GB/T 26789-2011 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26789-2011	RFQ	ASK	3 days	Product lifecycle management services specification	Valid

Similar standards

GB/T 38633   GB/T 38666   GB/T 38672   GB/T 45228   GB/T 45241   GB/T 45341   

Basic data

Standard ID: GB/T 26789-2011 (GB/T26789-2011)
Description (Translated English): Product lifecycle management services specification
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L67
Classification of International Standard: 35.240.50
Word Count Estimation: 313,388
Date of Issue: 2011-07-29
Date of Implementation: 2011-12-01
Quoted Standard: GB/T 15273.1; GB/T 16656.203; GB/T 17645.42; GB/T 19679; ISO 639-2; ISO 10303-214; ISO 3166-1; ISO 13584-501; ISO/IEC 646; ISO/IEC 6937; ISO/IEC 10646; ISO 13584-511; ISO 13584-101; ISO 13584-102; ISO 13584-1; ISO 13584-24; ISO 13584-20; ISO 13584-25; ISO 13584-26; ISO 13584-31; ISO 13584-32; ISO 13584-42
Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the product lifecycle management services platform-independent model (PIM) and a platform for the Web service implementation specific model (PSM). This standard applies to product lifecycle management Web service implementation.

GB/T 26789-2011: Product lifecycle management services specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Product lifecycle management services specification ICS 35.240.50 L67 National Standards of People's Republic of China Product Lifecycle Management Service Specification Issued on. 2011-07-29 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3.1 Terms and definitions 3.2 Abbreviations 2 Consistency 2 4 5 Use Case 3 5.1 Overview 3 5.2 Details Use Case 3 6 Information viewpoint PIM 50 6.1 PLM group package 52 6.2 Parts Identification packet 57 6.3 parts package structure 61 6.4 Document and File Management Pack 71 6.5 Definitions and transform the shape Pack 85 6.6 Classification pack 101 6.7 Feature Pack 109 6.8 alias identification packet 125 6.9 Power Packs 127 Configuration Management Pack 142 6.10 6.11 change and work management pack 170 6.12 process planning package 180 6.13 language support packages 189 7 calculates viewpoint 191 7.1 Overview 191 7.2 Calculation viewpoint base model 191 7.3 Public inquiry consistency point 202 7.4 General Query consistency point 203 7.5 XPath query consistency point 207 7.6 agent queries consistency point 207 7.7 for a particular query consistency point 209 7.8 PDTnet query consistency point 278 7.9 Message Queries consistency point 290 8 Web services platform-specific model 292 8.1 Overview 292 8.2 XML model UML profile - 292 8.3 application stereotype has information viewpoint 299 8.4 Calculation of having applied stereotype viewpoint 299 8.5 based on PLM Web service 305 service 8.6 query examples 307 8.7 Security Features 309 Appendix A (informative) mapping specification and PIM equivalent model 316 Appendix B (normative) applies to product lifecycle management services support information model of PIM and PSM 317 models References 318

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is based on the Object Management Group (OMG) standard dtc/07-05-01 "Product Lifecycle Management Service Specification" V2.0 making. Technical content is consistent with the OMG standard dtc/07-05-01. The main differences between standard and OMGdtc/07-05-01 follows. a) by deleting the OMG standard in dtc/07-05-01 Preface and Chapter 6; b) in the OMG standard dtc/07-05-01 "Terms and Definitions" and "symbol" merger-oriented standard "terms, definitions and abbreviations language"; c) The OMG standard dtc/07-05-01 of "Informative references" as the text of this standard references; d) In order to facilitate understanding, the entity name of this standard illustrations reserved English. The standard proposed by China Machinery Industry Federation. The standard automation systems and integration by the National Standardization Technical Committee (SAC/TC159) centralized. This standard is mainly drafted by. China National Institute of Standardization. The main drafters. Liwen Wu, Yang Qinghai, Hong Yan, Liu Shouhua, Wang Zhiqiang, Zhou Xin Hua, Zhan Junfeng. Product Lifecycle Management Service Specification

1 Scope

This standard specifies the platform-independent model of the product life-cycle management services (PIM) for the Web service implementation and platform-specific mode Type (PSM). This standard applies to product lifecycle management Web service implementation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 15273.1 information processing bit single-byte coded graphic character sets - Part 1. Latin alphabet a (ISO 8859-1) GB/T 16656.203 Industrial automation systems and integration - Product data representation and exchange Part 203. Application protocol. Configuration Control design (ISO 10303-203) Part 42 GB/T 17645.42 Industrial automation systems and integration Parts library. Description methodology. Methodology for structuring parts families method Science (ISO 13584-42) GB/T 19679 IT for Electrotechnical drafting and exchange of information coded graphic character sets (IEC 61286) ISO 639-2 language Code Name - Part 2. 3 letter code (Codesfortherepresentationofnamesoflan- guages-Part 2. Alpha-3code) ISO 3166-1 names of countries and their codes - Part 1. Country Codes (Codesfortherepresentationof namesofcountriesandtheirsubdivisions-Part 1. Countrycodes) ISO 10303-214 Industrial automation systems and integration - Product data representation and exchange Part 214. Application protocol. Automotive mechanic Core Data (Industrialautomationsystemsandintegration-Productdatarepresentation mechanical design process andexchange-Part 214. Applicationprotocol. Coredataforautomotivemechanicaldesignprocesses) ISO 13584 (all parts), Industrial automation systems and integration Parts library (Industrialautomationsystemsandinte- gration-Partslibrary) ISO /IEC 646 Technical information interchange ISO bit coded character set (Informationtechnology, ISO 7-bit codedcharactersetforinformationinterchange) ISO /IEC 6937 Information technology - Coded character sets for text communication - Latin alphabet (Informationtechnology-Coded graphiccharactersetfortextcommunication-Latinalphabet) ISO /IEC 10646 Information technology - Universal Multiple-Octet Coded Character Set (UCS) [Informationtechnology-Universal Multiple-OctetCodedCharacterSet (UCS)] 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this document. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26789-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26789-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26789-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26789-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.