principles and methods for measurement and inspection of rolling bearings; ---GB/T 307.3 General technical rules for rolling bearings; ---GB/T 307.4 Rolling bearing thrust bearing product geometry specification (GPS) and tolerance values. This part is the fourth part of GB/T 307. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 307.4-2012 "Rolling bearing tolerances Part 4. Thrust bearing tolerances", and GB/T 307.4- Compared with.2012, the main technical changes are as follows. ---Modified standard name (see cover and front page, cover and front page of.2012 edition); ---Modified the meaning and representation of the symbol (see Chapter 4, Chapter 4 of the.2012 edition); --- Added pattern annotation (see Figure 1 ~ Figure 4); --- It is clear that the tolerance value of Si does not apply to the central shaft ring (see Table 2, Table 4, Table 6, Table 8, Table 1, Table 3, Table 5, Table 7 of the.2012 edition); --- Added four appendices and references (see Appendix A ~ Appendix D and references). This part uses the translation method equivalent to ISO .199.2014 "Rolling bearing thrust bearing product geometry technical specification (GPS) and public Difference. The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 6930-2002 Rolling Bearing Vocabulary (ISO 5593.1997, IDT) This part was proposed by the China Machinery Industry Federation. This part is under the jurisdiction of the National Rolling Bearing Standardization Technical Committee (SAC/TC98). This section drafted by. Luoyang Bearing Research Institute Co., Ltd., Zhangzhou Meiya Special Bearing Factory, Shanghai Tianan Bearing Co., Ltd. The main drafters of this section. Du Xiaoyu, Li Feixue, Zhou Youhua, Gu Jinfang, Zhang Bowen. The previous versions of the standards replaced by this section are. ---GB 307-1964, GB 307-1977; ---GB 307.1-1984 (part); ---GB/T 307.4-1994, GB/T 307.4-2002, GB/T 307.4-2012.

Introduction

This part is the geometry of the mechanical parts specified in the Product Geometric Specifications (GPS) system (see ISO /T R14638 [10] Master Plan) Prime standard. Unless otherwise specified, the basic principles of ISO /GPS given in ISO 8015 [7] apply to this part, given in ISO 14253-1 [8]. The default principles apply to the technical specifications established in accordance with this section. It is recommended to consider the relationship between functional requirements and measurement methods and measurement uncertainty. The traditional measurement method is ISO 1132- A description is given in 2[5], and measurement uncertainty is recommended to focus on ISO 14253-2 [9]. Rolling bearing thrust bearing Product Geometric Specifications (GPS) and tolerance values

1 Scope

This part of GB/T 307 specifies the dimensional characteristics of the thrust bearing, the limit deviation from the nominal size and the tolerance value to limit the thrust. The interface of the bearing (except for chamfering). The nominal form factor is given in ISO 104 [1]. This section does not apply to certain special types of thrust bearings (such as thrust needle roller bearings) or thrust bearings used in special occasions (such as special Thrust precision bearings). The tolerances of these bearings are given in the corresponding standards. The chamfer size limit is given in ISO 582 [3].

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 5593 Rolling Bearing Vocabulary (Rolingbearings-Vocabulary) ISO 14405-1 Geometrical Product Specifications (GPS) Dimensional Tolerance Part 1. Linear Dimensions (Geometricalproduct Specifications(GPS)-Dimensionaltolerancing-Part 1.Linearsizes) ISO /T S17863 Product Geometry Specification (GPS) Geometric tolerances for moving components (Geometricalproductspecifica- Tion(GPS)-Geometricaltolerancingofmoveableassemblies)

3 Terms and definitions

The terms and definitions defined by ISO 5593, ISO 14405-1 and ISO /T S17863 apply to this document.

