GB/T 30193-2013 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30193-2013: Test method for endurance performance of earth-mover tyres
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30193-2013	139	Add to Cart	3 days	Test method for endurance performance of earth-mover tyres	Valid

Similar standards

GB/T 29041   GB/T 30195   GB/T 30196   GB/T 30197   

Basic data

Standard ID: GB/T 30193-2013 (GB/T30193-2013)
Description (Translated English): Test method for endurance performance of earth-mover tyres
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G41
Classification of International Standard: 83.160.99
Word Count Estimation: 6,639
Quoted Standard: GB/T 2980; GB/T 6326; HG/T 2177
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the OTR tire durability testing terms and definitions, test equipment and precision requirements, test methods, test reports. This standard applies to new construction machinery tires.

GB/T 30193-2013: Test method for endurance performance of earth-mover tyres

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for endurance performance of earth-mover tyres ICS 83.160.99 G41 National Standards of People's Republic of China OTR tire endurance test methods Issued on. 2013-12-31 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association. The standard tire rim by the National Standardization Technical Committee (SAC/TC19) centralized. Drafting of this standard. Guizhou Tyre Co., Triangle Tyre Co., Ltd., Aeolus Tyre Co., Ltd., Hangzhou State ZC Rubber Co., Ltd., Shandong Linglong Tyre Co., Double Coin Holdings Ltd., Xuzhou Xu Lun Rubber Co., Ltd., State Chemical Rubber Co., Guilin, Beijing Rubber Industry Research and Design Institute, Michelin (China) Investment Co., Ltd., Dongguan City Environmental Protection Bureau Lingyu Technology Limited. The main drafters of this standard. Yang Shichun, Cheng Hongwei, beam gold move, Zhu Haitao, Mao Jianqing, Chen Shaomei, Rae comfort, Pei Xiaohui, Zhao Meng Yi, Xu Lihong, Lu Yi, Liu, Lin Yongping. OTR tire endurance test methods

1 Scope

This standard specifies the OTR tire durability testing equipment and precision requirements, test methods can test Terms and Definitions experiment report. This standard applies to new construction machinery tires.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2980 OTR tire specifications, size, pressure and load GB/T 6326 tires terms and definitions HG/T 2177 quality tire appearance

3 Terms and Definitions

GB/T 6326 defined by the following terms and definitions apply to this document. 3.1 Test drum speed testdrumspeed When steel test drum rotating drum surface in the circumferential direction linear velocity. 3.2 Test speed testspeed Test drum speed.

4 test equipment and precision

4.1 Durability Tester 4.1.1 The testing machine drum diameter should be 3000mm ± 30mm or 5000mm ± 50mm or 7000mm ± 70mm. 4.1.2 Test drumhead drum testing machine should be smooth steel surface, its width should be greater than or equal to the total cross-section width of the tire test. 4.1.3 Test load capacity of the loading device should be able to meet the requirements of the test method, an accuracy of ± 1.5% of full scale. 4.1.4 Test Drum speed capability and test equipment shall meet the requirements of the test method, the speed accuracy is 2 0km/h. 4.1.5 Test Drum radial runout should ≤0.25mm. 4.1.6 Ambient temperature measuring device should be set in the range from the test tires of 150mm ~ 1000mm. 4.2 pneumatic pressure gauge Inflator gauge range should be at least 1000kPa, an accuracy of ± 20kPa. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30193-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30193-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30193-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30193-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.