GB/T 30588-2014 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30588-2014: Terminations for steel wire ropes -- Molten metal socketing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30588-2014	369	Add to Cart	3 days	Terminations for steel wire ropes -- Molten metal socketing	Valid

Similar standards

GB/T 33026   GB/T 32795   GB/T 33363   GB/T 45460   GB/T 30589   GB/T 30587   

Basic data

Standard ID: GB/T 30588-2014 (GB/T30588-2014)
Description (Translated English): Terminations for steel wire ropes -- Molten metal socketing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H49
Classification of International Standard: 77.140.65
Word Count Estimation: 16,179
Date of Issue: 6/9/2014
Date of Implementation: 1/1/2015
Quoted Standard: GB 8918; GB/T 16825.1; GB/T 20067; GB/T 20118; YB/T 5295; YB/T 5359; HG/T 2542; JB/T 5000.13
Adopted Standard: BS EN 13411-4-2002+A1-2008, MOD
Regulation (derived from): National Standards Bulletin No. 11 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the cast alloy steel cord to the socket end (hereinafter referred to as casting sling) product classification, requirements, test methods, marking, packaging, transportation and storage. This standard applies to not less than 6 mm

GB/T 30588-2014: Terminations for steel wire ropes -- Molten metal socketing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terminations for steel wire ropes. Molten metal socketing ICS 77.140.65 H49 National Standards of People's Republic of China Alloy cast steel cord to the socket end Issued on. 2014-06-09 2015-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Category 1 4.1 Order Contents 1 4.2 Classification and Code 2 4.3 Part 3 4.4 Example 3 mark 5 requires 3 5.1 Parts and Materials 3 5.2 casting preparation 3 Cleaning 5 5.3 5.4 Consolidation casting 5 5.5 sling assembly quality 6 6 Test methods 6 6.1 Visual inspection 6 6.2 tensile test 7 6.3 Inspection Rule 7 6.4 determination Principle 8 6.5 marks 8 7 signs, packaging, transportation and storage 8 7.1 Product tag or label mark 8 7.2 Packaging 8 7.3 Transport 8 7.4 Storage 8 Appendix A (informative) casting alloy cable section 9 Annex B (informative) Operating Temperature 10 Annex C (informative) This standard EN13411-4.2002 A1.2008 technical differences and their causes 11 Annex D (informative) This standard EN13411-4.2002 A1.2008 Chapter 12 Control strip

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted law revision using EN13411-4.2002 A1. "steel cord to end fixed connection 2008-- Safety - Part 4 . Alloy and resin cast sockets "(in English). This standard gives a list of the technical differences and their causes in Appendix C for reference. The Standard made the following editorial changes. --- "This European standard" be replaced by "this standard"; --- Remove EN13411-4.2002 A1.2008 "Directory", "Preface", cast resin content, and Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix ZA; --- Normative references will be changed to comply with our country's national standards and industry standards. The standard proposed by China Iron and Steel Association. This standard by the National Standardization Committee on Steel (SAC/TC183) centralized. This standard was drafted. Juli Rigging Co., Jianfeng rigging Co., Ltd. Kunshan, east coast marine engineering, metallurgical engineering Industry Information Standards Institute, Guizhou Wire Rope (Group) Co., Ltd., Dongguan City Hardware Co., Ltd. Jia Yi Jian. The main drafters of this standard. Yang Jianguo, Wang Ying, Ting tree, ZHU Li-ping, Cui Zhiqiang, Li Yong, Dong Long drive, Si-Jun, Zhou Zhongdong, I still view, Li Min, Wang Lingjun, Zhu Hongbin, Rencui Ying. Alloy cast steel cord to the socket end

1 Scope

This standard specifies the cast alloy steel cord to the socket end (hereinafter referred to as casting sling) product classification, requirements, test methods, marking, package Loading, transport and storage. This standard applies to not less than 6mm diameter rope hoisting or traction slings alloy casting.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 8918 important uses rope Inspection and tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1 calibration GB/T 20067 large diameter rope GB/T 20118 General Purpose Wire Rope YB/T 5295 Sealing rope YB/T 5359 compacted strand wire rope HG/T 2542 Industrial trichlorethylene JB/T 5000.13 Heavy Machinery General technical requirements - Part 13. Packaging

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Cable socket section Steel cord to the end having a conical cavity connector. 3.2 Alloy casting socket moltenmetalsocketing With a molten alloy steel cord to the end of the consolidation process. 3.3 Hook hooking The end of the wire rope bent hook needed.

4 Products

4.1 ordering content According to the standard order contract or order should include the following. a) number of this standard; b) the product name; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30588-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30588-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30588-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30588-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.