4 symbol

To indicate the application of the ISO /GPS system, ie ISO 8015 [7], the technical product documentation (as shown) should contain dimensional characteristics, These feature-related dimensional specifications are described in Table 1 and Figures 1 through 4. The description of the symbols is consistent with the GPS terminology; see Appendix A for the relationship to traditional terms. The tolerance values associated with the characteristics are denoted by t plus the characteristic symbol, such as tΔdmp. The default ISO size specification set in this section is consistent with ISO 14405-1, which is valid for two-point sizes. Some specification modifiers are in It is described in Appendix D. The terms in ISO 14405-1 are not completely equivalent to the definitions of the traditional terms in ISO 1132-1 [4]. See Appendix C for the differences. Table 1 Nominal size symbols, characteristic symbols, and specification modifiers Nominal size symbol a characteristic symbol a GPS symbol and specification modifier b, c description d One-way bearing shaft ring nominal inner diameter 1,2 Δdmp The average size of the inner diameter of the shaft in any section (out Deviation from its nominal size from two-point size 1,2 Table 1 (continued) Nominal size symbol a characteristic symbol a GPS symbol and specification modifier b, c description d d Vdsp Two-point size of the inner diameter of the collar in any section range 1,2 D2 Two-way bearing middle shaft nominal diameter 3,4 Δd2mp The average size of the inner diameter of the middle shaft in any section (from two-point size) deviation from its nominal size 3,4 Vd2sp Two-point size of the inner diameter of the inner shaft ring in any section range 3,4 Seat nominal outer diameter 1,2,3,4 ΔDmp The average size of the outer diameter of the race in any section (out Deviation from its nominal size from two-point size 1,2,3,4 VDsp Two-point size of the outer diameter of the race in any section range 1,2,3,4 One-way bearing complete set bearing nominal height 1,2 ΔTs e One-way bearing complete bearing height minimum external scale Deviation between inch and its nominal size 1,2 T1 Two-way bearing complete bearing nominal height 3,4 ΔT1s e The minimum external dimension of the bearing height of the two-way bearing Deviation between inch and its nominal size 3,4 Sef Thrust cylindrical roller bearings. raceway raceway and back Range of two-point size between thicknesses 2,4 Thrust ball bearing. by the axis of the outer surface of the race Raceway and raceway back obtained from any longitudinal section Range of minimum spherical dimensions between corresponding points 1,3 Sif Thrust cylindrical roller bearings. shaft raceway and back Range of two-point size between thicknesses Thrust ball bearing. by the axis of the shaft through the shaft The longitudinal section of the raceway and the back of the collar The range of the smallest spherical size between the corresponding points a In addition to the format, the symbols defined in ISO 15241 [12]. b According to the symbol defined in ISO 14405-1. c The specification modifier " " is not marked on the drawing because the two-point size is the default size specification modifier. d Description according to ISO 14405-1. e Gravity direction symbol “ ” according to ISO /T S17863, see Figure 1~4. f Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. The labels in Figures 1 through 4 indicate the relationship between the interface dimensions and the corresponding dimensional tolerance symbols. Note. Figures 1 to 4 are only drawn diagrammatically and do not necessarily show all structural details. See Appendix B for examples of two actual pattern labels. Description. 1---seat; 2---axis ring. Figure 1 Unidirectional bearing size specification --- Thrust ball bearing Description. 1---seat; 2---axis ring. Figure 2 Unidirectional bearing size specification --- Thrust cylindrical roller bearing Description. 1---seat; 2---axis ring. Figure 3 bidirectional bearing size specification --- thrust ball bearing Description. 1---seat; 2---axis ring. Figure 4 Bidirectional bearing size specification --- Thrust cylindrical roller bearing

