GB/T 29266-2012 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29266-2012: Radio frequency identification. 13.56MHz Tag basic electrical characteristics Status: Valid
Basic dataStandard ID: GB/T 29266-2012 (GB/T29266-2012)Description (Translated English): Radio frequency identification. 13.56MHz Tag basic electrical characteristics Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L64 Classification of International Standard: 35.240 Word Count Estimation: 7,768 Quoted Standard: GB/T 22351.2; ISO/IEC 14443-2 Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the 13. 56 MHz radio frequency identification tag (hereinafter referred to as labels) of the basic electrical characteristics. This standard applies to 13. 56 MHz tag design and production. GB/T 29266-2012: Radio frequency identification. 13.56MHz Tag basic electrical characteristics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Radio frequency identification. 13.56MHz Tag basic electrical characteristics ICS 35.240 L64 National Standards of People's Republic of China 13.56MHz RFID tag basic electrical characteristics Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents. This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This standard was drafted. China Electronics Standardization Institute, China Association for Automatic Identification Technology, Power Smart Card Co., Ltd., ZTE Corporation, Housing and Urban-Rural Construction IC card application service center, postal Sciences Planning Institute, Shenzhen, Yuanwang Valley letters Information Technology Co., Ltd., Shanghai Huahong Integrated Circuit Co., Ltd., Shanghai Hua Shenzhi card applications can Ltd. Shenzhen A Yifu Communication Co., Ltd., ZTE long day Information Technology Co., Ltd., Beijing Hua Tai Electronic Design Co., Ltd., Motorola (China) Power Limited child. The main drafters of this standard. gold Qian, Gao Lin, Xie Ying, Feng Jing, Geng force, Wang Wenfeng, Li Yuan, Zhang Peng. 13.56MHz RFID tag basic electrical characteristics1 ScopeThis standard specifies the 13.56MHz radio frequency identification tag (hereinafter referred to as labels) of the basic electrical characteristics. This standard applies to 13.56MHz label design and production.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 22351.2 Identification cards - Contactless integrated circuit cards Proximity cards - Part 2. Air Interface and Initialization (GB/T 22351.2-2010, ISO /IEC 15693-2.2000, IDT) ISO /IEC 14443-2 Identification cards - Contactless integrated circuit cards Proximity cards - Part 2. Radio frequency power and signal interface (Identificationcards-Contactlessintegratedcircuitcards-Proximitycards-Part 2. Radiofrequency powerandsignalinterface)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Data Hold Time dataretentiontime The data holding time is not lost in the tag. 3.2 Storage capacity memorycapacity Apply the label used in the internal memory of the number may be provided, in bytes or bits to represent logic. 3.3 Read-only tag read-onlytag You can not read data from and write tag data, that data can not change the label. 3.4 Read the label read-writetag Data can be repeatedly modified tag that data can be written to many times also repeatedly read labels.4 air interfaceTag air interface characteristics shall comply with ISO /IEC 14443-2 or GB/T 22351.2 of.5 field workLabels should be able to continuously work under the scope of the work of the field strength or signal strength range. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29266-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29266-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29266-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29266-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
