GB/T 25495-2010 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25495-2010: Test methods for metal releasing characteristics of getters Status: Valid
Basic dataStandard ID: GB/T 25495-2010 (GB/T25495-2010)Description (Translated English): Test methods for metal releasing characteristics of getters Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L90 Classification of International Standard: 31-030 Word Count Estimation: 11,131 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): GB/T 6626.1-1986; GB/T 9506.2-1988; GB/T 9506.6-1988 Quoted Standard: GB/T 4314, GB/T 25494-2010 Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the getter metal release characteristics testing methods, such as the release of mercury released getter total amount of mercury, the standard release of mercury, mercury release characteristics and thermal stability of the test method, evaporable getter was barium barium amount of test methods, nitrogen-doped barium getter film distribution testing methods. This standard applies to devices with vacuum getter. GB/T 25495-2010: Test methods for metal releasing characteristics of getters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test methods for metal releasing characteristics of getters ICS 31-030 L90 National Standards of People's Republic of China Replacing GB/T 6626.1-1986, GB/T 9506.6-1988, GB/T 9506.2-1988 Getter metal release characteristics of test methods Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is the integration of the following criteria after revising. --- GB/T 6626.1-1986 "mercury releasing getter Performance Test Method Test Method of mercury releasing getter mercury release characteristics"; --- GB/T 9506.6-1988 "nitrogen-doped barium getter film distribution test methods"; --- GB/T 9506.2-1988 "barium evaporable getter barium test method too." This standard compared with the original standard main changes are as follows. --- Cancel the test method mercury releasing getter mercury release characteristics of the terminology in the normative references in the new GB/T 4314 "Getter term"; --- The GB/T 6626.1-1986 "Test Method for mercury releasing getter performance test method mercury releasing getter mercury release characteristics" and GB/T 9506.2-1988 "barium evaporable getter barium test method was" in the test system, method of consolidation; --- Cancel test equipment fat-free ball; --- The size of the test chamber test according to the intended use classification by metal emission classification; --- The release amount of mercury, barium obtained after weighing the amount of heating time by a change within 5min 15min; --- Mercury releasing characteristic tested by 400 ℃ began to raise to the start 500 ℃; --- Cancel mean, standard deviation calculation method; --- The amount of barium was canceled conformance testing; --- Cancel the test report format; --- The GB/T 9506.2-1988 "barium evaporable getter barium test method was" in evapotranspiration curve drawing methods from steam Time Control statements be revised; --- According to GB/T 1.1-2000 requirements were revised format. This standard replaces the following criteria. --- GB/T 6626.1-1986 "mercury releasing getter Performance Test Method Test Method of mercury releasing getter mercury release characteristics"; --- GB/T 9506.6-1988 "nitrogen-doped barium getter film distribution test methods"; --- GB/T 9506.2-1988 "barium evaporable getter barium test method too." This standard by the National Standardization Technical Committee of semiconductor equipment and materials and focal points. This standard was drafted. Nanjing SAES Huadong Vacuum Material Co., Ltd., the Ministry of Information Industry and the Institute of Electronics Industry Standardization, China Electronics Technology Group Corporation 12th Research Institute. The main drafters of this standard. Letter Xue Ying, Guo Weibin, ZHANG Ju first, Liu Yun. This standard replaces the standards previously issued as follows. --- GB/T 6626.1-1986; --- GB/T 9506.6-1988; --- GB/T 9506.2-1988. Getter metal release characteristics of test methods1 ScopeThis standard specifies the characteristics of getter metal release test methods, such as the total amount of mercury releasing mercury releasing getter, the standard amount of mercury release, mercury release characteristic curve Test Method for wire and thermal stability, barium evaporable getter method was tested a barium amount of nitrogen-doped barium getter film distribution test methods. This standard applies to devices with a vacuum getter.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4314 getter term GB/T 25494-2010 getter composition analysis test methods3 TermsGB/T 4314 as determined by the terms and definitions apply to this standard. Test Method 4 release of metal 4.1 Principle Getter metal emission tests, such as the total amount of mercury releasing mercury releasing getter, the standard interpretation of the amount of mercury, barium evaporable getter yield of barium, etc., were collected Determination of the amount of metal released by "poor weight method." 4.2 Test equipment and conditions When evaporable getter tested, recommended the sample chamber and the high frequency induction coil size are shown in Table 1. The specimen shall be in cylindrical specimens Rooms, and high-frequency induction coil center. Typically, the sample is placed on top of the sample chamber can be directed towards the evapotranspiration horizontal position, using coaxial Evapotranspiration. For antenna type pallet color picture tube getter, for the ET direction towards the opposite glass wall, at least with the sample specimen support frame Chamber axis angle of 30 °; the sample in order to prevent displacement occurs during evapotranspiration, evapotranspiration should be tangential. see picture 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25495-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25495-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25495-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25495-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