5 Limit deviation and tolerance value

5.1 General The limit deviation and tolerance values of one-way and two-way thrust bearings are shown in Table 2 to Table 9. Note. In addition to the inner diameter of the center collar, some features of the center shaft will be revised in a future release. The following symbols U and L are used in Tables 2 to 9. U---upper limit deviation; L---lower limit deviation. 5.2 Ordinary tolerances See Table 2 and Table 3. Table 2 Shaft, Middle Shaft and Bearing Height---Common Tolerance Limit Deviation and Tolerance Value in Micrometers d and d2 Mm tΔdmp,tΔd2mp > ≤ UL tVdsp, tVd2sp tSia,b tΔTs tΔT1s ULUL - 18 0 -8 6 10 20 -250 150 -400 18 30 0 -10 8 10 20 -250 150 -400 30 50 0 -12 9 10 20 -250 150 -400 50 80 0 -15 11 10 20 -300 150 -500 80 120 0 -20 15 15 25 -300.200 -500 120 180 0 -25 19 15 25 -400.200 -600 180 250 0 -30 23 20 30 -400 250 -600 250 315 0 -35 26 25 40 -400 - - 315 400 0 -40 30 30 40 -500 - - 400 500 0 -45 34 30 50 -500 - - 500 630 0 -50 38 35 60 -600 - - 630 800 0 -75 55 40 70 -750 - - 800 1000 0 -100 75 45 80 -1000 - - 1000 1250 0 -125 95 50 100 -1400 - - 1250 1600 0 -160 120 60 120 -1600 - - 1600.2000 0 -200 150 75 140 -1900 - - 2000 2500 0 -250 190 90 160 -2300 - - Note. For two-way bearings, the tolerance value is only applicable to bearings with d2 ≤ 190mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. Table 3 Seat---Common Tolerance Limit Deviation and Tolerance Value in Micron Mm tΔDmp > ≤ UL tVDsp tSea 10 18 0 -11 8 18 30 0 -13 10 30 50 0 -16 12 50 80 0 -19 14 80 120 0 -22 17 120 180 0 -25 19 180 250 0 -30 23 250 315 0 -35 26 315 400 0 -40 30 400 500 0 -45 34 500 630 0 -50 38 630 800 0 -75 55 800 1000 0 -100 75 1000 1250 0 -125 95 1250 1600 0 -160 120 1600.2000 0 -200 150 2000 2500 0 -250 190 2500 2850 0 -300 225 With the same bearing shaft The same tSi value Note. For two-way bearings, the tolerance value is only applicable to bearings with D ≤ 360mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. 5.3 6-level tolerance See Table 4 and Table 5. Table 4 Shaft, Middle Shaft and Bearing Height - Grade 6 Tolerance Limit Deviation and Tolerance Value in Micrometers d and d2 Mm tΔdmp,tΔd2mp > ≤ UL tVdsp, tVd2sp tSia,b tΔTs tΔT1s ULUL - 18 0 -8 6 5 20 -250 150 -400 18 30 0 -10 8 5 20 -250 150 -400 30 50 0 -12 9 6 20 -250 150 -400 50 80 0 -15 11 7 20 -300 150 -500 80 120 0 -20 15 8 25 -300.200 -500 Table 4 (continued) Limit deviation and tolerance values in microns d and d2 Mm tΔdmp,tΔd2mp > ≤ UL tVdsp, tVd2sp tSia,b tΔTs tΔT1s ULUL 120 180 0 -25 19 9 25 -400.200 -600 180 250 0 -30 23 10 30 -400 250 -600 250 315 0 -35 26 13 40 -400 - - 315 400 0 -40 30 15 40 -500 - - 400 500 0 -45 34 18 50 -500 - - 500 630 0 -50 38 21 60 -600 - - 630 800 0 -75 55 25 70 -750 - - 800 1000 0 -100 75 30 80 -1000 - - 1000 1250 0 -125 95 35 100 -1400 - - 1250 1600 0 -160 120 40 120 -1600 - - 1600.2000 0 -200 150 45 140 -1900 - - 2000 2500 0 -250 190 50 160 -2300 - - Note. For two-way bearings, the tolerance value is only applicable to bearings with d2 ≤ 190mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. Table 5 Seat - Grade 6 tolerance limit deviation and tolerance value in microns Mm tΔDmp > ≤ UL tVDsp tSea 10 18 0 -11 8 18 30 0 -13 10 30 50 0 -16 12 50 80 0 -19 14 80 120 0 -22 17 120 180 0 -25 19 180 250 0 -30 23 250 315 0 -35 26 315 400 0 -40 30 400 500 0 -45 34 500 630 0 -50 38 630 800 0 -75 55 With the same bearing shaft The same tSi value Table 5 (continued) Limit deviation and tolerance values in microns Mm tΔDmp > ≤ UL tVDsp tSea 800 1000 0 -100 75 1000 1250 0 -125 95 1250 1600 0 -160 120 1600.2000 0 -200 150 2000 2500 0 -250 190 2500 2850 0 -300 225 With the same bearing shaft The same tSi value Note. For two-way bearings, the tolerance value is only applicable to bearings with D ≤ 360mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. 5.4 5-level tolerance See Table 6 and Table 7. Table 6 Shaft, Middle Shaft and Bearing Height - Grade-5 Tolerance Limit Deviation and Tolerance Value in Micrometers d and d2 Mm tΔdmp,tΔd2mp > ≤ UL tVdsp, tVd2sp tSia,b tΔTs tΔT1s ULUL - 18 0 -8 6 3 20 -250 150 -400 18 30 0 -10 8 3 20 -250 150 -400 30 50 0 -12 9 3 20 -250 150 -400 50 80 0 -15 11 4 20 -300 150 -500 80 120 0 -20 15 4 25 -300.200 -500 120 180 0 -25 19 5 25 -400.200 -600 180 250 0 -30 23 5 30 -400 250 -600 250 315 0 -35 26 7 40 -400 - - 315 400 0 -40 30 7 40 -500 - - 400 500 0 -45 34 9 50 -500 - - 500 630 0 -50 38 11 60 -600 - - 630 800 0 -75 55 13 70 -750 - - 800 1000 0 -100 75 15 80 -1000 - - 1000 1250 0 -125 95 18 100 -1400 - - 1250 1600 0 -160 120 25 120 -1600 - - 1600.2000 0 -200 150 30 140 -1900 - - 2000 2500 0 -250 190 40 160 -2300 - - Note. For two-way bearings, the tolerance value is only applicable to bearings with d2 ≤ 190mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. b Not applicable to the center shaft ring. Table 7 Seat---5-level tolerance limit deviation and tolerance value in microns Mm tΔDmp > ≤ UL tVDsp tSea 10 18 0 -11 8 18 30 0 -13 10 30 50 0 -16 12 50 80 0 -19 14 80 120 0 -22 17 120 180 0 -25 19 180 250 0 -30 23 250 315 0 -35 26 315 400 0 -40 30 400 500 0 -45 34 500 630 0 -50 38 630 800 0 -75 55 800 1000 0 -100 75 1000 1250 0 -125 95 1250 1600 0 -160 120 1600.2000 0 -200 150 2000 2500 0 -250 190 2500 2850 0 -300 225 With the same bearing shaft The same tSi value Note. For two-way bearings, the tolerance value is only applicable to bearings with D ≤ 360mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. 5.5 4-level tolerance See Table 8 and Table 9. Table 8 Shaft, Middle Shaft and Bearing Height - Grade-4 Tolerance Limit Deviation and Tolerance Value in Micrometers d and d2 Mm tΔdmp,tΔd2mp > ≤ UL tVdsp, tVd2sp tSia,b tΔTs tΔT1s ULUL - 18 0 -7 5 2 20 -250 150 -400 18 30 0 -8 6 2 20 -250 150 -400 30 50 0 -10 8 2 20 -250 150 -400 50 80 0 -12 9 3 20 -300 150 -500 80 120 0 -15 11 3 25 -300.200 -500 120 180 0 -18 14 4 25 -400.200 -600 180 250 0 -22 17 4 30 -400 250 -600 250 315 0 -25 19 5 40 -400 - - 315 400 0 -30 23 5 40 -500 - - 400 500 0 -35 26 6 50 -500 - - 500 630 0 -40 30 7 60 -600 - - 630 800 0 -50 40 8 70 -750 - - Note. For two-way bearings, the tolerance value is only applicable to bearings with d2 ≤ 190mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°. b Not applicable to the center shaft ring. Table 9 Seat - Grade-4 tolerance limit deviation and tolerance value in microns Mm tΔDmp > ≤ UL tVDsp tSea 10 18 0 -7 5 18 30 0 -8 6 30 50 0 -9 7 50 80 0 -11 8 80 120 0 -13 10 120 180 0 -15 11 180 250 0 -20 15 250 315 0 -25 19 315 400 0 -28 21 400 500 0 -33 25 500 630 0 -38 29 630 800 0 -45 34 800 1000 0 -60 45 With the same bearing shaft The same tSi value Note. For two-way bearings, the tolerance value is only applicable to bearings with D ≤ 360mm. a Only for thrust balls and thrust cylindrical roller bearings with a contact angle of 90°.

