GB/T 30589-2014 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30589-2014	145	Add to Cart	Auto, < 3 mins	Steel wire rope terminations -- Ferrule-securing sling	Valid

Similar standards

GB/T 33026   GB/T 32795   GB/T 33363   GB/T 45460   GB/T 30588   GB/T 30587   

Basic data

Standard ID: GB/T 30589-2014 (GB/T30589-2014)
Description (Translated English): Steel wire rope terminations -- Ferrule-securing sling
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H49
Classification of International Standard: 77.140.65
Word Count Estimation: 31,369
Date of Issue: 6/9/2014
Date of Implementation: 1/1/2015
Quoted Standard: GB/T 246; GB/T 699; GB/T 3190-2008; GB/T 2828.1; GB/T 4437.1; GB/T 8706; GB 8918; GB/T 14436; GB/T 20067; GB/T 20118; YB/T 4398; YB/T 5359
Adopted Standard: BS EN 13411-3-2004+A1-2008, MOD
Regulation (derived from): National Standards Bulletin No. 11 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms and definitions sleeve pressed wire rope rigging, design and processing documents, materials, casing repression, type testing, factory inspection, marking and quality certificate. This standard applies to the nominal diam

GB/T 30589-2014: Steel wire rope terminations -- Ferrule-securing sling

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel wire rope terminations. Ferrule-securing sling ICS 77.140.65 H49 National Standards of People's Republic of China Steel cord to suppress the end of the sleeve rigging Issued on. 2014-06-09 2015-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 design document processing orders 2 5 raw material 2 5.1 Rope 2 5.2 sleeve 3 Pressing the sleeve 4 6 6.1 General 4 6.2 casing and matching rope 4 6.3 Cable buckle molding 4 6.4 sleeve pressing program 6 6.5 Quality control after pressing the sleeve 6 7 type examination 6 8 8 delivery inspection Marking and certification 8 9 Appendix A (informative) pressed aluminum sleeve folded at the cable buckle design requirements 10 Annex B (informative) steel casing repression of wraparound cable clasp Regulation 21 Annex C (informative) This standard EN13411-3.2004 A1.2008 (E) technical differences and reg number table 26

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted law revision using EN13411-3.2004 A1.2008 (E) "end of the rope - Safety - Part 3. Casing and casing repression "(in English). Appendix C of this standard are given a list of the technical differences and their reasons for reference. For comparison, in Appendix C of this standard are listed and EN13411-3.2004 A1.2008 (E) chapter, article numbers against a Lanbiao. For ease of use, this standard also made the following editorial changes. --- Remove the EN13411-3.2004 A1.2008 (E) Introduction; --- Remove the EN13411-3.2004 A1.2008 (E) Foreword, in accordance with national standards require adding a new preface; --- Remove the EN13411-3.2004 A1.2008 (E) Annex ZA and Annex ZB. The standard proposed by China Iron and Steel Association. This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized. This standard was drafted. East Coast Marine Engineering Co., Ltd. Kunshan, Juli Rigging Co., Ltd. Jianfeng rigging, metallurgy workers Industry Information Standards Institute, Guizhou Wire Rope (Group) Co., Ltd., Shanghai is Shanghai Metal Products Co., Ltd., Guangzhou, Hong Feng Lifting Tools Limited, Mr Hutchison International Limited of Hong Kong. The main drafters of this standard. driving Long Dong, Wang Si Jun, Liyan Ying, Li Guoying, Cui Zhiqiang, Li Yong, Wang Lingjun, Linxiang Ji, Li Lun Friends, Eddie Woo, Xu Ke, Zhu Hongbin, Rencui Ying. Steel cord to suppress the end of the sleeve rigging

1 Scope

This standard specifies the terms and definitions sleeve pressed wire rope rigging, design and processing documents, materials, casing repression, type test, Delivery inspection, marking and quality certificate. This standard applies to the nominal diameter of not more than 150mm, the intensity level is not greater than 1960MPa rope sleeve pressing rigging.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 246 metal pipe Flattening test methods GB/T 699 high-quality carbon structural steel GB/T 3190-2008 Wrought aluminum and aluminum alloy chemical composition GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 4437.1 aluminum and aluminum alloy extruded tube - Part 1. Seamless Pipe GB/T 8706 wire rope terminology, designation and classification GB 8918 important uses rope GB/T 14436 General industrial products assurance documents GB/T 20067 large diameter rope GB/T 20118 General Purpose Wire Rope YB/T 4398 compaction rope YB/T 5359 compacted strand wire rope

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Cable sleeve pressing buckle ferrule-securedeyetermination By pressing ferrule cable clasp is formed at the end of the rope (this standard refers only 3.2, 3.3 cannula pressed cable clasp buckle two kinds of cable). 3.2 Casing repression of wraparound cable clasp flemisheyeferrule-securedtermination By the end of the rope and the body of the wraparound sleeve strands pressing method of forming a cable clasp (see Fig. 2). 3.3 Pressing sleeve folded at the cable buckle turn-backeyeferrule-securedtermination By rope and rope end folded body pressing ferrule cable clasp formed (see Figure 3). 3.4 Sleeve pressing ring rigging ferrule-securedendlessloop By the end of the lap joint using wire rope pressing sleeve ring rope rigging (see Figure 4). ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30589-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30589-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30589-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30589-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.