GB/T 27830-2011 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27830-2011: Chemicals -- Test method of in vitro skin corrosion -- Human skin model test Status: Valid
Basic dataStandard ID: GB/T 27830-2011 (GB/T27830-2011)Description (Translated English): Chemicals -- Test method of in vitro skin corrosion -- Human skin model test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A80 Classification of International Standard: 13.300; 11.100 Word Count Estimation: 11,161 Date of Issue: 2011-12-30 Date of Implementation: 2012-08-01 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the chemical model of human skin in vitro skin corrosion test method terminology and definitions, test theory, test methods and data and reporting. This standard applies to chemical screening and detection of skin corrosion, skin corrosion chemicals as an alternative to animal testing methods. Toxicity tests can be used as part of combination with other tests for overall evaluation of toxic chemicals. GB/T 27830-2011: Chemicals -- Test method of in vitro skin corrosion -- Human skin model test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Chemicals. Test method of in vitro skin corrosion. Human skin model test ICS 13.300; 11.100 A80 National Standards of People's Republic of China Chemicals vitro skin corrosion Human skin model test method Issued on. 2011-12-30 2012-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The Standards and Organisation for Economic Co-operation and Development OECD Chemicals Test Guidelines No.431 (2004 Nian) "in vitro skin corrosion. human skin Model Test "(in English) is consistent technical content. The standard structure and made the following editorial changes. --- Increasing the range a chapter; --- The OECD431 original in the "Introduction" and "initial consideration" content as the introduction of this standard; --- The original OECD431 Appendix "definition" of the present standard "2 Terms and Definitions"; --- The original OECD431 in Table 2 of this standard as "Appendix A (informative)"; --- Change the unit of measure of legal units of measurement. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard was drafted. Chinese Center for Disease Prevention and Control of Occupational Health and Poison Control, Guangdong Exit Inspection and Quarantine, China seized Inspection and Quarantine Science Research Institute, China Chemical Technology Development Center. The main drafters of this standard. Liuqing Jun, Wang Xiaobing, Chi Ying, Cheng Shujun, Yang Ting, Xuchong Hui, Jiao Hong.IntroductionSkin corrosion refers to irreversible tissue damage skin after exposure to the test substance caused (according to GHS definitions [1] This standard provides a Species of live animals or animal tissue without skin corrosion evaluation methods. Skin corrosion evaluation usually requires the use of laboratory animals [2]. Taking into account the experimental animal suffering and injury, in 2002, OECD Test Guideline "acute chemical skin irritant and corrosive" (TG404) revision and in the annex are allowed for in vitro Generation skin corrosion test methods, to avoid animal suffering and injury. Of GB/T 21604-2008 is equivalent to using the method. 404 (or GB/T 21604-2008) the main difficulties in vivo skin corrosion test is the lack of formal guidelines completely replaced, independent In vitro test methods and authenticated. An alternative method of regulation in accordance with the purpose of alternative tests for skin corrosion, the first step needed Formal validation study validation studies [3] ago, followed by in vitro evaluation of skin corrosion test methods [4-5] conducted [6-8]. According to these studies The results and other published literature [9], we recommend the following tests to assess in vivo skin corrosion. human skin model test (see This standard) and percutaneous resistance test (see TG430) [10-13]. Validation studies show that the use of human skin model test can distinguish well known skin corrosives and non-corrosive to skin [3-5,9]. also Provide information to distinguish between serious and less serious skin resistance. Test methods described in this standard can identify corrosive chemical substances and mixtures. In combination with other existing information (eg pH, structure-activity Relations, human and/or animal data) [1-2,13-14], by weight of evidence analysis, this standard may be further identified non-corrosive substances and mixing Thereof. This standard does not provide enough information usually test substance skin irritation, nor according to the GHS system into the corrosive substances Step classification [1-2,13-14]. For a comprehensive evaluation of local skin reactions after a single dermal exposure, it is recommended according to GB/T 21604-2008 [2] and in order to provide GHS Column test policy program [1] experiment. Test sequences are included in the policy before considering the test live animals, the first in vitro skin corrosion (eg This standard) and skin irritation test. Chemicals vitro skin corrosion Human skin model test method1 ScopeThis standard specifies the terms and definitions chemical corrosion human skin in vitro skin model test method, the test principle, test methods and several According to the reports. This standard applies to chemical skin corrosion screening and detection, can be used as animal skin corrosion test alternative chemicals. But also as part of toxicity testing, in combination with other chemicals toxicity test for the overall rating.2 Terms and definitionsThe following terms and definitions apply to this document. 2.1 In vivo skin corrosion skincorrosioninvivo Skin contact with the test substance after 4h produce irreversible damage, necrosis appears visibility from the epidermis into the dermis. Corrosive effects special Levy. ulcers, bleeding, bloody scabs, 14d later manifested as skin atrophy discoloration, local alopecia areata and crusting and other changes. For suspicious skin damage Injury to histopathological examination. 2.2 Cell activity celviability Index measuring overall cell population viability [e.g. mitochondrial dehydrogenase reducing activity tetrazolium dye (3- (4,5-dimethyl-thiazol-2) - 2,5-diphenyl tetrazolium bromide, MTT) (CASNo.298-93-1) capacity], depending on the endpoint measured and the indicators used provided Meter program, and associated with the total number of cells and/or activity of a cell number.3 Test principleTest substance locally on a three-dimensional human skin model, the model used is at least one skin reconstruction containing a functional stratum corneum. According to a specific action at the time, the cell activity test substance (e.g. MTT reduction assay) [15] is reduced to the threshold level is set to identify rot Corrosion substances. Skin model test is based on the principle of human body after exposure to corrosive chemicals through the skin by diffusion or corrosive effect Through the stratum corneum, the assumption that produce cytotoxicity to the underlying cell layers. Test Method 4 4.1 Human skin model Human skin models can build your own or are commercially available [16-19] or by the developer preparation laboratory [20-21]. Make human skin Should meet with national and international ethical requirements. Any new skin model should be validated (at least meet the requirements of 4.3). The test Mortem human skin model used should meet the conditions set out in 4.2 and 4.3. General Conditions 4.2 Skin Model 4.2.1 human keratinocytes should be used to build the model of epithelial skin, the stratum corneum should contain the following functional multilayer active epithelial cells ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27830-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 27830-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27830-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27830-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