Appendix A

(informative appendix) Relationship between symbols and terms in the.2012 edition of the standard and the descriptions in this section Table A.1 Description of the symbols Nominal size symbol characteristic symbol Terminology in the.2012 edition of the standard One-way bearing shaft ring nominal inner diameter one-way bearing shaft ring nominal inner diameter Δdmp one-way bearing shaft single plane average inner diameter deviation The average size of the inner diameter of the shaft in any section (from two Point size) deviation from its nominal size Vdsp one-way bearing shaft ring single plane inner diameter variation within any section, the inner diameter of the shaft ring two-point size range D2 Two-way bearing, shaft ring, nominal inner diameter, two-way bearing, shaft ring, nominal diameter Δd2mp Single plane average inner diameter of the shaft ring in the two-way bearing deviation The average size of the inner diameter of the central collar in any section (from Two-point size) deviation from its nominal size Vd2sp biaxial bearing, the variation of the single plane inner diameter of the shaft ring in any section, the range of the two-point size of the inner diameter of the middle shaft ring Nominal outer diameter seat ring nominal outer diameter ΔDmp seat single plane average outer diameter deviation The average size of the outer diameter of the race in any section (from two Point size) deviation from its nominal size VDsp seat single plane outer diameter variation in any section, the outer diameter of the seat two-point size range One-way bearing nominal height one-way bearing complete set bearing nominal height ΔTs one-way bearing actual height deviation The minimum external dimension of the one-way bearing complete bearing height Deviation of its nominal size T1 Two-way bearing nominal height two-way bearing complete bearing nominal height ΔT1s bidirectional bearing actual height deviation The minimum external dimension of the bearing height of the two-way bearing Deviation of its nominal size Variation in thickness betw......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 307.4-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 307.4-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 307.4-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 307.4-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 307.4-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 307.4-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.