GB/T 28811-2012 English PDFUS$879.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28811-2012: High-voltage switchgear and controlgear -- Digital interfaces based on IEC 61850 Status: Valid
Basic dataStandard ID: GB/T 28811-2012 (GB/T28811-2012)Description (Translated English): High-voltage switchgear and controlgear -- Digital interfaces based on IEC 61850 Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K43 Classification of International Standard: 29.130.10 Word Count Estimation: 40,456 Quoted Standard: GB/T 2900.13-2008; GB 3804-2004; GB/T 7424.1; GB/T 7424.2; GB/T 7424.3; GB/T 7424.4; GB/T 7424.5; GB/T 9387.1-1998; GB/T 11022; GB/T 11594-2009; GB/T 14810-1993; GB/T 15629.3-1995; GB/T 17463-1998; GB/T 28810-2012; IEC 60874-10-3-1998; IEC 61850-1-2003; I Adopted Standard: IEC 62271-3-2006, MOD Regulation (derived from): National Standards Bulletin 2012 No. 28 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the high-voltage switchgear and control equipment as well as their composition and substation equipment and other parts of digital communications equipment and testing requirements on them. The digital communication device can repl GB/T 28811-2012: High-voltage switchgear and controlgear -- Digital interfaces based on IEC 61850---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.High-voltage switchgear and controlgear. Digital interfaces based on IEC 61850 ICS 29.130.10 K43 National Standards of People's Republic of China High-voltage switchgear and control equipment Digital interface based on IEC 61850 DigitalinterfacesbasedonIEC 61850 (IEC 62271-3.2006, MOD) Issued on. 2012-11-05 2013-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 3 4 Normal and special conditions of 5 5 6 ratings and classification Logical nodes 5.1 high voltage substation process level (LN) 6 Additional data and logic switching device node 5.2 Monitoring (LN) 6 5.3 Communication Service 7 5.4 Time requirements 12 5.5 data resolution and accuracy of 15 rated for 15 5.6 Data Security 5.7 Data Integrity 15 5.8 Performance Requirements 16 6 Design and Structure 16 6.1 Overview 16 6.2 Technical scope 21 6.3 Mechanical requirements 23 6.4 Electrical requirements 24 6.5 Electromagnetic compatibility (EMC) 24 6.6 Electronic nameplate 24 7 type tests 24 7.1 Overview 24 7.2 Communication Interface conformance testing switchgear 24 Measurement time 7.3 Switchgear 24 8 Routine tests 27 8.1 Overview 27 Measurement time 8.2 Switchgear 28 9 Inquire information, tenders, orders should be given 28 10 transport, storage, installation, operation and maintenance of Rule 28 11 Safety 28 (Normative) Test summary table in Appendix A 29 Appendix B (normative) for the logic node sensors and monitoring 30 Annex C (normative) Electronic nameplate 33ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This revised standard adopts IEC 62271-3.2006 "high-voltage switchgear and control equipment Part 3. IEC 61850 is based on digital interface". This standard and IEC 62271-3.2006 The main differences are. --- Range "NOTE 2", "For the range of the rated voltage ≤52.5kV," according to our conditions "for the rated voltage ≤40.5kV within range "; --- Terms and definitions of the sequence number had been changed since the original definition of the term before (3.7) was quoted on it use. This standard IEC 62271-3 in 3.8IED to 3.1 IEDs, the original number by 3.1 to 3.7 Delay times; --- Appendix A, the "basic standard test is the current IEC 62271 series of standards" to "basic standards test is current Related series of standards, "because according to our conditions, IEC 62271 series does not necessarily correspond to a national standard series; --- Appendix C, Table C.3 after the injection is AC_DLN_M notes, in fact, that content first appeared in Table C.1, so The move to the Note after table C.1. The standard proposed by China Electrical Equipment Industrial Association. This standard by the national high-voltage switch equipment Standardization Technical Committee (SAC/TC65) centralized. This standard is drafted by. Xi'an High Voltage Apparatus Research Institute Co., Ltd. Participated in the drafting of this standard. Xi'an Electric Automation Control System Co., Ltd. Jinhua power switch, Sunrise Group Ltd., Xuchang Cape Electrical Testing Institute, Nanjing Sunning photoelectric Automation Co., Ltd. Shanghai Siemens High Voltage Switchgear Co., Ltd., South Beijing NARI-RELAYS Electric Co., Ltd., Zhejiang Huayi Electric Power Automation Co., Ltd., Beijing Career Distribution