GB/T 26743-2011 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26743-2011: Fiber reinforced composite bars for civil engineering Status: Valid
Basic dataStandard ID: GB/T 26743-2011 (GB/T26743-2011)Description (Translated English): Fiber reinforced composite bars for civil engineering Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q23 Classification of International Standard: 83.120 Word Count Estimation: 10,157 Date of Issue: 2011-07-20 Date of Implementation: 2012-03-01 Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the structural engineering fiber reinforced composite reinforcement (hereinafter referred to as composite reinforcement) the terms and definitions, classification, specifications and marking, requirements, test methods, inspection rules, marking, packaging, transportation and storage and so on. This standard applies in civil engineering structures using force component reinforced material, diameter 20 mm below the fiber-reinforced composite material tendons. GB/T 26743-2011: Fiber reinforced composite bars for civil engineering---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fiber reinforced composite bars for civil engineering ICS 83.120 Q23 National Standards of People's Republic of China Structural engineering with fiber reinforced composite rebars Issued on. 2011-07-20 2012-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Building Materials Federation. The standard fiber-reinforced plastic by the National Standardization Technical Committee (SAC/TC39) centralized. This standard was drafted. China Metallurgical Construction Research Institute Limited. Participated in the drafting of this standard. Nanjing, the extension composite materials company, Shanghai University, Sinoma Science & Technology Co., Ltd., Overseas Chinese University. The main drafters of this standard. Yang Yongxin - filled bag Katherine tripod, Ouyang Yu, Dai Bi Fang, Huang Hui, Zhang. Structural engineering with fiber reinforced composite rebars1 ScopeThis standard specifies the structural engineering with fiber reinforced composite rebars (hereinafter referred to as composite reinforcement) terms and definitions, classifications, specifications and Marking, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to civil engineering structures in the force member reinforcing material, diameter less than 20mm fiber-reinforced composite materials Material tendons.2 Terms and definitionsThe following terms and definitions apply to this document. 2.1 Fiber-reinforced composite rebars fiberreinforcedcompositebars Continuous fiber bundle by pultrusion process to produce a rod-shaped fiber-reinforced composite material products. 3 classification, size and marking 3.1 Classification 3.1.1 reinforcing fiber types Fiber reinforced composites reinforced by carbon fiber composite material types into muscle (CFB), glass fiber reinforced composites (GFB) and aramid complex Composite material bars (AFB). 3.1.2 surface state Composites reinforced by surface state is divided into light line (P), threaded bars (S) and other (O). 3.2 Specifications 3.2.1 composite rebars can be divided according to the nominal diameter of 6mm, 8mm, 10mm, 12mm, 14mm, 20mm and other specifications. 3.2.2 composite rebars can be divided by the length of 2m, 4m, 6m, 10m, 20m and other specifications. 3.3 mark Composites reinforced by reinforcing fiber type code, surface condition, nominal diameter and length markers. Reinforcing fiber types code Surface condition Nominal diameter, mm Length, m Example. The length of 6m, nominal diameter 12mm, according to the standard production of glass fiber reinforced composite thread is marked as. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26743-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 26743-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26743-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26743-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
