GB/T 30242-2013 English PDF

US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30242-2013: General specification for magnetoelectric velocity transducer
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30242-2013	399	Add to Cart	3 days	General specification for magnetoelectric velocity transducer	Valid

Similar standards

GB/T 21296.5   GB/T 21296.4   GB/T 21296.3   GB/T 15561   GB/Z 14482   GB/T 21296.6   

Basic data

Standard ID: GB/T 30242-2013 (GB/T30242-2013)
Description (Translated English): General specification for magnetoelectric velocity transducer
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N13
Classification of International Standard: 17.080
Word Count Estimation: 17,126
Quoted Standard: GB/T 191-2008; GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.3-2006; GB/T 2423.5-1995; GB/T 2423.10-2008; GB/T 2423.17-2008; GB/T 2423.22-2012; GB/T 2829-2002; GB/T 7666-2005; GB/T 13384-2008
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the magnetic velocity sensor classification and model name, requirements, test methods, inspection rules, packaging and storage. This standard applies to the use of electromagnetic induction principle amount will be converted to an

GB/T 30242-2013: General specification for magnetoelectric velocity transducer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for magnetoelectric velocity transducer ICS 17.080 N13 National Standards of People's Republic of China Magnetic velocity sensor General technical requirements Issued on. 2013-12-31 2014-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Categories 1 and type designation 3.1 Category 1 3.2 Type designation 1 4 Requirements 1 4.1 General 1 4.2 Scope of the technical requirements of 2 4.3 Operating Conditions 2 4.4 Technical Requirements 3 4.4.1 Appearance 3 4.4.2 mark 3 4.4.3 Weight 3 4.4.4 Outline and installation size 3 4.4.5 output resistance 3 4.4.6 Insulation Resistance 3 4.4.7 Insulation strength 3 4.4.8 Reference sensitivity (when applicable) 3 4.4.9 Frequency response (when applicable) 3 (If applicable) 4.4.10 amplitude linearity 3 4.4.11 transverse sensitivity ratio (when applicable) 3 (If applicable) 4.4.12 frequency response range 4 4.4.13 output signal frequency (if applicable) 4 4.4.14 output signal to noise ratio (where applicable) 4 4.4.15 sensitivity drift over time (if applicable) 4 4.4.16 output signal frequency drift over time (if applicable) 4 4.4.17 thermal sensitivity drift (when applicable) 4 4.4.18 heat output signal frequency drift (when applicable) 4 4.4.19 temperature storage 4 4.4.20 cold storage 4 4.4.21 temperature change 4 4.4.22 Vibration 5 4.4.23 Impact 5 4.4.24 Damp heat 5 4.4.25 Salt spray 5 Test Method 5 5 5.1 Test conditions 5 5.1.1 test environment condition 5 5.1.2 Arbitration environmental conditions 5 5.2 Test System 6 General provisions 5.3 Test 6 5.3.1 Installation and connection 6 5.3.2 Place and preheat 6 5.4 Test 6 5.4.1 Exterior 6 5.4.2 mark 6 5.4.3 Weight 6 5.4.4 Outline and installation size 6 5.4.5 Output Resistance 6 5.4.6 Insulation resistance 6 5.4.7 Dielectric Strength 6 5.4.8 Reference sensitivity 7 5.4.9 Frequency response 7 5.4.10 amplitude linearity 7 5.4.11 transverse sensitivity than 8 5.4.12 Frequency response 8 5.4.13 output signal frequency 8 5.4.14 output signal to noise ratio 8 5.4.15 sensitivity drift over time 8 5.4.16 output signal frequency drift over time 9 5.4.17 thermal sensitivity drift 9 5.4.18 output signal frequency thermal drift 9 5.4.19 temperature storage 10 5.4.20 cold storage 10 5.4.21 temperature change 10 5.4.22 Vibration 10 5.4.23 Impact 10 5.4.24 Damp heat 10 5.4.25 Salt spray 10 10 6 Inspection Rules 6.1 Inspection classification 10 6.2 factory inspection 11 12 6.3 Type inspection 6.3.1 Test principle 12 6.3.2 Sampling plan and decision rules 12 7 Packaging and storage 12 7.1 Packaging 12 7.2 Storage 12

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard is proposed and managed by China Machinery Industry Federation. This standard was drafted. National Instruments Component Quality Supervision and Inspection Center, Shenyang Academy of Instrumentation Science, Hengyang Heng electrical instrument has Ltd., China Electronics Technology Group Corporation 29th Institute, Department of Shenyang Booz Bin Nisi Sensing Technology Co., Ltd., Industrial machinery equipment Instrumentation Technology and Economy Institute. The main drafters of this standard. Li Yanfu, Xuqiu Ling, Liu Diandong, YU Zhen Yi, Wu Hong, Liu Xiangheng, Fan Shuxin, Sun Rentao, Jin Lihui. Magnetic velocity sensor General technical requirements

1 Scope

This standard specifies the magnetic speed sensor classification and type designation, requirements, test methods, inspection rules, packaging and storage. This standard applies to the use of electromagnetic induction principle amount of speed into an electrical signal output of magnetic speed sensor (hereinafter referred to as the sensor Device).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191-2008 Packaging - Pictorial signs GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt GB/T 2423.22-2012 Environmental testing - Part 2. Test methods - Test N. Temperature change GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test) GB/T 7666-2005 and sensor nomenclature codes GB/T 13384-2008 mechanical and electrical products packaging General technical conditions

3 Classification and model name

3.1 Classification Magnetic velocity sensor according to the sensed speed types are divided into the amount of magnetic type rotational speed sensor (hereinafter referred to as speed sensor) and magnetic Electric vibration velocity sensor (hereinafter referred to as vibration velocity sensors). 3.2 Type designation Sensor model naming should be consistent with the provisions of GB/T 7666-2005 of.

4 Requirements

4.1 General Shall comply with the technical requirements of the sensor requirements of this standard, a detailed specification of the requirements should not fall below this standard. When the requirements of this standard and detailed When fine specification requirements inconsistent detail specification shall prevail. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30242-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30242-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30242-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30242-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.