Automation Co., Ltd., Wuhan Wuchang Electric Control Equipment Co., Ltd., New Northeast Electric (Shenyang) High Voltage Switchgear Co., Ltd., ABB (China) Co., Ltd. Pressure Technology Center, West Anxi high-voltage electrical Co., Ltd., Henan high level of electrical Co., Ltd., Tianjin three Power Equipment Manufacturing Co., Ltd., Tianshui Changcheng Switchgear Factory Co., Ltd., ABB (China) Ltd The Group research center. The main drafters of this standard. Tour Yimin, Mu Jing Wei, Xue Ye, Tian Enwen, Zhang real. Participate drafters of this standard. Leiying, any steady column, Daidong Yun, Feng Jianhua, Zhang Hang, Zhang Lei, Lourdes silver, European army, Lin Aimin, HE Chun, Tanghan Song, Sun Bo, shall be mine, THE ACADEMY, Yuan Chin Cheng, Shen Xiang Yu, Li Zhigang, Fu Haiming, Wang Jun, Zhou Hua, Chen, Yin Junhua, Peng Xing, Gu Deming, Li Ju red, Wang Zhao, Wang Kai thereof. High-voltage switchgear and control equipment Digital interface based on IEC 618501 ScopeThis standard specifies the rest of the high-voltage switchgear and control equipment as well as their equipment and substations constructed and digitally through Letters and special equipment for their testing requirements. The digital communication device can instead of metal wires in parallel and can be integrated into high-voltage switchgear And control equipment and complete sets of equipment, can be used as an external device so that the existing switchgear, control equipment and complete sets of equipment and IEC 61850 compatible. This standard applies to the IEC 61850 series of product standards. It is used to deal with a serial communication interface with the follow IEC 61850 standard Switchgear, control equipment and relevant parts of the equipment. In particular, it defines. a) in accordance with IEC 61850 information model to support selection switchgear, control equipment and complete sets of equipment; b) switching equipment, control equipment, and equipment for package of communication services should support the consistency of classification; c) type test and routine testing switchgear, control equipment and complete sets of equipment modifications and extensions should be based on serial communication interface Requirements; d) To achieve the switching equipment on-line monitoring of the IEC 61850 object model carried expansion. Note 1. The purpose is to allow the improved object model IEC switchgear-line monitoring device 61850 and IEC 61850 for future developments coincide, when After both the organic integration of the relevant parts be removed from the standard. This standard is based on IEC 61850. Used for high voltage switchgear, control equipment and complete sets of equipment of digital communications equipment made specific Requirements and related test requirements. Related switchgear standard plus in this standard supplement widely applicable technical requirements. Note 2. For the range of the rated voltage ≤40.5kV, and now there is little interface with digital switching equipment. This is usually not integrated digital switching equipment through Communication interface, if you want to develop such products, the basis having this standard. Note 3. The communication interface standard designed to improve interoperability. Since there is no interchangeability requirements, which are not present interchangeability standards and the IEC 61850 standard norm Enclosed within. Note 4. For substation communications and related terms, definitions and models usually refer to IEC 61850 series of standards and requirements outlined goals. IEC 61850-1. Modeling See IEC 61850-7-1.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050-191.1990, IDT) GB 3804-2004 3.6kV ~ 40.5kV high voltage AC load switch (IEC 60265-1.1998, MOD) GB/T 7424 (all parts) total cable specification (IEC 60794 (all parts)) GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (idt ISO / IEC 7498-1.1994) GB/T 11022 high-voltage switchgear and control equipment standard common technical requirements (GB/T 11022-2011, IEC 62271-1. 2007, MOD) GB/T 11594-2009 public data networks of data terminal equipment (DTE) and data circuit terminating swap power equipment (DCE) between Road Definition Table (ITU-TV.24.2000, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28811-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28811-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28811-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28811-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
