GB/T 25381-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25381-2010: Genealogy of wind turbine generator system
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25381-2010	149	Add to Cart	2 days	Genealogy of wind turbine generator system	Valid

Similar standards

GB/T 25387.1   GB/T 25388.1   GB/T 25385   GB/T 25383   GB/T 25390   GB/T 25386.1   

Basic data

Standard ID: GB/T 25381-2010 (GB/T25381-2010)
Description (Translated English): Genealogy of wind turbine generator system
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F11
Classification of International Standard: 27.180
Word Count Estimation: 5,531
Date of Issue: 2010-11-10
Date of Implementation: 2011-03-01
Quoted Standard: GB/T 2900.53; GB 18451.1; GB/T 18451.2; GB/T 20320
Regulation (derived from): Announcement of Newly Approved National Standards No. 8 of 2010 (total 163)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the unit capacity A (plate fixed things out of power) greater than or equal to 100 kW grid- type horizontal axis wind turbine series model. This standard applies to wind power products research and production enterprises and use the units and grid horizontal axis wind turbine selection.

GB/T 25381-2010: Genealogy of wind turbine generator system

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Genealogy of wind turbine generator system ICS 27.180 F11 National Standards of People's Republic of China Wind turbine series spectrum Issued on. 2010-11-10 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee on mechanical wind (SAC/TC50) centralized. This standard was drafted. China Agricultural Machinery Institute Hohhot branch. Drafters of this standard. Wang Jianping, Song after the election. Wind turbine series spectrum

1 Scope

This standard specifies a series of stand-alone capacity (rated output power) greater than or equal 100kW grid-type horizontal axis wind turbine Spectrum. This standard applies to wind power products research and production enterprises and use the units and network type horizontal axis wind turbine selection.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2900.53 Electrotechnical terminology Wind turbine generator (GB/T 2900.53-2001, IEC 60050-415.1999, IDT) GB 18451.1 wind turbine safety requirements (GB 18451.1-2001, IEC 61400-1.1999, IDT) GB/T 18451.2 wind turbine power performance test (GB/T 18451.2-2003, IEC 61400-12.1998, IDT) GB/T 20320 wind turbine power quality measurement and assessment methods (GB/T 20320-2006, IEC 61400-21. 2001, IDT)

3 Terms and Definitions

Terms and definitions GB/T 2900.53 established apply to this standard.

4 General requirements

Series spectrum of wind turbines in the basic elements of external conditions, structural design and other aspects should be consistent with GB 18451.1 relevant Provisions. Power characteristics series model in the wind turbine should be GB/T 18451.2 method of measurement. Power output quality series model in wind turbines should meet the relevant provisions of GB/T 20320 of.

5 series model

5.1 Wind wheel Wind turbine blades should be made up of three components. 5.2 Capacity (rated output power) rotor diameter series 5.2.1 Priority Series Table 1 Priority series. Table 1 priority series capacity (KW) 6,006,607,508,501,000 1300 1500 Wind wheel diameter (M) 43 44 46 47 4,850,525,860,627,077 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25381-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25381-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25381-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25381-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.