GB/T 25976-2010 English PDFUS$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25976-2010: Ships and marine technology -- Position-indicating lights for life-saving appliance -- Testing, inspection and marking of production units Status: Valid
Basic dataStandard ID: GB/T 25976-2010 (GB/T25976-2010)Description (Translated English): Ships and marine technology -- Position-indicating lights for life-saving appliance -- Testing, inspection and marking of production units Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U63 Classification of International Standard: 47.020.70 Word Count Estimation: 12,165 Date of Issue: 1/10/2011 Date of Implementation: 5/1/2011 Quoted Standard: IMO A.689-17, Adopted Standard: ISO 24408-2005, IDT Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies with a variety of life-saving equipment for use with position-indicating lights of product testing and inspection and labeling requirements, including the lights on the lifeboat. Specifically applicable to 1974 in line with the International Convention for the Safety of Life at Sea, as amended (SOLAS) requirements for the ships to be used, in line with the IMO LSA Code, and by the national maritime security management authority or agency type approval of position-indicating lights. In addition to manufacturing position indicating lamps shall comply with IMO requirements, may be considered for other basic rules for position-indicating lights. GB/T 25976-2010: Ships and marine technology -- Position-indicating lights for life-saving appliance -- Testing, inspection and marking of production units---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Ships and marine technology. Position-indicating lights for life-saving appliance. Testing, inspection and marking of production units ICS 47.020.70 U63 National Standards of People's Republic of China Ships and marine technology Position-indicating lights of life-saving equipment Product testing, inspection and marking Testing, inspectionandmarkingofproductionunits (ISO 24408.2005, IDT) Issued on. 2011-01-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 24408.2005 "Ships and marine technology - Lifesaving equipment position-indicating lamp product testing, inspection and marking" (In English). This standard is equivalent to translate ISO 24408.2005. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- With a comma "," instead supplement symbol "-"; --- Delete foreword international standards; --- Of expression in accordance with the provisions of GB/T 1.1-2000 also been modified. Appendix A of this standard is an informative annex. The standard proposed by China State Shipbuilding Corporation. This standard by the national marine ship marine electrical equipment Standardization Technical Committee Technical Committee (SAC/TC12/SC6) centralized. This standard was drafted. Technical and Economic Research Institute of China Shipbuilding Industry. The main drafters of this standard. Yan Ping, Gong Zhixiang, Yang Hongfeng.IntroductionThis standard will work with the International Maritime Organization (IMO) "life-saving equipment (LSA) rule" and related IMO instruments commonly used to assess Accredited position-indicating lights of various products and the relevant requirements of IMO consistency. Part of the provisions of this standard exceeds the IMO requirements, see the IMO's Recommendation on testing of life-saving equipment [amended by MSC.81 (70) Resolution A.689 (17) Resolution], the contents of the product for testing and inspection of parts without any special requirements. However, Section 2 of the document Require manufacturers to develop quality control procedures to ensure the production of life-saving equipment and marine safety management organization recognized styling products to achieve phase With standards and keep all product testing records have been completed. This standard specifies the procedures comply with the above requirements. According to the provisions of the standard, manufacturers will be able to verify the products and IMO recommendations consistency. Ships and marine technology Position-indicating lights of life-saving equipment Product testing, inspection and marking1 ScopeThis standard specifies the various life-saving equipment for use with position-indicating lights of product testing and inspection and labeling requirements, including the lifeboat Lights. Specifically applicable to 1974 in line with international SOLAS as amended (SOLAS) requirements for ships used, in line with IMO the LSA Code, and by the management authority or the National Maritime Safety Agency type approval of position-indicating lights. Position-indicating light manufacturing Addition to complying with IMO requirements, may also consider other fundamental rules adapted to position-indicating lamp.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. IMOA.689 (17) resolution, the IMOMSC.81 (70) resolution, as amended to modify the recommendations of the International Maritime Organization lifesaving equipment testing3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Batch lot Under the same conditions and within the same time-made products, the products as much as possible with the same type, grade, size and composition. 3.2 Ambient temperature ambienttemperature 20 ℃ ± 5 ℃ temperature. 3.3 Freshwater freshwater Conductivity of not more than 1800μS water. 3.4 Seawater seawater By dissolving 3.5% compared with the fresh water dilution of sodium chloride prepared from artificial sea water.4 General4.1 Manufacturing Guidelines 4.1.1 The manufacturer shall have appropriate manufacturing quality control system to ensure that products produced using the same production method using the same Kind of manufacturing materials, and comply with the National Maritime Safety management authority or agency recognized by the same quality criteria type testing. Note 1. Chapter 4 will not limit the improvement of the manufacturing process, improve the final product should not cause harmful effects. Note 2. Recommended compliance with ISO 9001.2000 quality management system requirements. 4.1.2 Recommended product testing and inspection procedures included in the manufacture of effective quality control system, Refer to Appendix A. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25976-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25976-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25976-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25976-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
