GB/T 26008-2020 PDF EnglishUS$235.00 · In stock · Download in 9 seconds
GB/T 26008-2020: Battery Grade Lithium Hydroxide Monohydrate Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 26008: Historical versions
Similar standardsGB/T 26008-2020: Battery Grade Lithium Hydroxide Monohydrate---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT26008-2020NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.99 H 64 Replacing GB/T 26008-2010 Battery Grade Lithium Hydroxide Monohydrate Issued on: JUNE 02, 2020 Implemented on: APRIL 01, 2021 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 5 4 Technical Requirements... 6 5 Test Methods... 7 6 Inspection Rules... 7 7 Marking, Packaging, Transportation, Storage and Quality Certificates... 9 8 Order Form (or Contract) Contents... 10 Appendix A (Normative) Determination of Boron Content in Battery-Grade Lithium Hydroxide Monohydrate by Inductively Coupled Plasma Atomic Emission Spectrometry... 12 Appendix B (Normative) Determination of Magnetic Impurity Content in Battery- Grade Lithium Hydroxide Monohydrate by Inductively Coupled Plasma Atomic Emission Spectrometry... 17ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced GB/T 26008-2010 Battery Grade Lithium Hydroxide Monohydrate. Compared with GB/T 26008-2010, this Standard made the major changes as follows. --- Modify the scope of the standard (see Clause 1 of this Edition; Clause 1 of 2010 Edition); --- Add the terms and definitions (see Clause 3 of this Edition); --- Add the product appearance classification (see 4.1.2 of this Edition); --- Modify the expression method of main content of LiOH (see 4.2 of this Edition; 3.2 of 2010 Edition); --- Modify the content indicators of some elements (see 4.2 of this Edition; 3.2 of 2010 Edition); --- Increase the content requirements of boron (see 4.2 of this Edition); --- Increase the content requirements of magnetic impurity (see 4.3 of this Edition); --- Add granularity requirements (see 4.4 of this Edition); --- Modify the sampling provisions (see 6.4 of this Edition; 5.4 of 2010 Edition); --- Modify the packaging requirements (see 7.2 of this Edition; 6.2 of 2010 Edition); --- Add “determination of boron content in battery-grade lithium hydroxide monohydrate by inductively coupled plasma atomic emission spectrometry” (see Appendix A of this Edition); --- Add “determination of magnetic impurity content in battery-grade lithium hydroxide monohydrate by inductively coupled plasma atomic emission spectrometry” (see Appendix B of this Edition). This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Nonferrous Metals (SAC/TC 243). Drafting organizations of this Standard. Tianqi Lithium Corporation; Sichuan Yahua Industrial Group Co., Ltd.; Jiangxi Ganfeng Lithium Co., Ltd.; Jiangsu Ronghui General Lithium Industry Co., Ltd.; Jiangxi Dongpeng New Materials Co., Ltd.; Jiangxi Nanshi Lithium New Materials Co., Ltd.; Zhejiang Quzhou Yongzheng Lithium Battery Technology Co., Ltd.; Shandong Ruifu Lithium Industry Co., Ltd.; Sichuan Zhiyuan Lithium Industries Inc.; Jiangxi Huanli New Energy Technology Co., Ltd.; Sichuan Guorun New Materials Co., Ltd.; Jiangxi Albemarle Lithium Co., Ltd.; Xinjiang Nonferrous Metal Research Institute; Chengdu Chemphys Chemical Industry Co., Ltd.; Guizhou Zhongwei Resource Circulation Industry Development Co., Ltd.; Guangxi Tianyuan New Energy Materials Co., Ltd.; and Guangdong Brunp Recycling Technology Co., Ltd. Chief drafting staffs of this Standard. Zhang Bingyuan, Tu Mingjiang, Jiang Hucheng, Deng Hongyun, Feng Yan, Zhou Jianqi, Wang Bin, Li Qiang, Li Nanping, Peng Qiuhua, Zeng Xiaomao, Wang Yongdong, and Wu Jianjiang. The historical edition replaced by this Standard is as follows. --- GB/T 26008-2010. Battery Grade Lithium Hydroxide Monohydrate1 ScopeThis Standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, quality certificates and order forms (or contracts) contents of battery grade lithium hydroxide monohydrate. This standard is applicable to battery grade lithium hydroxide monohydrate produced by various methods.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB 190-2009 Packing Symbol of Dangerous Goods GB/T 191-2008 Packaging - Pictorial Marking for Handling of Goods GB/T 6678 General Principles for Sampling Chemical Products GB/T 11064 (all parts) Methods for Chemical Analysis of Lithium Carbonate, Lithium Hydroxide Monohydrate and Lithium Chloride GB/T 19077 Particle Size Analysis - Laser Diffraction Methods3 Terms and DefinitionsFor the purpose of this document, the following terms and definitions apply. 3.1 Magnetic impurity A substance that can be directly or indirectly absorbed by a ferromagnet. NOTE. It mainly refers to the magnetic substances in the transition elements, such as iron, chromium, nickel, zinc and their alloys. It refers to the combined amount of four elements of iron, chromium, nickel and zinc in this Standard.4 Technical Requirements4.1 Product classification 4.1.1 Battery grade lithium hydroxide monohydrate is divided into three designations according to chemical composition. LiOH•H2O-D1, LiOH•H2O-D2 and LiOH•H2O-D3. 4.1.2 Battery grade lithium hydroxide monohydrate is divided into crystal type and fine powder type according to appearance. 4.2 Chemical composition The chemical composition of battery grade lithium hydroxide monohydrate shall conform to the provisions of Table 1. 