GB/T 26661-2011 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26661-2011: Large SWP universal coupling with spider Status: Valid
Basic dataStandard ID: GB/T 26661-2011 (GB/T26661-2011)Description (Translated English): Large SWP universal coupling with spider Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J19 Classification of International Standard: 21.120.01 Word Count Estimation: 19,188 Date of Issue: 2011-06-16 Date of Implementation: 2012-03-01 Quoted Standard: GB/T 191; GB/T 197; GB/T 307.1; GB/T 1184; GB/T 1800.2; GB/T 3098.1; GB/T 3098.4; GB/T 4604; GB/T 4879; GB/T 6388; GB/T 13384; JB/T 5000.3; JB/T 5000.15 Regulation (derived from): Announcement of Newly Approved National Standards No. 9 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the SWP large cross shaft universal coupling (hereinafter referred to as large universal coupling) of the type, the basic parameters and dimensions, technical requirements, inspection rules and signs, packaging, storage and so on. This standard applies to join two different axes large universal joint drive shafts, the turning diameter is 600mm ~ 1200 mm, transmission nominal torque 1150kN �� m ~ 12500kN �� m, axis angle of 5 �� ~ 15 ��. GB/T 26661-2011: Large SWP universal coupling with spider---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Large SWP universal coupling with spider ICS 21.120.01 J19 National Standards of People's Republic of China SWP large cross shaft universal coupling Issued on. 2011-06-16 2012-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Types, basic parameters and dimensions 1 4. Technical Requirements 10 11 5 Inspection Rules 6 logo, packaging, storage 11 Appendix A (informative) universal coupling selection Note 13ForewordThis standard is in accordance with GB/T 1.1-2009 given rule drafting. This standard by the National Standardization Technical Committee of the machine shaft and accessories (SAC/TC109) and focal points. This standard was drafted. Taiyuan Heavy Industry Co., Ltd., Shanxi Hui Rong shaft limited liability company, the machine Productivity Promotion Center, Le Qing Joint Factory, Ruici transmission Machinery Co., Ltd. The main drafters of this standard. SOIL AND Mingcui new, Li Jintao, Huang Xiaojing, Liu Huogen, Deng Takami. SWP large cross shaft universal coupling1 ScopeThis standard specifies the SWP large cross shaft universal coupling (hereinafter referred to as a large universal coupling) the type, basic parameters and scale Inch, technical requirements, inspection rules and signs, packaging, storage and so on. This standard applies to shafting coupling two different axes of the large universal joint, its turning diameter of 600mm ~ 1200mm; Biography Hands nominal torque 1150kN · m ~ 12500kN · m; axis angle of 5 ° ~ 15 °.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 197 common thread tolerance GB/T 307.1 Rolling to the heart bearing tolerance GB/T 1184 shape and position tolerances without individual tolerance value GB/T 1800.2 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts limit bias Difference list GB/T 3098.1 Mechanical properties of fasteners Bolts screws and studs GB/T 3098.4 Mechanical properties of fasteners fine thread GB/T 4604 Rolling radial clearance GB/T 4879 rust-proof packaging GB/T 6388 transport package shipping mark GB/T 13384 mechanical and electrical products packaging General technical conditions JB/T 5000.3 Heavy Machinery General requirements - Part 3. welded JB/T 5000.15 Heavy Machinery General technical requirements - Part 15. Non-destructive testing of steel forgings 3 Types, basic parameters and dimensions Type 3.1 Large universal coupling types are divided into the following three (Table 1). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26661-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 26661-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26661-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26661-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
