GB/T 29834.3-2013 English PDF

US$579.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29834.3-2013: Maintainability of system and software -- Part 3: Testing method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29834.3-2013	579	Add to Cart	5 days	Maintainability of system and software -- Part 3: Testing method	Valid

Similar standards

GB/T 39099   GB/T 25000.51   GB/T 28172   GB/T 29831.1   GB/T 29831.2   GB/T 29834.2   

Basic data

Standard ID: GB/T 29834.3-2013 (GB/T29834.3-2013)
Description (Translated English): Maintainability of system and software -- Part 3: Testing method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L77
Classification of International Standard: 35.080
Word Count Estimation: 25,238
Quoted Standard: GB/T 11457; GB/T 29834.1; GB/T 29834.2
Regulation (derived from): National Standards Bulletin No. 22 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: how to get maintainability index measurements Test methods. This standard applies to: have maintenance needs all kinds of systems and software. This standard does not apply to "single-use" or during use without change systems and

GB/T 29834.3-2013: Maintainability of system and software -- Part 3: Testing method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Maintainability of system and software Part 3. Testing method ICS 35.080 L77 National Standards of People's Republic of China Systems and software maintenance Part 3. Test methods Part 3. Testingmethod Issued on. 2013-11-12 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions Overview 4 1 Analysis of 5 Yi 2 5.1 Failure diagnosis efficiency 2 5.1.1 Failure diagnostic accuracy 2 5.1.2 failure diagnosis time 2 5.2 pairs failure diagnostic support 3 5.2.1 Effective clue Example 3 5.2.2 understandable clues Comparative Example 4 5.2.3 audit trail capability 4 Modular 5 6 Coupling between modules 5 6.1 6.2 module rational structure 6 7 7 Normative 7.1 Code legibility 7 Adequacy 7.1.1 Notes 7 7.1.2 Notes normative 7 7.1.3 Code normative 8 7.1.4 Compliance Codes of 9 7.2 Guidance Document Maintenance 9 7.2.1 maintenance of guidance 9 The degree of adaptation 7.2.2 documentation and software 9 Normative data 10 7.3 Normative data 7.3.1 10 8 Changeability 11 8.1 modifiability 11 8.1.1 of the code can be modified 11 8.1.2 Configurability 11 8.2 modify the efficiency of the implementation of 12 8.2.1 change cycle efficiency of 12 8.2.2 modify the efficiency of the implementation of 12 8.2.3 modify the complexity of the 13 8.3 modify controllability 13 13 8.3.1 reducible modified 8.3.2 software change control capability 14 9 Stability 14 9.1 Change success ratio of 14 9.2 modify the impact of localized 15 Verifiability 10 15 10.1 Automatic verification of 15 16 10.2 Restart of tests 10.3 maintain the integrity of 16 Appendix A (informative) sample code analysis 17 References 19

Foreword

GB/T 29834 in the "System and software maintenance" of the general heading, divided into the following three parts. --- Part 1. Index System; --- Part 2. Measurement Methods; --- Part 3. Test methods. This section GB/T 29834 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This section is drafted. Shanghai computer software technology development center, China Electronics Standardization Institute, Shenzhen City in the letter Information Technology Co., Ltd., Beijing University of Posts and Telecommunications, Shanghai Pudong Software platform Ltd., Shanghai Baoxin Software Co., Ltd., Shanghai Lu Qixin interest Technology Co., Ltd. Liaoning North laboratories, Nanning square Software Technology Co., Ltd., Shanghai Electric Power Companies Communication center. The main drafters of this section. Cai Lizhi, Liu Zhenyu, Li Xiaoqing, Huang Yi, bears jade, Ben Cheung, Panguo Rui, Zhang Yang Yang, Yuan Yuyu, Li Jiahong, Zhanglu Ying, Cui Yan, Ding Zhigang, Xu Min, the Mao Rui, Wu Yujun, Hu Yun, Chen Dali, Chen Qiang.

Introduction

Since the flawed software delivery, user needs change, the environment changes, the software often requires maintenance, GB/T 8566- 2007 noted that software maintenance software life cycle has become an important part. GB/T 16260.1-2006 "Software Engineering production Product quality - Part 1. Quality model "includes software maintenance statements. This section GB/T 29834 with reference to GB/T 16260.1- 2006 Maintenance statements made maintenance testing methods. The development side, the demand side, the quality of managers and third-party evaluation agencies according to index System maintenance is defined quality requirements, evaluating software product maintenance, maintenance of measuring the quality of the case or for other purposes. This section applies to have Maintenance needs of all types of systems and software, does not apply to "single-use" or systems and software during use without change. The main users of this standard is expected to include. a) software suppliers, when. 1) to declare maintenance of software product characteristics; 2) maintenance control characteristics declared its own assessment of systems and software; 3) maintenance of software products related to the design and implementation time; 4) certificate of conformity for the maintenance or third-party evaluation agencies flags during testing; b) the potential demand-side when. 1) on the upcoming purchase of software products and maintenance requirements of existing products, when compared to descriptive information; 2) the need for product performance further improvement or improvement of products and potential errors made the necessary changes, the physical movement Differences line environment and procurement environment; 3) inspection of maintenance requirements is satisfied. GB/T 29834.1 "System and Software Maintenance - Part 1. Indicator System" gives the metric system maintenance, GB/T 29834.2 "systems and software maintenance - Part 2. Measurement method" gives access to maintenance indicators measure how the measured value method. This section is intended and GB/T 29834.1 and GB/T 29834.2 combination. Systems and software maintenance Part 3. Test methods

1 Scope

This section GB/T 29834 specifies the test method how to obtain maintenance index measurements. This section applies to all types of systems have maintenance requirements and software. Without this period does not apply to "single-use" or in use Systems and software changes. NOTE. The system referred to in this section are primarily software system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 11457 software engineering terminology Part 1 GB/T 29834.1 systems and software maintenance. Index System Part of GB/T 29834.2 systems and software maintenance 2. measurement methods

3 Terms and Definitions

Terms and definitions GB/T 11457 and GB/T 29834.1, as defined in this document apply.

4 Overview

GB/T 29834.2 defines the measure of system and software maintenance of this section for the measure in the relevant formulas given measure Test methods. Common maintenance test methods. expert evaluation method, test methods and technical user survey. All kinds of methods as follows. a) expert evaluation method --- a subjective evaluation method. When the assessment should be reviewed in accordance with the object and purpose of the assessment, design review project Table lists the scoring column, scores, weights, and scoring rules. N may be composed of a expert review group, according to its own expert Experience and knowledge, to judge scoring. Then, based on the weight and the weight of expert statistical rules, summary scores were calculated, the calculated The value as a result of the review. Scoring rules can be hierarchical, it can also be a range of values, or select one of the other Appropriate rules; b) Technical Test Method --- an objective evaluation method. When testing technology, can be based on the measured object and purpose of the test, opt Suitable for automated testing tools, but also by doing manual testing. The results obtained in testing technology is usually an amount Of the measurement results; c) User survey questionnaire sought --- one kind of method for specific user groups. When a user survey should be based on the purpose and special investigations Given user group, design the questionnaire, so that respondents fill in and feedback, the number of recovered questionnaire should reach a certain number, not Less than the appropriate proportion of the number issued. Then, the collected questionnaires aggregate calculations, the calculated value as a user survey the result of. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29834.3-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29834.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29834.3-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29834.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.