GB/T 25473-2010 English PDFUS$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25473-2010: Line regulator used in welding, cutting and allied processes Status: Valid
Basic dataStandard ID: GB/T 25473-2010 (GB/T25473-2010)Description (Translated English): Line regulator used in welding, cutting and allied processes Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N11 Classification of International Standard: 17.100 Word Count Estimation: 24,245 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Quoted Standard: GB/T 321; GB/T 7899; GB/T 15464; GB/T 25112 Adopted Standard: ISO 7291-1999, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the welding, cutting and allied processes pipe reducer (hereinafter referred to as pressure reducer) definitions and naming, symbols and units manufacturing requirements, physical characteristics, type tests and procedures and signs, instructions, packaging, storage, inspection rules and other requirements. This standard applies to the pressure of compressed gas cylinders in less than 30MPa or methyl acetylene allene mixture (MPS), acetylene convergence to the high-pressure gas mains, adjust to the desired output pressure of the single-stage and two-stage pipeline Less voltage regulator. This standard does not apply to GB/T 7899 described the mounted directly on the cylinder pressure reducer. GB/T 25473-2010: Line regulator used in welding, cutting and allied processes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Line regulator used in welding, cutting and allied processes ICS 17.100 N11 National Standards of People's Republic of China Welding, cutting and similar process piping reducer Lineregulatorusedinwelding, cuttingandaliedprocesses (ISO 7291..1999, Gasweldingequipment- cuttingandaliedprocessesupto300bar, MOD) 2010-12-01 release 2011-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 definition and naming 1 3.1 Terms and definitions 1 3.2 named 1 4 symbols and units 2 4.1 Symbol 2 4.2 Unit 2 5 manufacturing requirements 3 5.1 Material 3 5.2 Design, processing and assembly 3 Physical properties 4 6.1 Pressure 4 6.2 Flow 5 6.3 Working characteristics 6 7 Type Test Procedure 6 7.1 General 6 7.2 Test prototype and essential documents 6 7.3 Test conditions 6 7.4 Performance test 7 7.5 Mechanics test 9 7.6 Test for persistence of signs 11 8 mark, instruction manual, packing, storage 11 8.1 mark 11 For ease of use, this standard has also made the following editorial changes. --- instead of using the decimal point '' as the decimal point ','; - to remove the preamble of international standards; --- convert the unit of measurement bar into the legal unit of measurement MPa; Appendix A, Appendix B, Appendix C, Appendix D and Appendix E of this standard are informative. This standard is proposed by the China Machinery Industry Federation. This standard is nationalized by the National Industrial Process Measurement and Control Standardization Technical Committee (SAC/TC124). This standard is responsible for drafting units. Xi'an Industrial Automation Instrumentation Research Institute. This standard drafting unit. Shanghai reducer plant Co., Ltd., Ningbo Longxing Hange Technology Co., Ltd., Xuzhou Hongye instrumentation Ltd., Ningbo Jiangbei Xingda welding and cutting decompression instrument factory, Lierda Instrument Co., Ltd., Ningbo City, margin of gas control equipment Manufacturing Co., Red Flag Instrument (Changxing) Co., Ltd., Jiangsu Weimar Control System Co., Ltd. The main drafters of this standard. Jin Jianhua, Jane Leping, Chen Dinglong, Zong Pengju, Yu Miaojun. Welding, cutting and similar process piping reducer 1 ScopeThis standard specifies the definition and naming, symbols and units of piping pressure reducers (hereinafter referred to as pressure reducers) for welding, cutting and the like, Manufacturing requirements, physical characteristics, type tests and procedures and signs, instructions for use, packaging, storage, inspection rules and other requirements. This standard applies to the pressure within 30MPa 1) gas cylinders compressed gas or methyl acetylene - propadiene mixture (MPS), dissolved acetylene A high pressure gas that converges to the manifold and adjusts to the required output pressure for single and double stage piping reducers. This standard does not apply to the pressure reducer directly mounted on the cylinder as described in GB/T 7899. 1) 15 ℃ when the maximum inflatable cylinder pressure of 30MPa. 5 --- export joint; 6 --- reducer valve body; 7 --- pressure reducer cover; 8 --- adjustment screw. Figure 1 Schematic diagram of the pressure reducer and parts ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25473-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25473-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25473-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25473-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
