GB/T 25992-2010 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25992-2010: Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials -- Dimensions
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25992-2010	114	Add to Cart	3 days	Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials -- Dimensions	Valid

Similar standards

GB/T 33524.2   GB/T 5104   GB/T 972   GB/Z 29014.1   GB/Z 29014.2   GB/Z 29014.100   

Basic data

Standard ID: GB/T 25992-2010 (GB/T25992-2010)
Description (Translated English): Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials -- Dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.20
Word Count Estimation: 6,671
Date of Issue: 1/10/2011
Date of Implementation: 7/1/2011
Quoted Standard: GB/T 1800.2; GB/T 2075
Adopted Standard: ISO 15917-2007, IDT
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies solid carbide and ceramic ball straight shank end mill type and size, carbide and ceramic materials according to GB/T2075 requirements.

GB/T 25992-2010: Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials -- Dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials. Dimensions ICS 25.100.20 J41 National Standards of People's Republic of China GB/T 25992-2010/ISO 15917.2007 Solid carbide straight shank and ceramic ball mills size (ISO 15917.2007, IDT) Issued on. 2011-01-10 2011-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to using ISO 15917.2007 "Solid carbide and ceramic ball straight shank end mill size" (in English). This standard is equivalent translation ISO 15917.2007. For ease of use, this standard made the following editorial changes. --- Remove the foreword to international standards; --- Use. "" Instead of a comma is used as decimal point "." The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Chen Shichang, Zeng Yu ring, Sun Xiaoyan. GB/T 25992-2010/ISO 15917.2007 Solid carbide straight shank and ceramic ball mills size

1 Scope

This standard specifies the overall ceramic and carbide straight shank ball end mill type and size, carbide and ceramic materials Press GB/T 2075 regulations.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1800.2 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts limit bias Table difference (GB/T 1800.2-2009, ISO 286-2. 1988, ISO Systemoflimitsandfits-Part 2. Tablesofstandard tolerancegradesandlimitdeviationsforholesandshafts, MOD) GB/T 2075 Classification and use of cutting large groups and groups of application of hard cutting materials classification code (GB/T 2075- 2007, ISO 513.2004, IDT)

3 whole ball end mill type

Solid carbide end mill and ceramic ball has the following two types. --- Type 1, short overall ball mills, according to Figure 1 and Table 1; --- Type 2, the overall long ball mills, according to Figure 2 and Table 2.

4 Dimensions

Short overall ball end mill shown in Figure 1 and Table 1; overall long ball end mill shown in Figure 2 and Table 2. Figure 1 Type 1 --- Short overall ball mills GB/T 25992-2010/ISO 15917.2007 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25992-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25992-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25992-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25992-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.