GB/T 26060-2010 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26060-2010: Titanium and titanium alloy ingots Status: Valid
Basic dataStandard ID: GB/T 26060-2010 (GB/T26060-2010)Description (Translated English): Titanium and titanium alloy ingots Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H64 Classification of International Standard: 77.120 Word Count Estimation: 9,915 Date of Issue: 1/10/2011 Date of Implementation: 10/1/2011 Quoted Standard: GB/T 3620.1; GB/T 3620.2; GB/T 4698.1; GB/T 4698.2; GB/T 4698.3; GB/T 4698.4; GB/T 4698.5; GB/T 4698.6; GB/T 4698.7; GB/T 4698.8; GB/T 4698.9; GB/T 4698.10; GB/T 4698.11; GB/T 4698.12; GB/T 4698.13; GB/T 4698.14; GB/T 4698.15; GB/T 4698.16; GB/T 4698.17; GB/T 4698.18; GB/T 4698.19; GB/T 4698.20; GB/T 4698.21; GB/T 4698.22; GB/T 4698.23; GB/T 4698.24; GB/T 4698.25; GB/T 23605 Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies requirements for titanium and titanium alloy ingots, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates and contracts (or orders) content. This Standard is applicable to consumable vacuum arc furnace (VAR), electron beam cooling bed furnace (EBCHM) production of titanium and titanium alloy ingot casting round and rectangular flat ingots. GB/T 26060-2010: Titanium and titanium alloy ingots---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Titanium and titanium alloy ingots ICS 77.120 H64 National Standards of People's Republic of China Titanium and titanium alloy ingots Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this standard is the data appendix. The standard proposed by China Nonferrous Metals Industry Association. This standard Nonferrous Metals by the National Standardization Technical Committee. This standard by the Baoji Titanium Group Ltd., Baoji Titanium Industry Co., Ltd. is responsible for drafting. The main drafters of this standard. Fengjun Ning, Chen Feng, Guobin, Qiao Lu, Lixian Jun, Huang Yongguang. Titanium and titanium alloy ingots1 ScopeThis standard specifies the requirements for titanium and titanium alloy ingots, test methods, inspection rules, marking, packaging, transportation, storage, and quality certificate Contracts (or orders) content. This standard applies to vacuum consumable arc furnace (VAR), titanium electron beam cooling bed furnace (EBCHM) and titanium alloy round ingot production and moment Flat-shaped ingot.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3620.1 titanium and titanium alloys and chemical composition GB/T 3620.2 titanium and titanium alloy products of chemical composition and permissible variations GB/T 4698 (all parts) Sponge titanium, titanium and titanium alloys GB/T 23605 Titanium β transformation temperature measurement method3 Requirements3.1 ingot production and melting times Ingot melting and production times are shown in Table 1. Table 1 Grade production melting times GB/T 3620.1 in all grades VAR, EBCHM VAR least twice EBCHM once 3.2 Chemical composition 3.2.1 Designation and chemical composition Titanium and titanium alloy ingots of grades and chemical composition shall comply with GB/T 3620.1 of. 3.2.2 chemical composition and permissible variations When the demand side from the ingot retest samples for chemical composition analysis, the component tolerances shall comply with the provisions of GB/T 3620.2 of. 3.3 Dimensions and tolerances 3.3.1 ingot diameter (thickness or width) tolerances shall comply with the provisions of Table 2. Table 2 millimeters Diameter (thickness or width) ≤350 > 350 ~ 550 > 550 ~ 720 > 720 ~ 820 > 820 ~ 1040 > 1040 Tolerance -30 -40 -60 -70 -80 -100 3.3.2 the same maximum diameter ingots (thickness or width) and the minimum diameter (thickness or width) of the difference should be not less than its diameter (thickness or width Degree) allows deviation of a half. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26060-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26060-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26060-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26060-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
