GB/T 30465-2013 English PDFUS$174.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30465-2013: Agricultural equipment -- Mechanical connections between towed and towing vehicles -- Implement hitch rings and attachment to tractor drawbars Status: Valid
Basic dataStandard ID: GB/T 30465-2013 (GB/T30465-2013)Description (Translated English): Agricultural equipment -- Mechanical connections between towed and towing vehicles -- Implement hitch rings and attachment to tractor drawbars Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B90 Classification of International Standard: 65.060.10 Word Count Estimation: 9,970 Quoted Standard: GB/T 19408.3-2009 Adopted Standard: ISO 21244-2008, IDT Regulation (derived from): National Standards Bulletin 2013 No. 27 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the GB/T 19408. 3 of the tractor towing a U-shaped device connected to agricultural trailers and trailed implements mounted ring size requirements. GB/T 30465-2013: Agricultural equipment -- Mechanical connections between towed and towing vehicles -- Implement hitch rings and attachment to tractor drawbars---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Agricultural equipment.Mechanical connections between towed and towing vehicles.Implement hitch rings and attachment to tractor drawbars ICS 65.060.10 B90 National Standards of People's Republic of China Agricultural machinery Towing vehicle and the mechanical connection between the towing vehicle And means coupling the tractor Tools mount ring and connecting means (ISO 21244.2008, IDT) Issued on. 2014-10-01 2013-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 21244.2008 Mechanical even "agricultural machinery towing vehicles and towed vehicles between Then a tractor hitch coupling of tools mount ring and connecting device "(in English). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized. This standard was drafted. Luoyang Xiyuan vehicle inspection and Power Limited, Chinese Academy of Agricultural Mechanization Sciences. The main drafters of this standard. still Rope, Lv Shusheng Zheng Yue, Wang Qiang, Liu Dongwei. Agricultural machinery Towing vehicle and the mechanical connection between the towing vehicle And means coupling the tractor Tools mount ring and connecting means1 ScopeThis standard specifies the Farm trailer and GB/T 19408.3 in tractor pulling a U-shaped device attached and trailed implements mounted ring Size requirements.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19408.3-2009 Agricultural vehicles towing trailers and mechanical connections - Part 3. Tractor drawbar (ISO 6489-3.2004, IDT)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Offset angle angleofyaw Angle of rotation around the vertical axis through the vehicle connecting point [see Fig. 3a)]. 3.2 Pour elevation angleofpitch Around the vehicle via the connection point to the vehicle longitudinal plane of symmetry perpendicular to the horizontal axis of rotation angle [see Fig. 3b)]. 3.3 Angle of roll angleofrol Around the vehicle via a connection point, the angle of the vehicle on a horizontal axis of rotation of the plane of symmetry [see Fig. 3c)].4 size requirements4.1 Hitch size should meet the requirements of Figure 1 and Table 1, Figure 2 and Table 2, and can be rotated according to the provisions of Figure 3 and Table 3. 4.2 PTO power is divided according to GB/T 19408.3 specified in, hitch dimensions divided into six categories. NOTE. For information on the combined mount Appendix A. Figure 4.3 uses mount ring shown in Figure 1 or 2 spherical mount ring towing load shall GB/T 19408.3-2009 Table 1 OK ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30465-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30465-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 30465-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30465-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
