GB/T 29719-2013 English PDFUS$534.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29719-2013: Rolling bearings -- Linear motion rolling bearings -- Vocabulary Status: Valid
Basic dataStandard ID: GB/T 29719-2013 (GB/T29719-2013)Description (Translated English): Rolling bearings -- Linear motion rolling bearings -- Vocabulary Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J11 Classification of International Standard: 21.100.20 Word Count Estimation: 27,258 Adopted Standard: ISO 24393-2008, IDT Regulation (derived from): National Standards Bulletin No. 19 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms linear guidance systems, linear motion rolling bearings and related components, parts, accessories and technical fields. This standard applies to linear motion rolling bearings. GB/T 29719-2013: Rolling bearings -- Linear motion rolling bearings -- Vocabulary---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rolling bearings. Linear motion rolling bearings. Vocabulary ICS 21.100.20 J11 National Standards of People's Republic of China Rolling Linear motion rolling bearings Glossary (ISO 24393.2008, IDT) Issued on. 2013-09-18 2014-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Principle 1 3 Terms and definitions 2 4 Graphics 10 Appendix A (informative) Linear motion rolling bearings classified 17 References 18 Index 19ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 24393.2008 "Rolling Linear motion rolling bearings vocabulary." This standard also made the following editorial changes. --- Remove the International Standard Text in the French text; --- Increased and title Chapter 3, Chapter 4 reg number; --- Increased Chinese index. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of Rolling (SAC/TC98) centralized. This standard was drafted. Luoyang Bearing Science & Technology Co., Ltd., Luoyang Bearing Research Institute Co., Ltd. The main drafters of this standard. Li snow, Masu Qing.IntroductionISO 5593 [1] provides only for the term three linear motion rolling bearings field. But in recent years, many manufacturers have developed and produced Various types of linear motion rolling bearings and linear guidance systems. Therefore, the early development of this standard is intended to be able to unify and clear linear guide systems, linear motion rolling bearings, components, parts, accessories and The name of technology. Rolling Linear motion rolling bearings Glossary1 ScopeThis standard specifies the terms linear guide systems, linear motion rolling bearings and related components, parts, accessories and art. This standard applies to linear motion rolling bearings.2 Principles2.1 General This standard follows the ISO 10241 [2] principles and rules, "the vocabulary of architecture" to "alphabetical index of the structure" clause elaborate. 2.2 Lexical Structure Words include. a) terms and their definitions, arranged according to the sequence number system; b) index numbers and graphics-related terms; c) glossary and index numbers in alphabetical order. Structure 2.3 Terms and definitions Terms and definitions into groups and subgroups, according to the system sequence number order. Each group consists of two-digit sequential number, for 01 to boot the system from the start. Each group was divided into sub-groups, each sub-group composed by a four-digit sequence number, the first two digits of their group number. Each entry consists of a six-digit index number, for the first four digits of its sub-group number. 2.4 Structure of entry Each entry includes an index number, terms and their definitions may also include notes and (or) picture number references. Index number and terms printed in bold. Some entries in the term after the qualifier qualifier in normal font printed in angle brackets < > in the table Definitions of terms illustrates the scope of use or for special purposes. 2.5 Use blackbody When defining or injection printed in bold terms that appear in the definition of other entries in the vocabulary, it is only the first occurrence of each entry. When using printed in bold. Each such terms and the corresponding entry in the index number of the letters included in the index are used in bold print. Structure 2.6 graphics Arranged in order of terms it represents the graphic principle. Each graphical representation generally linear motion rolling bearings, components or parts of a plurality of models existing examples, including related terms The index number. In most cases, the graphics is simplified, eliminating unnecessary details. 2.7 alphabetical index structure Alphabetical index includes all terms and entries in the corresponding index number. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29719-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29719-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29719-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29719-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
