GB/T 28036-2011 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28036-2011: Information processing -- Character structure for start/stop and synchronous character oriented transmission
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28036-2011	114	Add to Cart	3 days	Information processing -- Character structure for start/stop and synchronous character oriented transmission	Valid

Similar standards

CJ/T 188   GB/T 25315   YDC 079   GB/T 45279.1   GB/T 45279.2   GB/T 45278.1   

Basic data

Standard ID: GB/T 28036-2011 (GB/T28036-2011)
Description (Translated English): Information processing -- Character structure for start/stop and synchronous character oriented transmission
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L78
Classification of International Standard: 35.100.20
Word Count Estimation: 6,699
Date of Issue: 2011-10-31
Date of Implementation: 2012-02-01
Quoted Standard: GB/T 2311; GB/T 11383; ISO/IEC 646-1991; ISO 2047-1975
Adopted Standard: ISO 1177-1985, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides for the use of the theme as IS0 646 bit coded character set, GB/T 11383 topics Octet Coded Character Set and as GB/T 2311 on the above theme coded character set extension and ending at bit-serial and synchronous data transmission system character structure. This standard also specifies the coded character set with seven parity used with readout. This standard applies to the relevant CCITT V and X series recommendations defined by the data terminal equipment DTE and DCE Data Circuit- terminating equipment connected by CCITT and ISO/IEC standardized interface information to be transmitted.

GB/T 28036-2011: Information processing -- Character structure for start/stop and synchronous character oriented transmission

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information processing. Character structure for start/stop and synchronous character oriented transmission ICS 35.100.20 L78 National Standards of People's Republic of China Information processing for start-stop characters and the synchronous transmission Character Structure (ISO 1177. 1985, IDT) Issued on. 2011-10-31 2012-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is based on GB/T 1.1-2009 given rule drafting. This standard is identical with ISO 1177. 1985 "Information processing and synchronization for start-stop character transmission character structure." Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This standard was drafted. China Electronics Standardization Institute. The main drafters of this standard. Yang Hong, Zhuolan, Cong, Zhang Hui. Information processing for start-stop characters and the synchronous transmission Character Structure

1 Scope

The standard provides for the use of ISO 646 as the theme of the bit coded character set, GB/T 11383 theme Octet Coded Character Character sets and as GB/T 2311 relating to the above coded character set extension bit and start-stop synchronous serial data transmission system structure. This standard also specifies the parity and bit coded character set for use with read out. This standard applies to the relevant X-Series Recommendations and CCITTV defined by DTE data terminal equipment and data circuit terminating DCE interface information between devices to transmit standardized by CCITT and ISO /IEC .

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2311 Information technology - Character code structure and extension techniques (GB/T 2311-2000, ISO /IEC 2022.1994, IDT) GB/T 11383 Information processing bit code for information interchange - Structure and rules (GB/T 11383-1989, ISO 4873. 1986, IDT) ISO /IEC 646.1991 Information technology - Information interchange ISO bit coded character set (Informationtechnology- ISO 7-bitcodedcharactersetforinformationinterchange) ISO 2047. 1975 Information processing bit coded character set of graphical representation of control characters (Informationprocessing- Graphicalrepresentationsforthecontrolcharactersofthe7-bitcodedcharacterset) 3 Sort --- start-stop and synchronous operation In the work of a serial data transmission system, the transmission bit timing information should correspond with any of the following circumstances. a) according to ISO 646-bit identification code table seven defined b1 to b7 to the least significant bit is transmitted first; or b) according to GB/T 11383 eight-bit code table defined identification b1 to b8 to the least significant bit is transmitted first. When the combination of the order to represent binary numbers bit order when you should use low-level priority serial transmission. When corresponding to each bit of information to be considered in isolation, meaning its value is. A 0 indicates the state of the unit (Travail = Space), and

1 shows a state Z unit

(Repos = Mark), They and two state of the transmission system in a state consistent with the definition. 4 parity bit and start-stop synchronous operation --- When seven working parity bits should be applied to each character, and should be located in the eighth position, and therefore significant bit of the character 7 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28036-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28036-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28036-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28036-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.