GB/T 28810-2012 English PDFUS$689.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28810-2012: High-voltage switchgear and controlgear -- The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear Status: Valid
Basic dataStandard ID: GB/T 28810-2012 (GB/T28810-2012)Description (Translated English): High-voltage switchgear and controlgear -- The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K43 Classification of International Standard: 29.130.10 Word Count Estimation: 30,359 Quoted Standard: GB/T 2900.13-2008; GB/T 2900.56-2008; GB/T 3805-2008; GB/T 5080.1-1986; GB/T 5080.2-1986; GB/T 5080.4-1985; GB/T 5080.5-1985; GB/T 5080.6-1996; GB 7288.1; GB 7288.2; GB/T 7289-1987; GB/T 11022-2011; GB/T 14733.5-1993; GB/T 17045-2008; IEC 61000-5-1-1996; Adopted Standard: IEC 62063-1999, MOD Regulation (derived from): National Standards Bulletin 2012 No. 28 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies requirements for high-voltage switchgear and control equipment associated with the introduction of national standards for advanced technology, the basic guidelines, requiring these advanced technology allows users to switch the dev GB/T 28810-2012: High-voltage switchgear and controlgear -- The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. High-voltage switchgear and controlgear.The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear ICS 29.130.10 K43 National Standards of People's Republic of China High-voltage switchgear and control equipment and electronic Related technology in switchgear and control equipment Auxiliary equipment application (IEC 62063.1999, MOD) Issued on. 2012-11-05 2013-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 2 3 Terms and definitions 2 4 Design and Structure 5 4.1 Overview 5 4.2 System structure 6 4.3 transmitters and actuators 11 Control 13 4.4 4.5 Monitoring 13 4.6 interfaces and connections 14 5 substation recommended new technology 16 5.1 Installation 16 5.2 transmitters and actuators 16 17 5.3 Insulation aspect 5.4 Security and Privacy 17 5.5 connector degree of protection 17 5.6 Maintenance 18 6 Standard reform proposals 18 Changes lead to the introduction of new technology of 6.1 18 Changes introduced in 6.2 standard fieldbus result 19 (Normative) trends switchgear and control equipment applications Appendix A 20 References 26ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This revised standard adopts IEC 62063.1999 "high-voltage switchgear and control equipment, electronic and related technologies in the switchgear and control Auxiliary equipment manufacturing equipment in the application. " This standard and IEC 62063.1999 are the main differences. --- The IEC 62063.1999 in Part 4 "switch and control equipment, application trends" as the appendix; --- The IEC 62063.1999 in Part 5, "Technology Trends" to "design and structure"; --- Added "if necessary, intelligent electronic devices in switchgear and high-voltage switching devices together with associated test"; --- Added "interface standard high-voltage switchgear and control equipment, see GB/T 28811 (IEC 62271-3)"; --- Ideal switching device to increase the basic functions of an example. Action counters and SF6 density monitoring; --- Non-ideal switching device to remove the basic functions Example. Action counters and SF6 gas density monitoring the pole creepage distance more Instead insulated; --- Remove the Fieldbus constraints; --- Maintenance of trend removed. additional factors on financial constraints and lack of expertise of personnel; --- In industrial applications section of the transmitter clear Transmitters for pressure and temperature in parentheses hydraulic fluid to the hydraulic mechanism; --- Delete content on the 7.2 "TC57 has begun drafting criteria for the interface areas". The standard proposed by China Electrical Equipment Industrial Association. This standard by the national high-voltage switch equipment Standardization Technical Committee (SAC/TC65) centralized. This standard is drafted by. Xi'an High Voltage Apparatus Research Institute Co., Ltd. Participated in the drafting of this standard. Xi'an Electric Automation Control System Co., Ltd. Jinhua power switch, Sunrise Group Ltd., Xuchang Cape Electrical Testing Institute, Nanjing Sunning photoelectric Automation Co., Ltd. Shanghai Siemens High Voltage Switchgear Co., Ltd., South Beijing NARI-RELAYS Electric Co., Ltd., Zhejiang Huayi Electric Power Automation Co., Ltd., Beijing Career Distribution Automation Co., Ltd., Wuhan Wuchang Electric Control Equipment Co., Ltd., New Northeast Electric (Shenyang) High Voltage Switchgear Co., Ltd., ABB (China) Co., Ltd. Pressure Technology Center, West Anxi high-voltage electrical Co., Ltd., Henan high level of electrical Co., Ltd., Tianjin three Power Equipment Manufacturing Co., Ltd., Tianshui Changcheng Switchgear Factory Co., Ltd., ABB (China) Ltd The Group research center. The main drafters of this standard. Tour Yimin, Lei Ying, Xue Ye, Tian Enwen, Zhang real. Participate drafters of this standard. any stable pillar, Jun Yong Road, Mu Jing Wei, Feng Jianhua, Daidong Yun, Zhang Hang, Zhang Lei, Lourdes silver, European army, Lin Aimin, He Chun, Tanghan Song, Sun Bo, shall be mine, THE ACADEMY, Yuan Chin Cheng, Shen Xiang Yu, Li Zhigang, Fu Haiming, Wang Jun, Zhou Hua, Chen, Yin Junhua, Peng Xing, Gude Ming, Li Ju Hung, Wang Zhao, Wang Kai thereof. High-voltage switchgear and control equipment and electronic Related technology in switchgear and control equipment Auxiliary equipment application1 Scope1.1 Scope and objectives This standard provides for high-voltage switchgear and control equipment relevant national standards to introduce advanced technology, the basic guidelines. These requirements Advanced technology allows users to switch the device to obtain the maximum benefits from the electronic device. This standard defines the technology allows all associated with the switching and control equipment, auxiliary equipment or part of an electronic device. The standard Registration introduced new provisions is to cover these technologies. It also defines the functions should ensure different levels, and the corresponding definition of Article Member, it will. --- To provide users with the selected technology-independent operational safety assurance. This requires, for example, in the case of the transmitter case, there should be Involving accuracy, response time terms, testability and so on. --- Allow the manufacturers through their own unique features technical assurance requirements. You can choose to use or not to use optical fiber, digital Connection or traditional connection communication networks. --- If necessary, intelligent electronic devices in switchgear and high-voltage switching devices together with associated test. --- Interface standard voltage switchgear and control equipment, see GB/T 28811. 1.2 new concept Switching equipment from two aspects to consider. --- A device that is part of the high-voltage switching equipment for high voltage insulation, the carrier and the opening and closing; --- Auxiliary equipment that is part of the low-voltage switchgear, used to control and monitor the main element. Using conventional techniques, usually two parts by a switching device provided by the manufacturer, which is the usual boundaries of the terminal block. The use of electronic technology to cause significant changes in the following areas. --- Position of the auxiliary equipment is not necessarily limited to the corresponding switch devices, and can be placed in any location, local control from the switching device Substation cabinet to the control room. A demarcation devices and auxiliary equipment is no longer a position close to the local control cabinet physically. Different elements --- auxiliary equipment can be provided by a different manufacturer. --- Use of electronic technology of distributed architecture, components and microprocessor-based digital communications introduces a new concept in terms of credibility. This will lead to changes in maintenance procedures switching device and the user operates. Then, in case of failure inside the substation, there have been division of responsibilities. The standard recommendation of the relevant criteria repair Change to clarify a responsibility for equipment and auxiliary equipment among manufacturers. 1.3 This standard configuration This standard consists of three parts. Part 1 (Chapters 1 - 3) tells the scope of this standard, the reference standard definitions and terminology; (Chapter 4) Part 2 focuses on the system System design, installation, testing and other aspects of technology and results; Part 3 (Chapter 5, Chapter 6) recommended use of new technologies in a number of substations Standards and recommendations for appropriate changes to adapt to the new situation. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28810-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28810-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28810-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28810-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
