GB/T 28799.2-2020 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28799.2-2020: (Heat-resistant polyethylene (PE-RT) piping system for hot and cold water - Part 2: Pipes) Status: Valid GB/T 28799.2: Historical versions
Basic dataStandard ID: GB/T 28799.2-2020 (GB/T28799.2-2020)Description (Translated English): (Heat-resistant polyethylene (PE-RT) piping system for hot and cold water - Part 2: Pipes) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G33 Word Count Estimation: 19,167 Date of Issue: 2020-11-19 Date of Implementation: 2021-06-01 Older Standard (superseded by this standard): GB/T 28799.2-2012 Regulation (derived from): National Standard Announcement No. 26 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 28799.2-2020: (Heat-resistant polyethylene (PE-RT) piping system for hot and cold water - Part 2: Pipes)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Heat-resistant polyethylene (PE-RT) piping system for hot and cold water-Part 2.Pipes) ICS 83.140.30 G33 National Standards of People's Republic of China Replace GB/T 28799.2-2012 Heat-resistant polyethylene (PE-RT) piping system for hot and cold water Part 2.Tubing Released on 2020-11-19 Implemented on 2021-06-01 State Administration for Market Regulation Issued by the National Standardization Management Committee ForewordGB/T 28799 "Heat-resistant Polyethylene (PE-RT) Piping System for Hot and Cold Water" is divided into the following parts. ---Part 1.General Provisions; ---Part 2.Pipes; ---Part 3.Pipe fittings; ---Part 5.System applicability. This part is Part 2 of GB/T 28799. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 28799.2-2012 "Heat-resistant polyethylene (PE-RT) piping system for cold and hot water-Part 2.Pipes", and Compared with GB/T 28799.2-2012, the main technical changes are as follows. ---Modified the scope of application of the piping system (see Chapter 1, Chapter 1 of the.2012 edition); --- Added a trade "note" (see Chapter 1); ---Relevant normative references have been revised (see Chapter 2, Chapter 2 of the.2012 edition); --- Added "Terms, Definitions, Symbols and Abbreviations" (see Chapter 3); ---Modified the material regulations (see Chapter 4, Chapter 3 of the.2012 edition); ---Modified product classification (see Chapter 5, Chapter 4 of the.2012 edition); ---Modified the selection of tube series S (see Chapter 6, Chapter 4 of the.2012 edition); ---Modified the color regulations (see 7.1, 5.1 of the.2012 edition); ---Expanded the outer diameter size range of the pipe (see Table 3, Table 3 of the.2012 edition); ---Modified the wall thickness allowable deviation table (see Table 4,.2012 edition of Table 4); ---Added the regulation of pipe length (see 7.3.3); ---Increase the ash content, oxidation induction time of the pipe and the oxidation induction time and pigment content after the 95℃/1000h hydrostatic test The requirements for dispersion and slow crack growth resistance have been modified to express the requirements for oxygen permeability (see Table 6,.2012 edition of Table 6); ---Adjust the system applicability into a separate chapter, and delete the specific content of the system applicability requirements (see Chapter 8,.2012 edition of 5.7); ---Modified the test method (see Chapter 9, Chapter 6 of the.2012 edition); ---Modified the group batch (see 10.2.1, 7.2.1 of the.2012 edition); ---Modified the grouping (see 10.2.2, 7.2.2 of the.2012 edition); ---Modified the requirements for type inspection (see 10.3, 7.3 of the.2012 edition); ---Modified the item requirements of factory inspection (see 10.4.1, 7.4.1 of.2012 edition); ---Modified the batch range of the sampling plan (see 10.4.2, 7.4.2 of the.2012 edition); ---Modified the requirements for type inspection (see 10.5, 7.5 in the.2012 edition); ---Modified the judgment rules (see 10.6,.2012 edition of 7.6); ---Modified the content of the logo (see 11.1, 8.1 in the.2012 edition); ---Amended the content of Appendix A, and changed "Calculation of allowable working pressure of pipes" to "Derivation of calculated value of maximum pipe series" (see Appendix A, Appendix A of the.2012 edition). This part uses the redrafting method to refer to ISO 22391-2.2009 "Heat-resistant Polyethylene (PE-RT) for Plastic Piping Systems for Cold and Hot Water" Part 2.Pipes", the degree of consistency with ISO 22391-2.2009 is not equivalent. Please note that some contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the China National Light Industry Council. This part is under the jurisdiction of the National Plastic Products Standardization Technical Committee (SAC/TC48). Drafting organizations of this section. Yonggao Co., Ltd., Shanghai Baidie Pipe Industry Technology Co., Ltd., Zibo Jielin Plastic Pipe Co., Ltd. Company, Chengdu Chuanlu Plastic Group Co., Ltd., Baolu Qixing Pipe Industry Co., Ltd., Rifeng Enterprise Group Co., Ltd., Zhejiang Weixing New Building Materials Co., Ltd. Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., Wuhan Jinniu Economic Development Co., Ltd., Akcome Enterprise Group (Shanghai) Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd., Hongyue Plastic Group Co., Ltd., Ningxia Qinglong Plastic Pipe Co., Ltd., Hebei Shengli Plastic Industry Co., Ltd., Total Petrochemical (Shanghai) Co., Ltd., Beijing Building Materials Inspection and Research Institute Co., Ltd. The main drafters of this section. Huang Jian, Chai Gang, Xie Jianling, Jia Lirong, Xu Hongyue, Wang Lei, Li Dazhi, Li Tongyi, Liu Feng, Qiu Qiang, Wang Baiti, The motherland is rich, Li Yongfeng, Gu Hongqiang, Ke Jinling, Li Yanjun, Sun Huali. The previous versions of the standards replaced by this part are as follows. ---GB/T 28799.2-2012. Heat-resistant polyethylene (PE-RT) piping system for hot and cold water Part 2.Tubing1 ScopeThis part of GB/T 28799 specifies the terms, definitions, symbols and abbreviations of heat-resistant polyethylene (PE-RT) pipes (hereinafter referred to as "pipes") Abbreviations, materials, product classification, selection of tube series S, requirements, system applicability, test methods, inspection rules, signs, packaging, transportation and Store. This part, together with other parts of GB/T 28799, is applicable to cold and hot water piping systems, including cold and hot water, drinking water for civil and industrial buildings. Water and heating system, hot spring pipeline system and central heating secondary pipe network system, etc. This section applies to PE-RTⅠ and PE-RTⅡ pipes. The PE-RTⅠ pipes in this section are not suitable for hot spring piping systems and central heating secondary pipe network systems. Note. It is the responsibility of the purchaser to select this product appropriately according to its specific application requirements, combined with relevant regulations, standards or specifications.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GB/T 2828.1 Sampling inspection procedure by attributes Part 1.Batch inspection sampling plan retrieved by acceptance quality limit (AQL) (GB/T 2828.1-2012, ISO 2859-1.1999, IDT) GB/T 2918 Standard environment for condition adjustment and testing of plastic specimens (GB/T 2918-2018, ISO 291.2008, MOD) GB/T 3682.1 Plastic thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR) measurement Part 1.Standard Method (GB/T 3682.1-2018, ISO 1133-1.2011, MOD) GB/T 6111-2018 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation GB/T 6671 Thermoplastic pipe longitudinal shrinkage determination (GB/T 6671-2001, eqvISO 2505.1994) GB/T 8806 Plastic piping system plastic parts size determination (GB/T 8806-2008, ISO 3126.2005, IDT) GB/T 9345.1 Determination of Ash in Plastics Part 1.General Method (GB/T 9345.1-2008, ISO 3451-1.1997, IDT) GB/T 17219 Safety evaluation standard for drinking water distribution equipment and protective materials GB/T 18251 Determination of pigment or carbon black dispersion in polyolefin pipes, pipe fittings and mixtures (GB/T 18251-2019, ISO 18553.2002, MOD) GB/T 18476 Polyolefin pipes for fluid transport-Determination of resistance to crack growth. Test method for slow crack growth (notch test Test) (GB/T 18476-2019, ISO 13479.2009, MOD) GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves GB/T 19466.6 Plastic Differential Scanning Calorimetry (DSC) Part 6.Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Determination of temperature (dynamic OIT) (GB/T 19466.6-2009, ISO 11357-6.2008, MOD) GB/T 21300 Determination of the opacity of plastic pipes and fittings (GB/T 21300-2007, ISO 7686.2005, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28799.2-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 28799.2-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28799.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28799.2-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 28799.2-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28799.2-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
