GB/T 30208-2013 English PDF

US$934.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30208-2013: Aerospace graphic symbols for hydraulic and pneumatic systems
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30208-2013	934	Add to Cart	3 days	Aerospace graphic symbols for hydraulic and pneumatic systems	Valid

Similar standards

GB/T 38905   GB/T 38239   GB/T 36249   GB/T 30206.2   GB/T 30206.3   GB/T 30206.1   

Basic data

Standard ID: GB/T 30208-2013 (GB/T30208-2013)
Description (Translated English): Aerospace graphic symbols for hydraulic and pneumatic systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: V04
Classification of International Standard: 49.080
Word Count Estimation: 47,487
Adopted Standard: ISO 5859-1991, IDT
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the aerospace hydraulic, pneumatic systems and components for graphical symbols and connectors, measuring and indicating devices, valves, pumps and motors, actuators and other components for graphical symbols.

GB/T 30208-2013: Aerospace graphic symbols for hydraulic and pneumatic systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aerospace graphic sympbols for hydraulic and pneumatic systems ICS 49.080 V04 National Standards of People's Republic of China Aerospace hydraulic, pneumatic systems and components for graphical symbols (ISO 5859.1991, IDT) Issued on. 2013-12-31 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 5859.1991 "aerospace hydraulic, pneumatic systems and components graphic symbols." This standard made the following editorial changes. --- Deleted ASAS1290A modified content; --- Modify the section numbers; --- All units will be moved to the front of the Imperial Metric. The standard proposed by China Aviation Industry Corporation. This standard by the National Standardization Technical Committee on Aircraft (SAC/TC435) centralized. This standard was drafted. Aviation of China Institute of Technology, China Aviation Industry Corporation First Aircraft Design and Research Institute. The main drafters of this standard. Liu Qin Cheng, LATIN Xupeng Guo. Aerospace hydraulic, pneumatic systems and components for graphical symbols

1 Scope

This standard specifies the aerospace hydraulic, pneumatic systems and components, graphic symbols and connectors, measuring and indicating devices, valves, pumps and horses Graphics up, actuators and other components of the symbol. This standard applies to aerospace fluid systems and accessories.

2 Symbol Rules

Rule 2.1 linewidth Narrowest line width as "T", a basis weight of 0.25mm (0.010in), mainly used to represent the low-pressure pipe, valve flow channel or small Tube outer contour line, arrow, etc. Schematic other types or sizes can be specified in proportion to the width to make appropriate adjustments. base This symbol section width to "T" as the base multiplied, and marked in the upper right corner of the graphic symbol. 2.2 Common linewidth Common width as follows. --- T = 0.25mm (0.010in), low-pressure circuit and so on; --- 1.5T = 0.4mm (0.0150in), contour lines and block diagrams; --- 3T = 0.64mm ~ 0.75mm (0.025in ~ 0.030in), high voltage circuit.

3 symbols

3.1 Basic symbols No. Component Name Description graphic symbols 3.1.1 Energy conversion means. Pumps, motors, master cylinder (Main unit) Swinging hydraulic cylinders, a flow restrictor 3.1.2 Heat exchanger (condensing , Heaters, temperature Controller) 3.1.3 Motors, air vortex Wheel, air receivers, generator 3.1.4 Auxiliary pump, motor, can be Removable filter filter Core, rotating attachments Pressure controller, thermal machines, filters ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30208-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30208-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30208-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30208-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.