GB/T 25951.3-2010 English PDFUS$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25951.3-2010: Nickel and nickel alloys -- Terms and definitions -- Part 3: Wrought products and castings Status: Obsolete
Basic dataStandard ID: GB/T 25951.3-2010 (GB/T25951.3-2010)Description (Translated English): Nickel and nickel alloys -- Terms and definitions -- Part 3: Wrought products and castings Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H62 Classification of International Standard: 77.150.40 Word Count Estimation: 10,196 Date of Issue: 2010-12-23 Date of Implementation: 2011-09-01 Adopted Standard: ISO 6372-3-1989, MOD Regulation (derived from): National Standard Approval Announcement 2010 No.10 (Total No.165) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions of nickel and nickel alloys processed products and castings. This section applies to processed products of nickel and nickel alloys and castings. GB/T 25951.3-2010: Nickel and nickel alloys -- Terms and definitions -- Part 3: Wrought products and castings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Nickel and nickel alloys Terms and definitions Part 3. Wrought products and castings ICS 77.150.40 H62 National Standards of People's Republic of China Nickel and nickel alloys - Terms and definitions Part 3. processed products and castings Part 3. Wroughtproductsandcastings (ISO 6372-3. 1989, MOD) Issued on. 2010-12-23 2011-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 25951-2010 "nickel and nickel alloys - Terms and definitions" contains the following three parts. --- GB/T 25951.1-2010 "nickel and nickel alloys - Terms and definitions - Part 1. Materials"; --- GB/T 25951.2-2010 "nickel and nickel alloys - Terms and definitions - Part 2. refined products"; This is Part 3. The partial modification of international standards ISO 6372-3. 1989 "nickel and nickel alloys - Terms and definitions - Part 3. Cast and processed products Member. " This section reg number and ISO 6372-3. 1989 reg number controls the Appendix to this section B. This part of ISO 6372-3. 1989 Differences refer to the section in Appendix C, these differences in a single vertical line (︱) identified in the terms they are involved in the margin. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is responsible for drafting unit. Jinchuan Group Limited. This section participated in the drafting unit. China Nonferrous Metals Industry Quality Standards and Metrology Institute, aluminum Shenyang Nonferrous Metals Processing Co., Ltd. The main drafters of this section. Lin Hsiu-ying, in Xiaoxia, Yang Lijuan, Wang Li, Wang Ling canal. Nickel and nickel alloys - Terms and definitions Part 3. processed products and castings1 ScopeThis section GB/T 25951 specifies the terms and definitions of nickel and nickel alloy castings and machining products. This section applies to nickel and nickel alloy castings and machining products.2 Terms and definitions2.1 Processed products wroughtproducts By heat and (or) method of cold plastic deformation (such as extrusion, forging, hot-rolled, cold-rolled or drawn, alone or in combination with the use of) the product obtained. Processed products are bar, wire, tubing, profiles, sheet, strip, foil, forgings. Note. The definition of processed products described in Appendix A. 2.1.1 Rod rod/bar Uniform cross-section along the entire length of the solid processed products, with the straight delivery. Circular cross-section, oval, square, rectangular, equilateral triangles or regular polygon (see FIG. 1). Square, rectangular, triangular or Polygonal cross-section of the product, along its entire length may have roundings. Note. For rectangular bars. --- Thickness exceeding one tenth of the width; --- The term "rectangular bar" includes "oblate stick" (flattenedcircles) and "near-rectangular bar" (modifiedrectangles), whose two opposite edges of a convex arc, and the other two pairs Long straight and parallel sides are equilateral. 2.1.2 Wire wire Cross-section along its entire length a uniform solid processed products to roll delivery. Circular cross-section, oval, square, rectangular, equilateral triangles or regular polygon (see FIG. 1). Square, rectangular, triangular or Polygonal cross-section of the product, along its entire length may have roundings. Note. For rectangular wire. --- Thickness exceeding one tenth of the width; --- The term "rectangular line" includes "oblate line" (flattenedcircles) and "near-line rectangle" (modifiedrectangles), whose two opposite edges of a convex arc, and the other two pairs Long straight and parallel sides are equilateral. 2.1.3 Pipe tube Along its entire length a uniform cross-section with only one enclosed cavity, and wall thickness hollow processed products, with straight or rolls Availability. Circular cross-section, oval, square, rectangular, equilateral triangles or regular polygon (see FIG. 2), along the entire length of the circle can be inverted Angle square, rectangular, equilateral triangles or regular polygonal cross-section of the hollow product, if the same cross-sectional view of the inner and outer concentric polygons, And have the same shape and orientation, can be considered a pipe. Note 1. The pipe can also be perforated or sheet, strip after forming, welding and forming. Note 2. the general shape of the pipe as defined above, by bending, cutting threads, boring, reducing, expanding and tapered hollow pipe products classified as a class. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25951.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25951.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25951.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25951.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