4.3 Magnetic impurity The magnetic impurity content in the product shall conform to the provisions of Table 2.5 Test Methods5.1 The chemical composition of the product shall be analyzed in accordance with the provisions of GB/T 11064 and Appendix A. 5.2 The magnetic impurity of the product shall be analyzed in accordance with the provisions of Appendix B. 5.3 The granularity of the product shall be analyzed in accordance with GB/T 19077. 5.4 The appearance quality of the product shall adopt the visual inspection method.6 Inspection Rules6.1 Inspection and acceptance 6.1.1 The product shall be inspected by the supplier to ensure that the product quality meets the requirements of this Standard and the order form (or contract); and fill in the quality certificate. 6.1.2 The purchaser shall inspect the received products in accordance with the provisions of this Standard. If the inspection results are inconsistent with the provisions of this Standard and the order form (or contract), they shall submit to the supplier in written form, which shall be resolved through consultation between the supplier and the purchaser. Objections pertaining to appearance quality shall be submitted within one month from the date of receipt of the product; objections pertaining to other properties shall be submitted within three months from the date of receipt of the product. If arbitration is required, it shall be negotiated by both parties. 6.2 Batching Products shall be submitted for acceptance in batches; and each batch of products shall consist of the same designation and the same mixture. The net weight of each batch of products shall not exceed 10t. When supplied in large-batch, the method of batching may be determined through consultation between the supplier and the purchaser. 6.3 Inspection items Each batch of products shall be inspected for chemical composition, magnetic impurity, granularity, and appearance quality. The inspection items shall conform to the provisions of Table 3. 6.4 Sampling and sample preparation 6.4.1 Sampling method The product sampling shall use a rigid polyvinyl chloride sampler; and the sampling tube is inserted into the 2/3 bag along the center of the bag. The taken sample is mixed well and then reduced to about 1000g by the quartering method. 6.4.2 Sampling quantity It shall be performed according to the provisions of GB/T 6678; the sampling quantity shall conform to the provisions of Table 4. 6.5 Determination of inspection results 6.5.1 If the inspection results of chemical composition, magnetic impurity, and granularity of the product are unqualified, double the number of samples from this batch of products shall be taken to repeat the inspection for the unqualified items. If the repeated inspection results are all qualified, the entire batch of products shall be qualified. If there are still unqualified samples in the repeated inspection results, this batch of products is determined to be unqualified. 6.5.2 If the appearance quality of the product is unqualified, this batch of products is determined to be unqualified.7 Marking, Packaging, Transportation, Storage andQuality Certificates 7.1 Marking The product shall indicate. a) Product name; b) Batch number; c) Net weight; d) Designation; e) Appearance; f) Name of the supplier; g) Number of this Standard; h) Place of origin; i) “Corrosive substance” mark in Table 2 of GB 190-2009; j) "Fear of rain" mark in Table 1 of GB/T 191-2008; k) Production license number for Industrial product. 7.2 Packaging 7.2.1 Crystal type product of battery grade lithium hydroxide monohydrate is packed by bags internally lined polyethylene (PE); externally cover the polypropylene (PP) bags or two to three-layer paper bags. The internal bag is tied or heat-sealed; and the sealing seam of the external bag is firm. 7.2.2 Fine powder type product of battery grade lithium hydroxide monohydrate is lined with aluminum-plastic composite bags and filled with nitrogen for protection; and is packaged with plastic film bags externally. The internal bag is heat-sealed, and the sealing seam of external bag is firm. 7.2.3 If there are other requirements for the packaging method of the product, the supplier and the purchaser shall negotiate. The net weight of each bag is executed according to customer requirements. 7.3 Transportation Avoid contact with acid when transporting the product; and prevent the packaging bag from being damaged when handling; and pay attention to moisture proof. 7.4 Storage The product shall be stored in a dry, acid-free environment. The storage period shall not exceed half a year.8 Order Form (or Contract) ContentsThe order form (or contract) for the products listed in this Standard shall include at least the following contents. a) Product name; b) Designation; c) Appearance; d) Net weight and number of pieces; e) Number of this Standard; f) others. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 26008-2020 be delivered?Answer: The full copy PDF of English version of GB/T 26008-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 26008-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26008-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 26008-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 26008-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26008-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 26008-2020?A step-by-step guide to download PDF of GB/T 26008-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 26008-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
